| 11. |
- Duarte, H., et al.
(author)
-
Ultrasound-Assisted Extraction of Polyphenols from Maritime Pine Residues with Deep Eutectic Solvents
- 2022
-
In: Foods. - : MDPI AG. - 2304-8158. ; 11:23
-
Journal article (peer-reviewed)abstract
- Deep eutectic solvents represent an important alternative in the field of green solvents due to their low volatility, non-toxicity, and low synthesis cost. In the present investigation, we propose the production of enriched polyphenolic extracts from maritime pine forest residues via an ultrasound-assisted approach. A Box–Behnken experimental design with a response surface methodology was used with six variables to be optimized: solid-to-solvent ratio, water percentage, temperature and time of extraction, amplitude, and catalyst concentration. The mixture of levulinic and formic acids achieved the highest extraction yield of polyphenols from pine needle and bark biomass. In addition, the solid-to-solvent ratio was found to be the only influential variable in the extraction (p-value: 0.0000). The optimal conditions were established as: 0.1 g of sample in 10 mL of LA:FA (70:30%, v/v) with 0% water and 0 M H2SO4 heated to 30 °C and extracted during 40 min with an ultrasound amplitude of 80% at 37 kHz. The bioactive properties of polyphenol-enriched extracts have been proven with significant antioxidant (45.90 ± 2.10 and 66.96 ± 2.75 mg Trolox equivalents/g dw) and antimicrobial activities. The possibility to recycle and reuse the solvent was also demonstrated; levulinic acid was successfully recovered from the extracts and reused in novel extractions on pine residues. This research shows an important alternative to obtaining polyphenol-enriched extracts from forest residues that are commonly discarded without any clear application, thus opening an important window toward the valorization of such residues.
|
|
| 12. |
- Duarte, T. A. G., et al.
(author)
-
A Glance at Novel Ionanofluids Incorporating Silk-Derived Carbon Dots
- 2024
-
In: Chemistry of Materials. - : American Chemical Society (ACS). - 0897-4756 .- 1520-5002. ; 36:3, s. 1136-1152
-
Journal article (peer-reviewed)abstract
- One of the hallmarks of the current efforts in the field of thermal energy is heat transfer enhancement. Ionanofluids (INFs), a combination of nanomaterials and ionic liquids (ILs), are an appealing category of thermal fluids. In this work, we introduce sustainable INFs composed of carbon dots derived from Bombyx mori silk fibroin (SF) dispersed in a mixture of 1-butyl-3-methylimidazolium chloride (IL1) and 1-(4-sulfobutyl)-3-methylimidazolium triflate (IL2). The syntheses were performed at mild conditions, with reaction times of 3, 4, and 5 h, and without purification steps. The INFs display room-temperature emission in the visible spectral range with quantum yield values up to 0.09 and are essentially viscous fluids (G″ > G′). A marked shear thinning behavior is observed at high shear rates, particularly for the systems SFIL1IL2-3h and SFIL1IL2-4h. The INFs demonstrate relatively high heat capacity and thermal conductivity values in comparison to state-of-the-art INFs. Under suitable illumination conditions, the INFs can convert light into heat in an efficient manner, with photothermal conversion efficiencies of up to 28%, similar to other reported INFs. SFIL1IL2-5h exhibits remarkable stability over time within the range of working temperatures. This work paves the way for the development of new thermal fluids for enhanced heat transfer technologies using sustainable synthesis routes and natural raw precursor materials.
|
|
| 13. |
- Eivazi, Alireza, et al.
(author)
-
On the development of all-cellulose capsules by vesicle-templated layer-by-layer assembly
- 2021
-
In: Polymers. - : MDPI AG. - 2073-4360. ; 13:4
-
Journal article (peer-reviewed)abstract
- Polymeric multilayer capsules formed by the layer-by-layer (LbL) technique are interesting candidates for the purposes of storage, encapsulation, and release of drugs and biomolecules for pharmaceutical and biomedical applications. In the current study, cellulose-based core-shell particles were developed via the LbL technique alternating two cellulose derivatives, anionic carboxymethyl-cellulose (CMC), and cationic quaternized hydroxyethylcellulose ethoxylate (QHECE), onto a cationic vesicular template made of didodecyldimethylammonium bromide (DDAB). The obtained capsules were characterized by dynamic light scattering (DLS), ζ potential measurements, and high-resolution scanning electron microscopy (HR-SEM). DLS measurements reveal that the size of the particles can be tuned from a hundred nanometers with a low polydispersity index (deposition of 2 layers) up to micrometer scale (deposition of 6 layers). Upon the deposition of each cellulose derivative, the particle charge is reversed, and pH is observed to considerably affect the process thus demonstrating the electrostatic driving force for LbL deposition. The HR-SEM characterization suggests that the shape of the core-shell particles formed is reminiscent of the spherical vesicle template. The development of biobased nano-and micro-containers by the alternating deposition of oppositely charged cellulose derivatives onto a vesicle template offers several advantages, such as simplicity, reproducibility, biocompatibility, low-cost, mild reaction conditions, and high controllability over particle size and composition of the shell.
|
|
| 14. |
- Fernandes, C., et al.
