1. |
- Amann, Daniel, 1967-, et al.
(author)
-
Affordability aspects in the concept generation of defence systems
- 2017
-
In: Proceedings of 18th International CINet Conference. - Twente : Continuous Innovation Network. - 9789077360200 ; , s. 26-38
-
Conference paper (other academic/artistic)abstract
- Cost escalation for fighter aircraft is arguably not sustainable. Pushing frontiers oftechnology by incremental improvements of traditional platforms has led to anexponential increase in cost. This paper addresses the process of concept generationwith the purpose to explore how affordability is managed in that process, in order toidentify possible measures to improve the likelihood of generating affordableconcepts. This is done by studying two cases of concept generation of future combatair systems. The concepts generated in these two cases are however not curbing thecost escalation and are, with only one notable exception, based on incrementalinnovation. Nevertheless, the empirical observations offer leads to potentially fostera more innovative and cost conscious concept generation process, indicatingavenues for future research.
|
|
2. |
- Angenendt, Knut, 1982, et al.
(author)
-
Ionic liquid structures from large DFT calculations using mindless configurations
- 2010
-
In: Journal of Physical Chemistry C. - : American Chemical Society (ACS). - 1932-7447 .- 1932-7455. ; 114:48, s. 20577-20582
-
Journal article (peer-reviewed)abstract
- Three different popular imidazolium based ionic liquids (ILs); EMI-BF4, EMI-PF6, and EMI-TFSI, have been modeled by DFT calculations (B3LYP/6-311+G*) using large, up to 130 atom cluster models, for a better understanding of the structure and ion ion interactions in these ILs and ILs in general. Particular emphasis has been put on the role of appropriate starting structures and how the present large models differ from the ion-pair models of ILs generally used. The system size normalized ion ion interaction energies are shown to converge rapidly, and conformational equilibria and higher order properties like IR spectra are shown to be valuable as quality criteria. The explicit inclusion of an IL environment by the large cluster approach is also compared to using an implicit, continuum, strategy via SCRF C-PCM calculations.
|
|
3. |
- Bengtsson, Lars, 1963
(author)
-
Electrical Measurement Systems and Methods
- 2014
-
Book (other academic/artistic)abstract
- This book treats a wide range of aspects on electrical measurement systems and the methods used to acquire data from electronic systems. That includes sensors and sensor design, amplifiers such as differential and charge amplifiers, ADCs and DACs, digital oscilloscopes, cable theory and probes, noise and noise coupling, common and normal mode signals. This first part (chapters 1-8) doesn’t require any advanced mathematics and is aimed towards undergraduates. The second part (chapters 9-17) is on an advanced level (master level) and treats transform theory (Fourier, Laplace, z) and how to handle signals in frequency space. We cover the sampling theorem (Nyquist), resolution bandwidth, frequency spectrum distortions like aliasing and leakage and how to apply windows in a frequency spectrum. We also cover systems and signal processing in time-space, including convolution and correlation, filter theory and filter design (both analog and digital). The last chapters concern the statistical aspects on measurement systems and signals, like point and interval estimations, curve fitting and uncertainty estimations according to the GUM method.
|
|
4. |
|
|
5. |
- Capaci, Francesca, et al.
(author)
-
Simulating and Analyzing Experiments in the Tennessee Eastman Process Simulator
- 2015
-
In: ENBIS-15.
