| 1. |
|
|
| 2. |
- Qiao, Xi Min, et al.
(author)
-
Re-positive Cases of Nucleic Acid Tests in Discharged Patients With COVID-19 : A Follow-Up Study
- 2020
-
In: Frontiers in Medicine. - : Frontiers Media SA. - 2296-858X. ; 7
-
Journal article (peer-reviewed)abstract
- Background: The frequent emergence of the re-positive patients with COVID-19 is a potential threat worldwide. This study aimed to describe data from admission to follow-up for patients with COVID-19 and analyze the possible causes for re-positive nucleic acid tests to provide more scientific basis for reducing the numbers of re-positive patients after discharge. Methods: We retrospectively recorded 15 patients with COVID-19 admitted to the Xianyang Central Hospital, China. The baseline, exposure histories, clinical syndromes, laboratory characteristics, nucleic acid, and follow-up tests were analyzed, and the radiological characteristics of re-positive patient at different periods were compared. Results: Eight (53.33%) patients had the history of travel to Wuhan, four (26.67%) patients had close contact with confirmed patients, and one (6.67%) patient had close contact with suspected patients. After treatment, all patients had two consecutively negative nucleic acid tests and were discharged from hospital. All patients were followed up for more than 14 days, and the average time from discharge to the first follow-up was 14.67 ± 3.31 days (from 9 to 22 days). Most patients showed no clinical symptoms and negative nucleic acid tests, while one patient had an itchy throat, her CT scan showed a light density shadow in the right lower lobe of the lung, and the nucleic acid was once again positive. The second follow-up of the other 14 patients (except the re-positive one) was conducted 20.80 ± 7.78 days (from 13 to 30 days) after discharge, and all of them had negative nucleic acid tests. The positive patient was immediately readmitted and received a new round of treatment. Her family members and colleagues remained healthy until now. Conclusions: The quality of nucleic acid testing reagents should be enhanced, and the training of nucleic acid sampling operators should be strengthened to reduce the false-negative results in the nucleic acid of SARS-CoV-2; the clinical specimens of throat and nasopharynx swabs can be collected at the same time; IgM- and IgG-specific antibodies of SARS-CoV-2 should be carried out for discharged patients; the radiological characteristics should be evaluated strictly; and the discharge standard can be specified according to the baseline and severity of disease of patients.
|
|
| 3. |
- Beal, Jacob, et al.
(author)
-
Robust estimation of bacterial cell count from optical density
- 2020
-
In: Communications Biology. - : Springer Science and Business Media LLC. - 2399-3642. ; 3:1
-
Journal article (peer-reviewed)abstract
- Optical density (OD) is widely used to estimate the density of cells in liquid culture, but cannot be compared between instruments without a standardized calibration protocol and is challenging to relate to actual cell count. We address this with an interlaboratory study comparing three simple, low-cost, and highly accessible OD calibration protocols across 244 laboratories, applied to eight strains of constitutive GFP-expressing E. coli. Based on our results, we recommend calibrating OD to estimated cell count using serial dilution of silica microspheres, which produces highly precise calibration (95.5% of residuals <1.2-fold), is easily assessed for quality control, also assesses instrument effective linear range, and can be combined with fluorescence calibration to obtain units of Molecules of Equivalent Fluorescein (MEFL) per cell, allowing direct comparison and data fusion with flow cytometry measurements: in our study, fluorescence per cell measurements showed only a 1.07-fold mean difference between plate reader and flow cytometry data.
|
|
| 4. |
|
|
| 5. |
- Dan, Lilin, et al.
