1. |
- Abbasi, Saeed, et al.
(author)
-
A study of airborne wear particles generated from organic railway brake pads and brake discs
- 2011
-
In: Wear. - UK : Elsevier. - 0043-1648 .- 1873-2577. ; 273:1, s. 93-99
-
Journal article (peer-reviewed)abstract
- Brake pads on wheel-mounted disc brakes are often used in rail transport due to their good thermal properties and robustness. During braking, both the disc and the pads are worn. This wear process generates particles that may become airborne and thus affect human health. The long term purpose of ‘Airborne particles in Rail transport’ project is to gain knowledge on the wear mechanisms in order to find means of controlling the number and size distribution of airborne particles. In this regard, a series of full-scale field tests and laboratory tests with a pin-on-disc machine have been conducted. The morphology and the matter of particles, along with their size distribution and concentration, have been studied. The validity of results from the pin-on-disc simulation has been verified by the field test results. Results show an ultra-fine peak for particles with a diameter size around 100 nm in diameter, a dominant fine peak for particles with a size of around 350 nm in diameter, and a coarse peak with a size of 3-7 μm in diameter. Materials such as iron, copper, aluminium, chromium, cobalt, antimony, and zinc have been detected in the nano-sized particles.
|
|
2. |
- Björ, Ove, et al.
(author)
-
Reduced mortality rates in a cohort of long-term underground iron-ore miners
- 2013
-
In: American Journal of Industrial Medicine. - : Wiley. - 0271-3586 .- 1097-0274. ; 56:5, s. 531-540
-
Journal article (peer-reviewed)abstract
- Background Historically, working in iron-ore mines has been associated with an increased risk of lung cancer and silicosis. However, studies on other causes of mortality are inconsistent and in the case of cancer incidence, sparse. The aim of this study was to examine the association between iron-ore mining, mortality and cancer incidence.Methods A 54-year cohort study on iron-ore miners from mines in northern Sweden was carried out comprising 13,000 workers. Standardized rate ratios were calculated comparing the disease frequency, mortality, and cancer incidence with that of the general population of northern Sweden. Poisson regression was used to evaluate the association between the durations of employment and underground work, and outcome.Results Underground mining was associated with a significant decrease in adjusted mortality rate ratios for cerebrovascular and digestive system diseases, and stroke. For several outcomes, elevated standardized rate ratios were observed among blue-collar workers relative to the reference population. However, only the incidence of lung cancer increased with employment time underground (P<0.001).Conclusions Long-term iron-ore mining underground was associated with lower rates regarding several health outcomes. This is possibly explained by factors related to actual job activities, environmental exposure, or the selection of healthier workers for long-term underground employment.Am. J. Ind. Med. 56:531540, 2013. (c) 2013 Wiley Periodicals, Inc.
|
|
3. |
- Burström, Lage, et al.
(author)
-
A follow-up study of welders’ exposure to vibration in a heavy engineering production workshop
- 2010
-
In: Journal of Low Frequency Noise Vibration and Active Control. - : Sage Publications. - 0263-0923 .- 1461-3484 .- 2048-4046. ; 29:1, s. 33-39
-
Journal article (peer-reviewed)abstract
- Manual work involving vibrating power tools is associated with symptoms that include vascular, neurological and musculoskeletal disorders. This study examines the vibration exposure of welders to determine the change between 1987 and 2008. Vibration measurements on handheld tools were used to evaluate the acceleration and the daily exposure time was determined by subjective rating. From these data, the 8-hour equivalent vibration exposure A(8), has been calculated. During the period, the A(8) decreased from 3.9 m/s2 to 1.9 m/s2. It was concluded that this decrease is the result of fewer vibrating tools and a decrease in daily exposure time. Although the daily vibration exposure has decreased over the study time, for some welders the daily vibration exposure A(8) is still above the action value set by the EU directive on vibration. This means more effort should be spent to decrease vibration exposure.
|
|
4. |
- Burström, Lage, et al.