-
Conference paper (peer-reviewed)abstract
- In many of today’s continuous processes, the data collection is usually performed automatically yielding exorbitant amount of data on various quality characteristics and inputs to the system. Moreover, such data are usually collected at high frequency introducing significant serial dependence in time. This violates the independent data assumption of many industrial statistics methods used in process improvement studies. These studies often involve controlled experiments to unearth the causal relationships to be used for robustness and optimization purposes.However real production processes are not suitable for studying new experimental methodologies, partly because unknown disturbances/experimental settings may lead to erroneous conclusions. Moreover large scale experimentation in production processes is frowned upon due to consequent disturbances and production delays. Hence realistic simulation of such processes offers an excellent opportunity for experimentation and methodological development.One commonly used process simulator is the Tennessee Eastman (TE) challenge chemical process simulator (Downs & Vogel, 1993)[1]. The process produces two products from four reactants, containing 41 measured variables and 12 manipulated variables. In addition to the process description, the problem statement defines process constraints, 20 types of process disturbances, and six operating modes corresponding to different production rates and mass ratios in the product stream.The purpose of this paper is to illustrate the use of the TE process with an appropriate feedback control as a test-bed for the methodological developments of new experimental design and analysis techniques.The paper illustrates how two-level experimental designs can be used to identify how the input factors affect the outputs in a chemical process.Simulations using Matlab/Simulink software are used to study the impact of e.g. process disturbances, closed loop control and autocorrelated data on different experimental arrangements.The experiments are analysed using a time series analysis approach to identify input-output relationships in a process operating in closed-loop with multivariate responses. The dynamics of the process are explored and the necessary run lengths for stable effect estimates are discussed.
|
|
6. |
- Chen, Zhe, et al.
(author)
-
Nano-scale characterization of white layer in broached Inconel 718
- 2017
-
In: Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing. - Amsterdam : Elsevier BV. - 0921-5093 .- 1873-4936. ; 684, s. 373-384
-
Journal article (peer-reviewed)abstract
- The formation mechanism of white layers during broaching and their mechanical properties are not well investigated and understood to date. In the present study, multiple advanced characterization techniques with nano-scale resolution, including transmission electron microscopy (TEM), transmission Kikuchi diffraction (TKD), atom probe tomography (APT) as well as nano-indentation, have been used to systematically examine the microstructural evolution and corresponding mechanical properties of a surface white layer formed when broaching the nickel-based superalloy Inconel 718.TEM observations showed that the broached white layer consists of nano-sized grains, mostly in the range of 20–50 nm. The crystallographic texture detected by TKD further revealed that the refined microstructure is primarily caused by strong shear deformation. Co-located Al-rich and Nb-rich fine clusters have been identified by APT, which are most likely to be γ′ and γ′′ clusters in a form of co-precipitates, where the clusters showed elongated and aligned appearance associated with the severe shearing history. The microstructural characteristics and crystallography of the broached white layer suggest that it was essentially formed by adiabatic shear localization in which the dominant metallurgical process is rotational dynamic recrystallization based on mechanically-driven subgrain rotations. The grain refinement within the white layer led to an increase of the surface nano-hardness by 14% and a reduction in elastic modulus by nearly 10% compared to that of the bulk material. This is primarily due to the greatly increased volume fraction of grain boundaries, when the grain size was reduced down to the nanoscale.
|
|
7. |
- Cherednichenko, Serguei, 1970, et al.
(author)
-
Online Detection of H2O and CO in the Humid Raw Gas from the Gasifier Using Terahertz Spectroscopy
- 2013
-
In: ICPS, 13 International Conference on Polygeneration Strategies, Sept.5-13, Vienna, Austria. - 9783950275483 ; , s. 51-58
-
Conference paper (peer-reviewed)abstract
- The integration of a gasifier with a complex multistage synthesis process, such as SNG synthesis, demands a fast monitoring of the gasifier performance. However, despite the availability of standard analyzers for determination of dry gas composition, there are still many practical difficulties remaining in the online measurement of tar and steam in the raw gas. For the detection of steam concentration, electromagnetic waves at terahertz frequencies (102-104 GHz) are promising with regard to development of a robust online measurement device for industrial application. The main reason for the high potential is the low risk for interference with the wide range of other molecules and that the transmission of electromagnetic waves at THz frequencies is rather low sensitive to deposits and particulate matter in the course of the beam compared to the conventional and well established wavelengths like infrared. In the present work, a THz gas spectrometer was designed and constructed to check the feasibility of applying this measurement technique at industrial scale. For this purpose, continuous flows of raw gas with various water and CO contents from the Chalmers gasifier as well as a flue gas with known water content from the biomass combustor were introduced to the spectrometer set-up. H2O and CO compositions in each stream were determined in an online manner. The results confirmed the possibility of applying strong rotational water lines at 448 and 380 GHz to develop reliable devices for online measurement of water vapor with excellent error interval. However, some difficulties were encountered for simultaneous detection CO concentration with water within the frequency range studied in this work (300-500 GHz).
|
|
8. |
- Cherednichenko, Serguei, 1970, et al.