(author)
-
Design of Offset Spatial Modulation OFDM
- 2021
-
In: IEEE Transactions on Communications. - : Institute of Electrical and Electronics Engineers (IEEE). - 0090-6778 .- 1558-0857. ; 69:9, s. 6267-6280
-
Journal article (peer-reviewed)abstract
- In this paper, the idea of offset spatial modulation (OSM) is integrated with orthogonal frequency division multiplexing (OFDM), toward an efficient design to bridge their advantages. Compared to its conventional counterpart as spatial modulation (SM)-OFDM, the proposed OSM-OFDM scheme aims at providing a simplified implementation structure with less number of radio frequency (RF) chains, by introducing an offset between the RF chain and the index of the activated transmit antenna on each subcarrier. Specifically, three types of offset antenna selection (OAS) methods are developed to meet different scene requirements for different number of available RF chains. Furthermore, through theoretical analysis, we quantify the bit error rate upper bounds of OSM-OFDM with different types of OAS methods. Finally, extensive computer simulations demonstrate that OSM-OFDM provides a flexible tradeoff among implementation cost, computation complexity and error performance.
|
|
| 6. |
- Dijulio, Douglas D., et al.
(author)
-
Simulating neutron transport in long beamlines at a spallation neutron source using Geant4
- 2020
-
In: Journal of Neutron Research. - 1023-8166. ; 22:2-3, s. 183-189
-
Journal article (peer-reviewed)abstract
- The transport of neutrons in long beamlines at spallation neutron sources presents a unique challenge for Monte-Carlo transport calculations. This is due to the need to accurately model the deep-penetration of high-energy neutrons through meters of thick dense shields close to the source and at the same time to model the transport of low- energy neutrons across distances up to around 150 m in length. Typically, such types of calculations may be carried out with MCNP-based codes or alternatively PHITS. However, in recent years there has been an increased interest in the suitability of Geant4 for such types of calculations. Therefore, we have implemented supermirror physics, a neutron chopper module and the duct-source variance reduction technique for low- energy neutron transport from the PHITS Monte-Carlo code into Geant4. In the current work, we present a series of benchmarks of these extensions with the PHITS software, which demonstrates the suitability of Geant4 for simulating long neutron beamlines at a spallation neutron source, such as the European Spallation Source, currently under construction in Lund, Sweden.
|
|
| 7. |
- Fang, Li Tai, et al.
(author)
-
Establishing community reference samples, data and call sets for benchmarking cancer mutation detection using whole-genome sequencing
- 2021
-
In: Nature Biotechnology. - : Springer Nature. - 1087-0156 .- 1546-1696. ; 39:9, s. 1151-1160
-
Journal article (peer-reviewed)abstract
- Tumor-normal paired DNA samples from a breast cancer cell line and a matched lymphoblastoid cell line enable calibration of clinical sequencing pipelines and benchmarking 'tumor-only' or 'matched tumor-normal' analyses. The lack of samples for generating standardized DNA datasets for setting up a sequencing pipeline or benchmarking the performance of different algorithms limits the implementation and uptake of cancer genomics. Here, we describe reference call sets obtained from paired tumor-normal genomic DNA (gDNA) samples derived from a breast cancer cell line-which is highly heterogeneous, with an aneuploid genome, and enriched in somatic alterations-and a matched lymphoblastoid cell line. We partially validated both somatic mutations and germline variants in these call sets via whole-exome sequencing (WES) with different sequencing platforms and targeted sequencing with >2,000-fold coverage, spanning 82% of genomic regions with high confidence. Although the gDNA reference samples are not representative of primary cancer cells from a clinical sample, when setting up a sequencing pipeline, they not only minimize potential biases from technologies, assays and informatics but also provide a unique resource for benchmarking 'tumor-only' or 'matched tumor-normal' analyses.
|
|
| 8. |
- Gao, Xiang, et al.