(author)
-
Back and neck pain due to working in a cold environment : a cross-sectional study of male construction workers
- 2013
-
In: International Archives of Occupational and Environmental Health. - : Springer Science and Business Media LLC. - 0340-0131 .- 1432-1246. ; 86:7, s. 809-813
-
Journal article (peer-reviewed)abstract
- OBJECTIVE: To study whether work in a cold environment increased the risk of musculoskeletal symptoms in the neck and low back among construction workers. METHODS: This cross-sectional study is based on a cohort of male workers in the Swedish construction industry that participated in regular health examinations through a nationwide occupational health service. The analysis is based on workers examined from 1971 to 1974, who answered a questionnaire including questions about neck and back pain. The cohort consists of 134,754 male workers, including 16,496 office workers and foremen. The health examinations of the workers were conducted in provinces covering Sweden from the south to the north, and temperature data were collected for the provinces. In the analyses, the results were adjusted for age, BMI and use of nicotine. RESULTS: The prevalence's of neck and low back pain were higher among manual construction workers than among foremen and office workers (24.3 vs. 8.6 % and 16.5 vs. 6.2 %, respectively); the corresponding adjusted ORs for low back and neck pain were 1.59 (95 % CI 1.52-1.66) and 1.39 (95 % CI 1.30-1.49), respectively. Workers in the northern and central provinces had higher ORs for low back and neck pain compared to workers in the southern province. The test for trends showed an increased risk of developing low back and neck pain with decreased outdoor temperature. CONCLUSIONS: Outdoor work in a cold environment may increase the risk of low back and neck pain.
|
|
5. |
|
|
6. |
- Burström, Lage, 1954-, et al.
(author)
-
White fingers, cold environment, and vibration : exposure among Swedish construction workers
- 2010
-
In: Scandinavian Journal of Work, Environment and Health. - : Scandinavian Journal of Work, Environment and Health. - 0355-3140 .- 1795-990X. ; 36:6, s. 509-513
-
Journal article (peer-reviewed)abstract
- Objectives The aim of this study was to examine the association between white fingers, cold environment, and exposure to hand–arm vibration (HAV). The hypothesis was that working in cold climate increases the risk of white fingers.Methods The occurrence of white fingers was investigated as a cross-sectional study in a cohort of Swedish male construction workers (N=134 757). Exposure to HAV was based on a job-exposure matrix. Living in the north or south of Sweden was, in a subgroup of the cohort, used as an indicator of the exposure to cold environment (ie, living in the north meant a higher exposure to cold climate). The analyses were adjusted for age and use of nicotine products (smoking and snuff).Results HAV-exposed workers living in a colder climate had a higher risk for white fingers than those living in a warmer climate [odds ratio (OR) 1.71, 95% confidence interval (95% CI) 1.42–2.06]. As expected, we found that HAV-exposed workers had an increased risk compared to controls (OR 2.02, 95% CI 1.75–2.34). The risk for white fingers increased with increased level of exposure to HAV and also age.Conclusions Cold environment increases the risk for white fingers in workers occupationally exposed to HAV. The results underscore the need to keep exposure to HAV at workplaces as low as possible especially in cold climate.
|
|
7. |
- Carlsson, Daniel, et al.