(author)
-
New deep eutectic solvent assisted extraction of highly pure lignin from maritime pine sawdust (Pinus pinaster Ait.)
- 2021
-
In: International Journal of Biological Macromolecules. - : Elsevier BV. - 0141-8130 .- 1879-0003. ; 177, s. 294-305
-
Journal article (peer-reviewed)abstract
- Lignocellulosic biomass is a renewable and sustainable feedstock, mainly composed of cellulose, hemicellulose, and lignin. Lignin, as the most abundant natural aromatic polymer occurring on Earth, has great potential to produce value-added products. However, the isolation of highly pure lignin from biomass requires the use of efficient methods during lignocellulose fractionation. Therefore, in this work, novel acidic deep eutectic solvents (DESs) were prepared, characterized and screened for lignin extraction from maritime pine wood (Pinus pinaster Ait.) sawdust. The use of cosolvents and the development of new DES were also evaluated regarding their extraction and selectivity performance. The results show that an 1 h extraction process at 175 °C, using a novel DES composed of lactic acid, tartaric acid and choline chloride, named Lact:Tart:ChCl, in a molar ratio of 4:1:1, allows the recovery of 95 wt% of the total lignin present in pine biomass with a purity of 89 wt%. Such superior extraction of lignin with remarkable purity using a “green” solvent system makes this process highly appealing for future large-scale applications.
|
|
| 15. |
- Fernandes, C., et al.
(author)
-
On Hair Care Physicochemistry : From Structure and Degradation to Novel Biobased Conditioning Agents
- 2023
-
In: Polymers. - : MDPI AG. - 2073-4360. ; 15:3
-
Research review (peer-reviewed)abstract
- Hair is constantly exposed to various adverse external stimuli, such as mechanical or thermal factors, that may cause damage or cause it to lose its shine and smooth appearance. These undesirable effects can be minimized by using hair conditioners, which repair the hair and restore the smooth effect desired by the consumer. Some of the currently used conditioning agents present low biodegradability and high toxicity to aquatic organisms. Consumers are also becoming more aware of environmental issues and shifting their preferences toward natural-based products. Therefore, developing novel, sustainable, natural-based derivatives that can act as conditioning agents in hair care products and thus compete with the traditional systems obtained from non-renewable sources is highly appealing. This paper presents the key physicochemical aspects of the hair conditioning process, including hair structure and degradation, and reviews some of the new alternative conditioning agents obtained from natural resources.
|
|
| 16. |
- From, Malin, et al.
(author)
-
Tuning the properties of regenerated cellulose : Effects of polarity and water solubility of the coagulation medium
- 2020
-
In: Carbohydrate Polymers. - : Elsevier Ltd. - 0144-8617 .- 1879-1344. ; 236
-
Journal article (peer-reviewed)abstract
- In this study, the effect of different alcohols and esters as a coagulation medium in the regeneration of cellulose dissolved in an aqueous LiOH-urea-based solvent was thoroughly investigated using various methods such as solid state NMR, X-ray diffraction, water contact angle, oxygen gas permeability, mechanical testing, and scanning electron microscopy. It was observed that several material properties of the regenerated cellulose films follow trends that correlate to the degree of cellulose II crystallinity, which is determined to be set by the miscibility of the coagulant medium (nonsolvent) and the aqueous alkali cellulose solvent rather than the nonsolvents’ polarity. This article provides an insight, thus creating a possibility to carefully tune and control the cellulose material properties when tailor-made for different applications.
|
|
| 17. |
- Lindman, Björn, et al.
(author)
-
Hydrophobic interactions control the self-assembly of DNA and cellulose
- 2021
-
In: Quarterly reviews of biophysics (Print). - 0033-5835 .- 1469-8994. ; 54
-
Journal article (peer-reviewed)abstract
- Desoxyribosenucleic acid, DNA, and cellulose molecules self-assemble in aqueous systems. This aggregation is the basis of the important functions of these biological macromolecules. Both DNA and cellulose have significant polar and nonpolar parts and there is a delicate balance between hydrophilic and hydrophobic interactions. The hydrophilic interactions related to net charges have been thoroughly studied and are well understood. On the other hand, the detailed roles of hydrogen bonding and hydrophobic interactions have remained controversial. It is found that the contributions of hydrophobic interactions in driving important processes, like the double-helix formation of DNA and the aqueous dissolution of cellulose, are dominating whereas the net contribution from hydrogen bonding is small. In reviewing the roles of different interactions for DNA and cellulose it is useful to compare with the self-assembly features of surfactants, the simplest case of amphiphilic molecules. Pertinent information on the amphiphilic character of cellulose and DNA can be obtained from the association with surfactants, as well as on modifying the hydrophobic interactions by additives.
|
|
| 18. |
- Lopes, Mariana, et al.