(author)
-
Planting Age Identification and Yield Prediction of Apple Orchard Using Time-Series Spectral Endmember and Logistic Growth Model
- 2023
-
In: Remote Sensing. - : MDPI AG. - 2072-4292. ; 15:3, s. 642-642
-
Journal article (peer-reviewed)abstract
- In response to significant shifts in dietary and lifestyle preferences, the global demand for fruits has increased dramatically, especially for apples, which are consumed worldwide. Growing apple orchards of more productive and higher quality with limited land resources is the way forward. Precise planting age identification and yield prediction are indispensable for the apple market in terms of sustainable supply, price regulation, and planting management. The planting age of apple trees significantly determines productivity, quality, and yield. Therefore, we integrated the time-series spectral endmember and logistic growth model (LGM) to accurately identify the planting age of apple orchard, and we conducted planting age-driven yield prediction using a neural network model. Firstly, we fitted the time-series spectral endmember of green photosynthetic vegetation (GV) with the LGM. By using the four-points method, the environmental carrying capacity (ECC) in the LGM was available, which serves as a crucial parameter to determine the planting age. Secondly, we combined annual planting age with historical apple yield to train the back propagation (BP) neural network model and obtained the predicted apple yields for 12 counties. The results show that the LGM method can accurately estimate the orchard planting age, with Mean Absolute Error (MAE) being 1.76 and the Root Mean Square Error (RMSE) being 2.24. The strong correlation between orchard planting age and apple yield was proved. The results of planting age-driven yield prediction have high accuracy, with the MAE up to 2.95% and the RMSE up to 3.71%. This study provides a novel method to accurately estimate apple orchard planting age and yields, which can support policy formulation and orchard planning in the future.
|
|
| 9. |
- Gong, J., et al.
(author)
-
Sex differences in dementia risk and risk factors: Individual-participant data analysis using 21 cohorts across six continents from the COSMIC consortium
- 2023
-
In: Alzheimers & Dementia. - : Wiley. - 1552-5260 .- 1552-5279. ; 19:8, s. 3365-3378
-
Journal article (peer-reviewed)abstract
- IntroductionSex differences in dementia risk, and risk factor (RF) associations with dementia, remain uncertain across diverse ethno-regional groups. MethodsA total of 29,850 participants (58% women) from 21 cohorts across six continents were included in an individual participant data meta-analysis. Sex-specific hazard ratios (HRs), and women-to-men ratio of hazard ratios (RHRs) for associations between RFs and all-cause dementia were derived from mixed-effect Cox models. ResultsIncident dementia occurred in 2089 (66% women) participants over 4.6 years (median). Women had higher dementia risk (HR, 1.12 [1.02, 1.23]) than men, particularly in low- and lower-middle-income economies. Associations between longer education and former alcohol use with dementia risk (RHR, 1.01 [1.00, 1.03] per year, and 0.55 [0.38, 0.79], respectively) were stronger for men than women; otherwise, there were no discernible sex differences in other RFs. DiscussionDementia risk was higher in women than men, with possible variations by country-level income settings, but most RFs appear to work similarly in women and men.
|
|
| 10. |
- Guan, Tianfu, et al.
(author)
-
Decoding the Self-Assembly Plasmonic Interface Structure in a PbS Colloidal Quantum Dot Solid for a Photodetector
- 2023
-
In: ACS Nano. - : American Chemical Society (ACS). - 1936-0851 .- 1936-086X. ; 17:22, s. 23010-23019
-
Journal article (peer-reviewed)abstract
- Hybrid plasmonic nanostructures have gained enormous attention in a variety of optoelectronic devices due to their surface plasmon resonance properties. Self-assembled hybrid metal/quantum dot (QD) architectures offer a means of coupling the properties of plasmonics and QDs to photodetectors, thereby modifying their functionality. The arrangement and localization of hybrid nanostructures have an impact on exciton trapping and light harvesting. Here, we present a hybrid structure consisting of self-assembled gold nanospheres (Au NSs) embedded in a solid matrix of PbS QDs for mapping the interface structures and the motion of charge carriers. Grazing-incidence small-angle X-ray scattering is utilized to analyze the localization and spacing of the Au NSs within the hybrid structure. Furthermore, by correlating the morphology of the Au NSs in the hybrid structure with the corresponding differences observed in the performance of photodetectors, we are able to determine the impact of interface charge carrier dynamics in the coupling structure. From the perspective of architecture, our study provides insights into the performance improvement of optoelectronic devices.
|
|
