| 1. |
- Kristan, Matej, et al.
(author)
-
The Ninth Visual Object Tracking VOT2021 Challenge Results
- 2021
-
In: 2021 IEEE/CVF INTERNATIONAL CONFERENCE ON COMPUTER VISION WORKSHOPS (ICCVW 2021). - : IEEE COMPUTER SOC. - 9781665401913 ; , s. 2711-2738
-
Conference paper (peer-reviewed)abstract
- The Visual Object Tracking challenge VOT2021 is the ninth annual tracker benchmarking activity organized by the VOT initiative. Results of 71 trackers are presented; many are state-of-the-art trackers published at major computer vision conferences or in journals in recent years. The VOT2021 challenge was composed of four sub-challenges focusing on different tracking domains: (i) VOT-ST2021 challenge focused on short-term tracking in RGB, (ii) VOT-RT2021 challenge focused on "real-time" short-term tracking in RGB, (iii) VOT-LT2021 focused on long-term tracking, namely coping with target disappearance and reappearance and (iv) VOT-RGBD2021 challenge focused on long-term tracking in RGB and depth imagery. The VOT-ST2021 dataset was refreshed, while VOT-RGBD2021 introduces a training dataset and sequestered dataset for winner identification. The source code for most of the trackers, the datasets, the evaluation kit and the results along with the source code for most trackers are publicly available at the challenge website(1).
|
|
| 2. |
- Gu, Jian, et al.
(author)
-
Visualizing Material Processing via Photoexcitation-Controlled Organic-Phase Aggregation-Induced Emission
- 2021
-
In: RESEARCH. - : American Association for the Advancement of Science (AAAS). - 2639-5274. ; 2021
-
Journal article (peer-reviewed)abstract
- Aggregation-induced emission (AIE) has been much employed for visualizing material aggregation and self-assembly. However, water is generally required for the preparation of the AIE aggregates, the operation of which limits numerous material processing behaviors. Employing hexathiobenzene-based small molecules, monopolymers, and block copolymers as different material prototypes, we herein achieve AIE in pure organic phases by applying a nonequilibrium strategy, photoexcitation-controlled aggregation. This strategy enabled a dynamic change of molecular conformation rather than chemical structure upon irradiation, leading to a continuous aggregation-dependent luminescent enhancement (up to similar to 200-fold increase of the luminescent quantum yield) in organic solvents. Accompanied by the materialization of the nonequilibrium strategy, photoconvertible self-assemblies with a steady-state characteristic can be achieved upon organic solvent processing. The visual monitoring with the luminescence change covered the whole solution-to-film transition, as well as the in situ photoprocessing of the solid-state materials.
|
|
| 3. |
- Hu, Yingying, et al.
(author)
-
Visible light excited and temperature-responsive phosphorescent system in a phase-changing matrix
- 2024
-
In: Materials Advances. - : ROYAL SOC CHEMISTRY. - 2633-5409.
-
Journal article (peer-reviewed)abstract
- Reversibly switching visible light excited phosphorescence emission by external stimuli is highly challenging. Herein, we report a series of tetrakis(arylthio)benzene derivatives with a D-A structure, exhibiting visible-light excited room-temperature phosphorescence. Significantly, the emission from their crystalline powder state responded to mechanical forces, attributed to alterations in molecular stacking changes, resulting in their phosphorescence color changes. Moreover, the monomer and aggregated phosphorescence transition could be reversibly switched by temperature when doping these molecules into a phase-changing matrix saturated fatty acid (FA) because the FA matrix is transformed between solid and fluid states under different temperatures. In addition, multi-color luminescent materials were also obtained by further introducing triphenylamine dye molecules. Finally, these doping systems exhibited excellent application potential in temperature indication and anti-counterfeiting. This successful design strategy provides a new idea for preparing reversible external stimuli-responsive phosphorescent materials. D-A-type tetrakis(arylthio)benzene derivatives exhibited visible-light excited phosphorescence, mechanical-stimuli responsive phosphorescence in solid and temperature-induced phosphorescence changes in the phase-changing doping state.
|
|
| 4. |
- Li, Yiran, et al.
(author)
-
Photoinduced Radical Emission in a Coassembly System
- 2021
-
In: Angewandte Chemie International Edition. - : John Wiley & Sons. - 1433-7851 .- 1521-3773. ; 60:44, s. 23842-23848
-
Journal article (peer-reviewed)abstract
- Developing radical emission at ambient conditions is a challenging task since radical species are unstable in air. In the present work, we overcome this challenge by coassembling a series of tricarbonyl-substituted benzene molecules with polyvinyl alcohol (PVA). The strong hydrogen bonds between the guest dopants and the PVA host matrix protect the free radicals of carbonyl compounds after light irradiation, leading to strong solid state free radical emission. Changing temperature and peripheral functional groups of the tricarbonyl-substituted benzenes can influence the intensity of the radical emission. Quantum-chemical calculations predict that such free radical fluorescence originates from anti-Kasha D-2 -> D-0 vertical emission by the anion radicals. The photoinduced radical emission by the tricarbonyl-substituted benzenes was successfully utilized for information encryption application.
|
|
| 5. |
- Li, Zhongyu, et al.
