1. |
- Akram, Asif, 1978, et al.
(author)
-
AEOLIX Living Labs Operational ImpactsAssessment
- 2019
-
Reports (other academic/artistic)abstract
- This document provides the AEOLIX impact assessment of living labs at the operational level. It is based on three main impacts namely business, environment, and socio-economic impacts. The three impacts are sub-divided further into sub-categories. The report collects data from twelve living labs involved in with AEOLIX. One of the main goals of AEOLIX was to reduce the costs for various logistics activities as implemented in twelve living labs. The expected benefits in the business area are from reducing the consumption of different resources, reducing the time used for various activities, and from increasing the productivity in certain areas. The economic or business benefits came along two dimensions: (i) in terms of time and (ii) in terms of money. In terms of time, AEOLIX facilitated reducing the time spent on various activities at the companies. In terms of money, AEOLIX helped to save the costs of specific logistics activities within the living lab. For the environmental aspect an overall value of 20% was set as target value for reduction in CO2 emission using AEOLIX. Only one of all living labs reached this target value, but there was anyhow a reduction found in all living labs. AEOLIX and its functions have also helped in reducing noise pollution at some of the living labs. In some cases, there was quite a considerable reduction. For the socio-economic aspects the job creation, SME empowerment, and the improved quality of life are addressed. This study has explored the impact of AEOLIX on job creation in terms of drivers’ and operators’ jobs. Since the AEOLIX implementation is still in its initial phases, respondents were unable to estimate how many jobs (drivers and/or operators) were created in the long run. SME Empowerment was measured as the increase in SMEs’ market share and the increase in direct collaboration between SMEs and large organizations. The results were meager both with regard to the market share and the extent of collaboration. The improved quality of life is measured in the way AEOLIX puts more focus on work, the less stress at work and a positive attitude towards people using it. The results reflect that AEOLIX has greatly helped employees to put more focus on work and to reduce stress levels. Managers consider this as a positive side of the return on investment (ROI) as the business processes are improved. AEOLIX impact on various socio-economic aspects is in principle positive but as this process is very slow to emerge it takes time to observe any changes in social aspects. Acceptance and trust on AEOLIX can be captured as a majority of the evaluation managers of the living labs found the AEOLIX functions (dashboard, connectivity engine and toolkit) useful to a great extent. The willingness to continue using AEOLIX functions and their usefulness are directly related to each other. This means that the more useful a function is, the more users are willing to continue using it. The AEOLIX platform, through various services and functions, has a positive impact on society in general and on workers in particular. Although this impact cannot be evaluated financially for the first year of the AEOLIX implementation, numerous studies show that a more satisfying and less stressful job, together with a more welcoming and stimulating environment, have an important economic impact in the long-term period. Therefore, the fact that AEOLIX has a positive impact on society will also prove to be an economic benefit for the different companies.
|
|
2. |
- André, Hampus, 1989
(author)
-
Resource and Environmental Impacts of Resource-Efficiency Measures Applied to Electronic Products
- 2018
-
Licentiate thesis (other academic/artistic)abstract
- Natural resources such as ecosystems, land, water and metals underpin the functioning of economies and human well-being, and are becoming increasingly scarce due to growth in population and affluence. Metals are increasingly demanded for their specific properties as modern technology develops. The dependence on metals is of growing concern due to the environmental impacts related, for example, to energy use and local impacts from mining, as well as the scarcity risks posed by socio-economic, geological and geopolitical constraints. Thus, there is a clear need to use metals and other natural resources more efficiently. The vision of a circular economy has been proposed as a way to do this, for example by improving durability, reusing, repairing and recycling. Such so-called resource-efficiency (RE) measures are commonly assumed to be environmentally beneficial, although the evidence is not plentiful. It is plausible that focusing on recirculating products and materials could shift burdens to other environmental impacts or life cycle stages. It has therefore been argued that a life cycle-based approach, such as in life cycle assessment (LCA), is useful to critically assess the environmental implications of RE measures. LCA aims to quantify the environmental impacts of products over their entire life cycles - from cradle to grave - assessing a wide range of impacts such as toxicity, climate change and metal resource use. For metal resource use, however, there are a