(author)
-
Legume beverages from chickpea and lupin, as new milk alternatives
- 2020
-
In: Foods. - : MDPI AG. - 2304-8158. ; 9:10
-
Journal article (peer-reviewed)abstract
- Recently, milk consumption has been declining and there is a high demand for non-dairy beverages. However, market offers are mainly cereal and nut-based beverages, which are essentially poor in protein (typically, less than 1.5% against the 3.5% in milk) and are not true milk replacers in that sense. In this work, new beverages from different pulses (i.e., pea, chickpea and lupin) were developed using technologies that enable the incorporation of a high level of seed components, with low or no discharge of by-products. Different processing steps were sequentially tested and discussed for the optimization of the sensorial features and stability of the beverage, considering the current commercial non-dairy beverages trends. The lupin beverage protein contents ranged from 1.8% to 2.4% (w/v) and the chickpea beverage varied between 1.0% and 1.5% (w/v). The “milk” yield obtained for the optimized procedure B was 1221 g/100 g of dry seed and 1247 g/100 g of dry seed, for chickpea beverage and lupin beverage, respectively. Sensory results show that chickpea beverage with cooking water has the best taste. All pulses-based beverages are typical non-Newtonian fluids, similarly to current non-dairy alternative beverages. In this respect, the sprouted chickpea beverage, without the cooking water, presents the most pronounced shear-thinning behavior of all formulations.
|
|
| 19. |
- Magalhaes, Solange, et al.
(author)
-
Acacia Wood Fractionation Using Deep Eutectic Solvents : Extraction, Recovery, and Characterization of the Different Fractions
- 2022
-
In: ACS Omega. - : American Chemical Society (ACS). - 2470-1343. ; 7:30, s. 26005-26014
-
Journal article (peer-reviewed)abstract
- The selective extraction and recovery of different lignocellulosic molecules of interest from forestry residues is increasing every day not only to satisfy the needs of driving a society toward more sustainable approaches and materials (rethinking waste as a valuable resource) but also because lignocellulosic molecules have several applications. For this purpose, the development of new sustainable and ecologically benign extraction approaches has grown significantly. Deep eutectic solvents (DESs) appear as a promising alternative for the processing and manipulation of biomass. In the present study, a DES formed using choline chloride and levulinic acid (ChCl:LA) was studied to fractionate lignocellulosic residues of acacia wood (Acacia dealbata Link), an invasive species in Portugal. Different parameters, such as temperature and extraction time, were optimized to enhance the yield and purity of recovered cellulose and lignin fractions. DESs containing LA were found to be promising solvent systems, as the hydrogen bond donor was considered relevant in relation to lignin extraction and cellulose concentration. On the other hand, the increase in temperature and extraction time increases the amount of extracted material from biomass but affects the purity of lignin. The most promising DES system, ChCELA in a ratio of 1:3, was found to not significantly depolymerize the extracted lignin, which presented a similar molecular weight to a la-aft lignin. Additionally, the P-31 NMR results revealed that the extracted lignin has a high content of phenolic OH groups, which favor its reactivity. A mixture of ChCl:LA may be considered a fully renewable solvent, and the formed DES presents good potential to fractionate wood residues.
|
|
| 20. |
- Magalhães, S., et al.
(author)
-
Eco-Friendly Methods for Extraction and Modification of Cellulose : An Overview
- 2023
-
In: Polymers. - : MDPI. - 2073-4360. ; 15:14
-
Research review (peer-reviewed)abstract
- Cellulose is the most abundant renewable polymer on Earth and can be obtained from several different sources, such as trees, grass, or biomass residues. However, one of the issues is that not all the fractionation processes are eco-friendly and are essentially based on cooking the lignocellulose feedstock in a harsh chemical mixture, such as NaOH + Na2S, and water, to break loose fibers. In the last few years, new sustainable fractionation processes have been developed that enable the obtaining of cellulose fibers in a more eco-friendly way. As a raw material, cellulose’s use is widely known and established in many areas. Additionally, its products/derivatives are recognized to have a far better environmental impact than fossil-based materials. Examples are textiles and packaging, where forest-based fibers may contribute to renewable and biodegradable substitutes for common synthetic materials and plastics. In this review, some of the main structural characteristics and properties of cellulose, recent green extraction methods/strategies, chemical modification, and applications of cellulose derivatives are discussed.
|
|