(author)
-
Lighting up solid states using a rubber
- 2021
-
In: Nature Communications. - : Springer Nature. - 2041-1723. ; 12:1
-
Journal article (peer-reviewed)abstract
- It is crucial and desirable to develop green and high-efficient strategies to regulate solid-state structures and their related material properties. However, relative to solution, it is more difficult to break and generate chemical bonds in solid states. In this work, a rubbing-induced photoluminescence on the solid states of ortho-pyridinil phenol family was achieved. This rubbing response relied on an accurately designed topochemical tautomerism, where a negative charge, exactly provided by the triboelectric effect of a rubber, can induce a proton transfer in a double H-bonded dimeric structure. This process instantaneously led to a bright-form tautomer that can be stabilized in the solid-state settings, leading to an up to over 450-fold increase of the fluorescent quantum yield of the materials. The property can be repeatedly used due to the reversibility of the tautomerism, enabling encrypted applications. Moreover, a further modification to the structure can be accomplished to achieve different properties, opening up more possibilities for the design of new-generation smart materials. Changes in molecular properties due to stimuli response are critically important for the development of new materials. However, most processes are slow or inefficient in the solid state. Here the authors demonstrate property switching in the solid state using a rubbing-induced tautomerism in multiple hydrogen-bonded donor-acceptor couples.
|
|
| 6. |
- Shen, Shen, et al.
(author)
-
Edible Long-Afterglow Photoluminescent Materials for Bioimaging
- 2024
-
In: Advanced Materials. - : WILEY-V C H VERLAG GMBH. - 0935-9648 .- 1521-4095.
-
Journal article (peer-reviewed)abstract
- Confining luminophores into modified hydrophilic matrices or polymers is a straightforward and widely used approach for afterglow bioimaging. However, the afterglow quantum yield and lifetime of the related material remain unsatisfactory, severely limiting the using effect especially for deep-tissue time-resolved imaging. This fact largely stems from the dilemma between material biocompatibility and the quenching effect of water environment. Herein an in situ metathesis promoted doping strategy is presented, namely, mixing approximate to 10-3 weight ratio of organic-emitter multicarboxylates with inorganic salt reactants, followed by metathesis reactions to prepare a series of hydrophilic but water-insoluble organic-inorganic doping afterglow materials. This strategy leads to the formation of edible long-afterglow photoluminescent materials with superior biocompatibility and excellent bioimaging effect. The phosphorescence quantum yield of the materials can reach dozens of percent (the highest case: 66.24%), together with the photoluminescent lifetime lasting for coupes of seconds. Specifically, a long-afterglow barium meal formed by coronene salt emitter and BaSO4 matrix is applied into animal experiments by gavage, and bright stomach afterglow imaging is observed by instruments or mobile phone after ceasing the photoexcitation with deep tissue penetration. This strategy allows a flexible dosage of the materials during bioimaging, facilitating the development of real-time probing and theranostic technology. A universal strategy is proposed to construct edible photoluminescent long-afterglow materials by embedding luminophore multicarboxylates into a series of inorganic salt lattices. Particularly, edible afterglow barium meal formed by coronene salt doped BaSO4 can be applied into gastrointestinal afterglow imaging captured by instruments or mobile phone. image
|
|
| 7. |
- Shen, Shen, et al.
(author)
-
Making multi-twisted luminophores produce persistent room-temperature phosphorescence
- 2023
-
In: Chemical Science. - : ROYAL SOC CHEMISTRY. - 2041-6520 .- 2041-6539. ; 14:4, s. 970-978
-
Journal article (peer-reviewed)abstract
- Multi-twisted molecules, especially those with more than four branched rotation axes, have served as superior prototypes in diverse fields like molecular machines, optical materials, sensors, and so forth. However, due to excessive non-radiative relaxation of these molecules, it remains challenging to address their persistent room-temperature phosphorescence (pRTP), which limits their further development. Herein, we develop a host-guest energy-transfer relay strategy to improve the phosphorescence lifetime of multi-twisted luminophores by over thousand-fold to realize pRTP, which can be witnessed by the naked eye after removing the excitation light source. Moreover, we employ photoexcitation-induced molecular rearrangement to further prolong the phosphorescence lifetime, which, to the best of our knowledge, is the first example of photoactivation in ordered host-guest systems. Our systems show superior humidity and oxygen resistance, enabling long-term (at least over 9-12 months) stability of the pRTP properties. By achieving pRTP of multi-twisted luminophores, this work can advance the understanding of molecular photophysical mechanisms and guide the study of more molecular systems that are difficult to achieve pRTP.
|
|
| 8. |
- Sun, Hao, et al.