(author)
-
Neurosensory sequelae assessed by thermal and vibrotactile perception thresholds after local cold injury
- 2014
-
In: International Journal of Circumpolar Health. - : Informa UK Limited. - 1239-9736 .- 2242-3982. ; 73
-
Journal article (peer-reviewed)abstract
- Background. Local freezing cold injuries are common in the north and sequelae to cold injury can persist many years. Quantitative sensory testing (QST) can be used to assess neurosensory symptoms but has previously not been used on cold injury patients.Objective. To evaluate neurosensory sequelae after local freezing cold injury by thermal and vibrotactile perception thresholds and by symptom descriptions.Design. Fifteen patients with a local freezing cold injury in the hands or feet, acquired during military training, were studied with QST by assessment of vibrotactile (VPT), warmth (WPT) and cold (CPT) perception thresholds 4 months post-injury. In addition, a follow-up questionnaire, focusing on neurovascular symptoms, was completed 4 months and 4 years post-injury.Results. QST demonstrated abnormal findings in one or both affected hands for VPT in 6 patients, for WPT in 4 patients and for CPT in 1 patient. In the feet, QST was abnormal for VPT in one or both affected feet in 8 patients, for WPT in 6 patients and for CPT in 4 patients. Freezing cold injury related symptoms, e. g. pain/discomfort when exposed to cold, cold sensation and white fingers were common at 4 months and persisted 4 years after the initial injury.Conclusions. Neurosensory sequelae after local freezing cold injury, in terms of abnormal thermal and/or vibration perception thresholds, may last at least 4 months after the initial injury. Symptoms such as pain/discomfort at cold exposure, cold sensations and white fingers may persist at least 4 years after the initial injury.
|
|
8. |
- Ericsson, Pernilla, et al.
(author)
-
Exposure assessment in different occupational groups at a hospital using Quick Exposure Check (QEC) : A pilot study
- 2012
-
In: Work. - 1051-9815 .- 1875-9270. ; 41:Supplement 1, s. 5718-5720
-
Journal article (peer-reviewed)abstract
- In order to test the feasibility and sensitivity of the ergonomic exposure assessment tool Quick Exposure Check (QEC), a pilot-study was conducted. The aim was to test QEC in different occupational groups to compare the exposure in the most common work task with the exposure in the work task perceived as the most strenuous for the neck/shoulder region, and to test intra-observer reliability. One experienced ergonomist observed 23 workers. The mean observation time was 45 minutes, waiting time and time for complementary questions included. The exposure scores varied between the different occupational groups as well as between workers within the occupational groups. Eighteen workers rated their most common work task as also being the most strenuous for the neck/shoulder region. For the remaining five workers, the mean exposure score were higher both for the neck and shoulder/arm in the most common work task. Intra-observer reliability shows agreement in 86% of the exposure interactions in the neck and in 71% in the shoulder/arm. QEC seems to fulfill the expectations of being a quick, sensible and practical exposure assessment tool that covers physical risk factors in the neck, upper extremities and low back.
|
|
9. |
- Ericsson, Pernilla, et al.
(author)
-
Reliability testing of two ergonomic risk assessment tools
- 2012
-
Conference paper (other academic/artistic)abstract
- INTRODUCTIONQuick Exposure Check (QEC¹) and Rapid Upper Limb Assessment (RULA²) are two ergonomic risk assessment tools that have been designed to be useful for ergonomists assessing musculoskeletal risk factors in upper extremities at workplaces.AIMThe aim was to describe the variation between and within ergonomists assessments using QEC and RULA, and to compare the two tools regarding within-observer agreement.SUBJECTS & METHODSTwenty ergonomists observed five different work tasks twice with three weeks in between, watching video clips. They made ergonomic risk assessments using both QEC and RULA.The observed work tasks were: Window replacement, nailing a wooden pallet, toilet cleaning, instrumentation in an operating theatre, and sorting post.For the statistical analyses, percent agreement and kappa value was used.RESULTSThere was a variation in assessments between the ergonomists in all positions and movements both when using QEC and RULA, except from assessing armposition when observing window replacement using QEC, where all ergonomists assessed the same position (figure 1).The ergonomists had higher percent agreement between observation one and two using QEC compared with RULA (table 1).CONCLUSIONThere was a variation when assessing positions and movements in different worktasks both between ergonomists and within the same ergonomist using both QEC and RULA. However the agreement between two observations within observers was higher for QEC.
|
|
10. |
|
|