number of perspectives as to what constitutes the actual environmental problem. These perspectives are represented in a variety of life cycle impact assessment methods (LCIA) which have previously been shown to give diverging results. Electronic products are emblematic of metal resource use challenges since they deploy a broad spectrum of scarce metals. This thesis aims to provide knowledge on the potential for RE measures to reduce the environmental impacts of electronic products, by addressing the following research questions: (1) What resource-efficiency measures result in reduced potential environmental impacts and resource use – for what types of products and under what conditions? (2) How does extended use of electronic products through design for increased technical lifetime, reuse and repair affect environmental impacts, particularly metal resource use? (3) How does the application of different LCIA methods for metal resource use influence interpretations of resource-efficiency measures applied to electronic products? This thesis builds on three appended papers which are all based on comparative assessments of resource efficiency, studied as resource use and environmental impacts per function delivered, using LCA and material flow analysis. The results indicate that extended use of electronic products through increasing technical lifetimes, reusing and repairing, is generally resource-efficient. Exceptions may occur, however, if extended use is insufficient to motivate impacts from producing more durable products or spare parts. Use extension of electronic products leads to resource efficiency in two distinct ways: through the intended use extension and by increasingly steering material flows into recycling. Further resource efficiency could be realised by combining RE measures over the entire life cycles of products. With regards to metal resource use, the choice of LCIA method can influence the interpretation of the results of RE measures for electronic products. Therefore, it is advisable to use several complementary LCIA methods to minimise the risks of overlooking potentially important resources issues. Furthermore, better understanding and transparency of such issues is valuable in order to provide more comprehensive information to decision-makers.
|
|
3. |
- Johansson, Viktor, 1991, et al.
(author)
-
Value of wind power – Implications from specific power
- 2017
-
In: Energy. - : Elsevier BV. - 0360-5442 .- 1873-6785. ; 126, s. 352-360
-
Journal article (peer-reviewed)abstract
- This paper investigates the marginal system value of increasing the penetration level of wind power, and how this value is dependent upon the specific power (the ratio of the rated power to the swept area). The marginal system value measures the economic value of increasing the wind power capacity. Green-field power system scenarios, with minimised dispatch and investment costs, are modelled for Year 2050 for four regions in Europe that have different conditions for renewable electricity generation. The results show a high marginal system value of wind turbines at low penetration levels in all four regions and for the three specific powers investigated. The cost-optimal wind power penetration levels are up to 40% in low-wind-speed regions, and up to 80% in high-wind–speed regions. The results also show that both favourable solar conditions and access to hydropower benefit the marginal system value of wind turbines. Furthermore, the profile value, which measures how valuable a wind turbine generation profile is to the electricity system, increases in line with a reduction in the specific power for wind power penetration levels of >10%. The profile value shows that the specific power becomes more important as the wind power penetration level increases. © 2017 Elsevier Ltd
|
|
4. |
- Pizarro, Amalia, et al.
(author)
-
What is the future potential for imports of combustible municipal waste to countries with extensive district heating networks? A case study of Denmark
- 2015
-
In: Proceedings of Sardinia 2015 Fifteenth International Waste Management and Landfill Symposium. ; 9788862650212
-
Conference paper (peer-reviewed)abstract
- In Europe, landfilling is the most widely used method for managing municipal solid waste. By contrast, the northern European waste market is characterized by high capacities from energy recovery plants, mostly incineration in cogeneration facilities. In Denmark, there is an overcapacity of incineration plants and this study aims to analyse if import of waste is beneficial during an interim period to divert landfilling or if it might be profitable to invest in overcapacity in the long-term in those countries where heat from incineration can be recovered. The energy and waste management system are described through linking of mathematical models, taking a holistic approach. In the short-term it pays off to import waste, avoiding landfilling; however, in the longer-term, benefits from waste trading will depend on the price of heat markets.
|
|
5. |
- Sotnikov, Artem, 1985, et al.
(author)
-
Simulations of a solar-assisted block-heating system
- 2017
-
In: ISES Solar World Congress 2017 - IEA SHC International Conference on Solar Heating and Cooling for Buildings and Industry 2017, Proceedings. - Freiburg, Germany : International Solar Energy Society.