(author)
-
Engineering Tunable Ratiometric Dual Emission in Single Emitter-based Amorphous Systems
- 2024
-
In: Angewandte Chemie International Edition. - : WILEY-V C H VERLAG GMBH. - 1433-7851 .- 1521-3773.
-
Journal article (peer-reviewed)abstract
- Molecular emitters with multi-emissive properties are in high demand in numerous fields, while these properties basically depend on specific molecular conformation and packing. For amorphous systems, special molecular arrangement is unnecessary, but it remains challenging to achieve such luminescent behaviors. Herein, we present a general strategy that takes advantage of molecular rigidity and S1-T1 energy gap balance for emitter design, which enables fluorescence-phosphorescence dual-emission properties in various solid forms, whether crystalline or amorphous. Subsequently, the amorphism of the emitters based polymethyl methacrylate films endowed an in situ regulation of the dual-emissive characteristics. With the ratiometric regulation of phosphorescence by external stimuli and stable fluorescence as internal reference, highly controllable luminescent color tuning (yellow to blue including white emission) was achieved. There properties together with a persistent luminous behavior is of benefit for an irreplaceable set of optical information combination, featuring an ultrahigh-security anti-counterfeiting ability. Our research introduces a concept of eliminating the crystal-form and molecular-conformational dependence of complex luminescent properties through emitter molecular design. This has profound implications for the development of functional materials. A molecular structural strategy enabling single emitter based dual-emission properties in various solid forms is presented. The developed amorphous films endow in situ regulation of the dual-emissive characteristics to show highly controllable multiple luminescent color tuning (yellow to blue including white emission), which benefits to the construction of an irreplaceable set of optical information combination.image
|
|
| 9. |
- Wang, Xuran, et al.
(author)
-
De Novo Design of Spiro-Type Hole-Transporting Material: Anisotropic Regulation Toward Efficient and Stable Perovskite Solar Cells
- 2024
-
In: RESEARCH. - : AMER ASSOC ADVANCEMENT SCIENCE. - 2096-5168. ; 7
-
Journal article (peer-reviewed)abstract
- 2,2′,7,7′-Tetrakis(N,N-di-p-methoxyphenyl)-amine-9,9′-spirobifluorene (Spiro-OMeTAD) represents the state-of-the-art hole-transporting material (HTM) in n-i-p perovskite solar cells (PSCs). However, its susceptibility to stability issues has been a long-standing concern. In this study, we embark on a comprehensive exploration of the untapped potential within the family of spiro-type HTMs using an innovative anisotropic regulation strategy. Diverging from conventional approaches that can only modify spirobifluorene with single functional group, this approach allows us to independently tailor the two orthogonal components of the spiro-skeleton at the molecular level. The newly designed HTM, SF-MPA-MCz, features enhanced thermal stability, precise energy level alignment, superior film morphology, and optimized interfacial properties when compared to Spiro-OMeTAD, which contribute to a remarkable power conversion efficiency (PCE) of 24.53% for PSCs employing SF-MPA-MCz with substantially improved thermal stability and operational stability. Note that the optimal concentration for SF-MPA-MCz solution is only 30 mg/ml, significantly lower than Spiro-OMeTAD (>70 mg/ml), which could remarkably reduce the cost especially for large-area processing in future commercialization. This work presents a promising avenue for the versatile design of multifunctional HTMs, offering a blueprint for achieving efficient and stable PSCs.
|
|
| 10. |
- Weng, Taoyu, et al.
(author)
-
Enhancing the Operability of Photoexcitation-Controlled Aggregation-Induced Emissive Molecules in the Organic Phase
- 2021
-
In: The Journal of Physical Chemistry Letters. - : American Chemical Society. - 1948-7185. ; 12:26, s. 6182-6189
-
Journal article (peer-reviewed)abstract
- Controllable aggregation-induced emission luminogens (AIEgens) by photoexcitation can be conducted within a single solvent, thus opening new opportunities for preparing and processing smart materials. However, undesired side-reactions like photooxidation that can easily occur in the organic phase remain, limiting their applications. To enhance the operability of photoexcitation-controlled AIEgens (to specifically produce a phosphorescence characteristic) in the organic phase, in this work, we employ a typical prototype, hexathiobenzene, usually as the specific phosphorescent group, and investigate a series of physical and chemical factors, such as light intensity, dissolved oxygen content, and solvent polarity, to explore ways to control the photoexcitation-controllable AIEgens against the impurities from side-reactions. An organogel strategy was also developed to minimize interference factors and improve the practical application ability. We believe that the presented results provide new insights into the further development of the photoexcitation-based functional materials and the promotion of their practical usage.
|
|