(author)
-
Terahertz Gas Spectrometer
- 2014
-
In: Swedish Microwave Days March 11-12, 2014, Gothenburg, Sweden.
-
Conference paper (peer-reviewed)abstract
- We present a 300-500GHz gas spectrometer built for and practically tested at the 2–4-MW indirect gasifier at the Chalmers Power Center. The primary goal is precise online measurements of H2O vapor and CO concentrations in the producer gas. Experimentally obtained H2O vapor concentration resolution was about 1% at the conditions of 50% VMR and 400 deg.C.
|
|
9. |
- Chernikova, Dina, 1982, et al.
(author)
-
Development of the Neutron-Gamma-Neutron (NGN) approach for the fresh and spent fuel assay
- 2012
-
In: Proceedings of The 53nd Annual Meeting of the Institute of Nuclear Materials Management.
-
Conference paper (other academic/artistic)abstract
- In connection with current safety and complexity limitations for installations which usekeV neutrons for irradiation in the fresh and spent fuel assay, in medicine, geophysicaland detection fields, there is a long felt need of effective, light, inexpensive systems withlonger lifetimes and the possibility to ”switch off” the source during transportation andwork break. The present paper discusses an opportunity of creating a novel technique basedon using a pulsed neutron generator, hydrogen moderator and beryllium, which will enablecreation of a compact and inexpensive facility capable to satisfy all requirements. The mainidea of the proposed method consists in using photonuclear reaction in beryllium due togamma irradiation originating from (n,gamma) reaction in a hydrogen containing moderator.After the neutron pulse of a modern compact DD neutron generator in hydrogen-containingmoderator, high-energy neutrons (approximately 2.5 MeV) get slowed down mainly by elasticscattering to near thermal energies. At thermal energies, the neutrons diffuse through thematerial until they undergo thermal capture (capture is dominated by hydrogen neutronabsorbers). When a hydrogen atom captures a thermal neutron, it turns into deuteriumwith the release of a large component of 2.23 MeV gamma-rays. Beryllium is one of thefew elements in nature that undergoes a photonuclear reaction with this gamma energyrange (e.g. deuterium has a low energy 2.225 MeV photonuclear threshold). Thus, as theberyllium has lower neutron-binding energy, 1.667 MeV (photonuclear reaction threshold),a photonuclear reaction will take place with emission of neutrons with energy defined by thekinematic equation. Thus, this method allows to obtain a high quality epithermal neutronbeam without using a complex system with particle accelerator or radioisotope sources withlimited decay time. The proposed method has been studied using Monte Carlo simulations,which made it possible to define the theoretical limits of the use of the NGN approach inindustrial applications. The paper will presents the results of these investigations.
|
|
10. |
- Chernikova, Dina, 1982, et al.
(author)
-
Testing a direct method for evaluating the concentration of boron in a fuel pool using scintillation detectors, and a 252Cf and an 241Am-Be source
- 2013
-
In: Proceeding of ESARDA meeting 2013.
-
Conference paper (peer-reviewed)abstract
- The present investigations are aimed at the development and testing of a direct non-destructive method for evaluating the concentration of boron in a fuel pool using scintillation detectors. The method uses a modified ratio between two gamma lines with energy of 480 keV and 2.23 MeV. These lines belong to the capture of a thermal neutron in boron and hydrogen, respectively. The relation between them can reveal the concentration of boron in the fuel pond.The method proposed was tested in a laboratory experiment with a 252Cf and an 241Am-Be source. EJ-309 liquid scintillation detectors were used for measurements of gamma spectra. The concentration of boron in water varied from 1550 ppm to 4200 ppm. The optimization and test studies were performed via MCNPX simulations.The results of these tests are provided in the present paper and they show that the boron content in water can be determined through using the characteristics of gamma lines with energy of 480 keV and 2.23 MeV.
|
|