| 1. |
- Dunham, I, et al.
(author)
-
The DNA sequence of human chromosome 22
- 1999
-
In: Nature. - : Springer Science and Business Media LLC. - 0028-0836 .- 1476-4687. ; 402:6761, s. 489-495
-
Journal article (peer-reviewed)
|
|
| 2. |
- Yuan, XiMing, et al.
(author)
-
The establishment of two cell lines from a mouse uterine cervical carcinoma (U14) and their metastatic phenotype changes
- 1995
-
In: Clinical and Experimental Metastasis. - 0262-0898 .- 1573-7276. ; 13:6, s. 463-73
-
Journal article (peer-reviewed)abstract
- This paper studies the heterogeneity of metastatic potential of murine cervical carcinoma (U14). Two cell lines, P11-90 and L10-90, were established from a pulmonary metastatic substrain (U14AP11) and a lymphatic metastatic substrain (U14AL10), which were selected from U14 in vivo after 11 and 10 passages, respectively. The biologic differences between the two cell lines are as follows. (1) The cells of the P11-90 line grow more rapidly compared with the L10-90 line. From the 40th passage the medium pH was different. (2) The median number of chromosomes in P11-90 and L10-90 was 72 and 64, respectively; the rates of gap aberration were 88% and 78%, respectively. (3) The number of T lymphocytes and T helper lymphocytes in the peripheral blood from hosts with P11-90 were higher than that of hosts transplanted with L10-90, but the number of B lymphocytes in the latter was larger than that in the former. (4) The metastatic potential of each cell line partially decreased compared to the relative tumor substrain, but their organ preference still remained and the transplant locations, axillary or footpad, had a prominent influence on their metastatic behavior. To observe the effects of metastatic target organs on the metastatic phenotypes of tumor cells, as well as to explore a method for the establishment and maintenance of the metastatic organ preference of tumor cells, conditioned medium (CM) from pulmonary or lymphatic node diploid cells was added to the culture medium of P11-90 and L10-90. Two sublines, P + P11-90 and Ln + L10-90, were thus established. Using stereological methods we found that the majority of P + P11-90 cells became larger and their nuclei also increased in size compared with their parental lines, but the majority of Ln + L10-90 cells became smaller in size, though the nuclei were enlarged. The pulmonary metastatic rate and lymphatic metastatic rate of P + P11-90, as well as the lymphatic metastatic rate of Ln + L10-90, were restored dramatically. The results suggest that by taking advantage of the interaction between tumor cells and the CM of host cells the metastatic potential of tumor cell lines can be maintained in vitro. Our work may offer an experimental model for the manipulation of metastasis of cell lines coming from the same parent strain but with different metastatic potentials.(ABSTRACT TRUNCATED AT 400 WORDS)
|
|
| 3. |
|
|
| 4. |
- Zhang, Y Z, et al.
(author)
-
Tissue response to commercial silicone and polyurethane elastomers after different sterilization procedures
- 1996
-
In: Biomaterials. - : Elsevier BV. - 1878-5905 .- 0142-9612. ; 17:23, s. 2265-2272
-
Journal article (peer-reviewed)abstract
- Two different commercial polymeric materials, a silicone and a polyurethane (PUR), were studied with regard to correlations between the chemical and physical compositions of the polymer surfaces and the biological response on implantation. Test specimens of the materials were manufactured according to standard procedures. The specimens were implanted in rats for 10 and 90 days. Before implantation the polymers were sterilized in three different ways, namely, beta irradiation, ethylene oxide sterilization and steam sterilization. The polymers were characterized before and after the implantation with respect to the chemical composition and the morphology of the surfaces. After implantation the biological response was evaluated by counting numbers of macrophages, giant cells, fibroblasts and other cells present at the surfaces. The thickness of the fibrous capsule surrounding the test specimens was measured at the thickest and thinnest parts. PUR surfaces showed signs of degradation already after sterilization and after 10 to 90 days of implantation, pits and cracks appeared, especially in the ethylene oxide sterilized samples. However, differences in the biological responses were small and independent of the sterilization method. After 10 days of implantation the capsule thickness and the amounts of cell material adhering at the surfaces were different, and it appears that the silicone rubber induces more tissue response than PUR. The differences in the early tissue response evened out after 90 days implantation time and a steady state situation evolved, which was similar for the silicone and the polyurethane.
|
|
| 5. |
- Zhang, Z. X., et al.
(author)
-
Effects of loading rate on rock fracture
- 1999
-
In: International Journal of Rock Mechanics And Mining Sciences. - 1365-1609 .- 1873-4545. ; 36:5, s. 597-611
-
Journal article (peer-reviewed)abstract
- By means of a wedge loading applied to a short-rod rock fracture specimen tested with the MTS 810 or SHPB (split Hopkinson pressure bar), the fracture toughness of Fangshan gabbro and Fangshan marble was measured over a wide range of loading rates, =10−2–106 MPa m1/2 s−1. In order to determine the dynamic fracture toughness of the rock as exactly as possible, the dynamic Moiré method and strain–gauge method were used in determining the critical time of dynamic fracture. The testing results indicated that the critical time was generally shorter than the transmitted wave peak time, and the differences between the two times had a weak increasing tendency with loading rates. The experimental results for rock fracture showed that the static fracture toughness KIc of the rock was nearly a constant, but the dynamic fracture toughness KId of the rock (≥104 MPa m1/2 s−1) increased with the loading rate, i.e. log(KId)=a log +b. Macroobservations for fractured rock specimens indicated that, in the section (which was perpendicular to the fracture surface) of a specimen loaded by a dynamic load, there was clear crack branching or bifurcation, and the higher the loading rate was, the more branching cracks occurred. Furthermore, at very high loading rates (≥106 MPa m1/2 s−1) the rock specimen was broken into several fragments rather than only two halves. However, for a statically fractured specimen there was hardly any crack branching. Finally, some applications of this investigation in engineering practice are discussed.
|
|