-
Conference paper (peer-reviewed)abstract
- Two types of simulation software TRNSYS and Polysun are studied to check their suitability for solar district heating system planning. A reference case, a part of the Vallda Heberg district heating system is modelled in both tools and results are compared with available measured data and with each other. Models are successfully calibrated. TRNSYS and Polysun models have deviations in main key figures compared to the reference case less than 2% and less than 8% respectively. A sensitivity analysis of key parameters shows that the two tools give similar results.
|
|
6. |
- Adl-Zarrabi, Bijan, 1959, et al.
(author)
-
Sustainability Assessment of Infrastructure Elements with Integrated Energy Harvesting Technologies
- 2016
-
In: Energy and Environment. - : Wiley. - 9781119307761 ; , s. 221-234
-
Book chapter (other academic/artistic)abstract
- The possibility of integrating energy harvesting devices into the bridge/tunnel structures along Coastal Highway Route E39 has been investigated in a feasibility study by the Norwegian Public Roads Administration (NPRA). The main advantage of integrating energy conversion devices in a structural element is the reduction of costs compared to stand-alone devices. The construction could be used as a foundation, a mooring point and provide a dry environment for electrical devices. Easy access to the production site could also reduce the cost for installation, operation and maintenance. Two important challenges related to harvesting renewable energy by infrastructure elements, without concerning about the energy source, are to store it or feed the energy to the grid. In the second case, tailoring generation to demand is of critical importance. Tasks such as supply and demand management, for instance, peak hour management, what kind of storage should be used - electrical or thermal - need be solved. Furthermore, integrating energy production devices in a structure might cause negative environmental impacts and affect the life expectancy and maintenance costs of such structures. The potential environmental impacts associated with renewable technologies are the consequences for bird life or marine fauna at the fjord crossing locations, as well as noise and visual impact. Thus, a sustainability assessment should be performed in order to quantify the ecological, economical and societal impacts of the suggested alternatives.
|
|
7. |
- Ahlgren, Serina, et al.
(author)
-
Review of methodological choices in LCA of biorefinery systems - key issues and recommendations
- 2015
-
In: Biofuels, Bioproducts and Biorefining. - : Wiley. - 1932-1031 .- 1932-104X. ; 9:5, s. 606-619
-
Research review (peer-reviewed)abstract
- The current trend in biomass conversion technologies is toward more efficient utilization of biomass feedstock in multiproduct biorefineries. Many life-cycle assessment (LCA) studies of biorefinery systems have been performed but differ in how they use the LCA methodology. Based on a review of existing LCA standards and guidelines, this paper provides recommendations on how to handle key methodological issues when performing LCA studies of biorefinery systems. Six key issues were identified: (i) goal definition, (ii) functional unit, (iii) allocation of biorefinery outputs, (iv) allocation of biomass feedstock, (v) land use, and (vi) biogenic carbon and timing of emissions. Many of the standards and guidelines reviewed here provide only general methodological recommendations. Some make more specific methodological recommendations, but these often differ between standards. In this paper we present some clarifications (e.g. examples of research questions and suitable functional units) and methodological recommendations (e.g. on allocation).
|
|
8. |
- Baldi, Francesco, et al.
(author)
-
The cost of innovative and sustainable future ship energy systems
- 2019
-
In: ECOS 2019 - Proceedings of the 32nd International Conference on Efficiency, Cost, Optimization, Simulation and Environmental Impact of Energy Systems. ; , s. 239-250
-
Conference paper (peer-reviewed)abstract
- The latest guidelines approved by the environmental protection committee of the international maritime organization (IMO) will require the shipping sector to reduce its greenhouse gas (GHG) emissions by 50% before 2050 and achieve a complete decarbonization by the end of the century. This will require a major change in the way ships are built and operated today. In this paper, we aim at understanding what types of ship energy systems and fuels will be preferable and what will be the costs to achieve the environmental goals set by IMO for shipping. To do this, we approach the question as an MILP problem, with increasingly stringent constraints on the total GHG emissions and with the objective of minimizing the total cost of ownership. We apply this analysis to three ship types (a containership, a tanker, and a passenger ferry) and we determine what type of choice for the ship’s energy systems will be the most optimal, for each ship type. The results show that the most cost-effective pathway towards the elimination of GHG emissions is composed of a first phase with LNG as fuel and with an increasing use of carbon capture and storage, while the full decarbonisation of the shipping sector will require switching to hydrogen as fuel. These results depend only marginally on the type of ship investigated and on the type of regulation enforced. While the costs required to achieve up to 75% GHG emission reduction are relatively similar to the baseline case (50-70% higher), moving towards a full decarbonisation will require a cost increase ranging between 280% and 340% higher than the business as usual.
