| 1. |
- Engstrand, Johanna, et al.
(författare)
-
Hydroxyapatite formation on a novel dental cement in human saliva
- 2012
-
Ingår i: ISRN Dentistry. - : Hindawi Limited. - 2090-438X. ; , s. 624056-
-
Tidskriftsartikel (refereegranskat)abstract
- Dental materials have to meet high standards regarding mechanical strength and handling properties. There is however only a limited amount of research that has been devoted to natural formation of hydroxyapatite (HA) in contact with the materials. The objective of the current investigation was to study the surface reactions occurring in human salvia on a novel dental cement. Ceramir Crown & Bridge, a bioceramic luting agent intended for permanent cementation of conventional oral prosthetics, was evaluated by immersing discs made from the cement in human saliva and phosphate buffered saline (PBS) for seven days, after which they were dried and analyzed. The analytical methods used in order to verify HA formation on the surface were grazing incidence X-ray diffraction (GI-XRD), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). All results showed that HA was formed on the surfaces of samples stored in saliva as well as on samples stored in PBS. The possibility of a dental luting cement to promote natural formation of HA at the tooth interface increases the stability and durability of the system and could help prevent secondary caries.
|
|
| 2. |
- Persson, Cecilia, et al.
(författare)
-
Nano grain sized zirconia–silica glass ceramics for dental applications
- 2012
-
Ingår i: Journal of the European Ceramic Society. - : Elsevier BV. - 0955-2219 .- 1873-619X. ; 32:16, s. 4105-4110
-
Tidskriftsartikel (refereegranskat)abstract
- Glass ceramics based on lithium disilicates are commonly used in dental veneers and crowns. Alternative materials with improved mechanical properties may be of interest for more demanding applications, e.g. bridgeworks. In this study, a sol-gel method was optimized to produce nano grain-sized zirconia-silica glass ceramics with properties adequate for dental applications. The material properties were compared to those of IPS e.max (R) CAD, a commercially available lithium disilicate. The zirconia-silica glass ceramic was found to be translucent, with a transmittance of over 70%, and possessed excellent corrosion resistance. It also presented a somewhat lower elastic modulus but higher hardness than the lithium disilicate, and with the proper heat treatment a higher fracture toughness was achieved for the zirconia-silica glass ceramic. In conclusion, the material produced in this study showed promising results for use in dental applications, but the production method is sensitive and large specimen sizes may be difficult to achieve.
|
|
| 3. |
|
|
| 4. |
|
|