|
|
9. |
- Böckin, Daniel, 1989
(author)
-
Learning from assessments of resource efficiency measures and their impact on resource use and the environment - Based on a case of additive manufacturing and a review of assessment studies
- 2018
-
Licentiate thesis (other academic/artistic)abstract
- Resource efficiency measures have the potential to reduce the environmental and resource impacts of the current linear economy by decreasing the physical flows of material and energy associated with producing and using products and services. In order to investigate this potential, there is a need for assessments from a systems perspective, which for example enables the identification of possible trade-offs between different measures and aspects of resource efficiency depending on the product characteristics. The research was carried out in two parts, firstly by synthesising the learnings from a large number of assessment studies. The analysis was built on typologies formulated for mapping resource efficiency measures and product characteristics to the environmental and resource outcomes of the measures in each case. This resulted in a number of findings detailing under which conditions that resource efficiency measures yield environmental and resource benefits, as well as when there are possible trade-offs and limitations. Furthermore, some product characteristics were identified that are key in determining when resource efficiency measures are effective, namely whether products are durable, consumable, complex or whether they have significant impacts from extraction and material production or from their use. Products with significant impacts from the use-phase are called active products and give rise to trade-offs that are discussed in detail, specifically regarding under which conditions there are environmental and resource benefits from extended use or from reducing use-phase impacts. The second part of the research was a life cycle assessment of one such active product, namely 3D-printed truck engines. The aim was to investigate the resource efficiency potential of this emerging technology. Results showed that 3D-printing could lead to net improvements in life cycle impacts, by allowing redesigns of components for lower weight and thus lower fuel consumption. However, the conclusions were only valid under certain conditions, such ascareful material choice and a low-fossil electricity mix for the printing process, without which 3D-printing resulted in environmental deterioration compared to conventional manufacturing. Some results could be generalised to other applications and industries, for example the importance of a low-fossil electricity mix for 3D-printing, which is valid for any application of 3D-printing. In conclusion, useful knowledge on resource efficiency measures was produced both by synthesising many assessment studies and carrying out a single assessment study, especially on the topics of active products and additive manufacturing.
|
|
10. |
- D'Angelo, Sebastiano C., et al.
(author)
-
Techno-Economic Analysis of a Glycerol Biorefinery
- 2018
-
In: ACS Sustainable Chemistry & Engineering. - : American Chemical Society (ACS). - 2168-0485. ; 6:12, s. 16563-16572
-
Journal article (peer-reviewed)abstract
- Biodiesel is an environmentally friendly alternative to fossil fuels, which is experiencing a steep growth in market size. Because the most common biodiesel production technology is based on the transesterification of triglycerides, a burgeoning amount of glycerol byproduct is obtained. In order to address this economic and ecologic drawback, several chemocatalytic technologies have been developed to exploit this compound to feed the market with added-value products. Lactic acid, acrylic acid, allyl alcohol, propanediols, and glycerol carbonate have emerged as the most relevant candidates for this purpose. In previous studies, an environmental and economic assessment of a glycerol biorefinery built on these valorization pathways has been performed, taking into account only the operating costs in relation to the economic aspects. This study evaluates for the first time the investment required by these glycerol valorization processes, based on the Guthrie, Taylor, and Aspen capital cost estimation methods, and then assesses the potential of a heat-integrated glycerol biorefinery. Glycerol carbonate stands out as the dominant product to maximize the profitability with respect to the glycerol utilized, while 1,2-propanediol and allyl alcohol are determined as target compounds to be included in the glycerol biorefinery product mix if further reductions of the environmental impact are sought after. This early stage techno-economic analysis provides a sounder basis toward the practical realization of an integrated facility sustainably upgrading waste streams from the processing of renewables into commodities, thus promoting the concept of circular economy.
|
|