| 41. |
|
|
| 42. |
-
99 years of the housing question in Sweden
- 2017
-
Editorial collection (peer-reviewed)abstract
- This book presents the history of modern architecture in Swedish housing. It is essential reading, especially at a time when a lack of accommodation is having such a brutal impact on Swedish society. However, this has not always been the case. Decisive public policies implemented during the 20th century led to an exemplary democratisation process of housing, unparalleled in terms of equality and inclusiveness. The first part of the book presents an overview of housing responses in Sweden. It dissects the housing question, describing it as a multidimensional phenomenon that cannot be addressed without considering social, political and economic circumstances. The second part compiles texts and materials from the exhibition Bo. Nu. Då: Bostadsfrågor och svar under 99 år (Housing. Now. Then: 99 Years of Housing Issues and Responses) held at ArkDes in 2016 and curated by Dan Hallemar. Based on the rich ArkDes collections, the book features examples of architectural solutions to the housing question from 1917 to the present. 99 Years of the Housing Question in Sweden brings together different perspectives, contributions, accounts and critiques from specialists and citizens alike, each illustrating in its own way how modern Swedish housing and society have developed and evolved hand in hand. The result is an important but relatively unknown discourse on the role of housing in the construction of the welfare state which offers vital lessons for today’s world.
|
|
| 43. |
- A., Adare, et al.
(author)
-
Transverse energy production and charged-particle multiplicity at midrapidity in various systems from sNN =7.7 to 200 GeV
- 2016
-
In: Physical Review C. - 2469-9985. ; 93:2
-
Journal article (peer-reviewed)abstract
- Measurements of midrapidity charged-particle multiplicity distributions, dNch/dη, and midrapidity transverse-energy distributions, dET/dη, are presented for a variety of collision systems and energies. Included are distributions for Au+Au collisions at sNN=200, 130, 62.4, 39, 27, 19.6, 14.5, and 7.7 GeV, Cu+Cu collisions at sNN=200 and 62.4 GeV, Cu+Au collisions at sNN=200 GeV, U+U collisions at sNN=193 GeV, d+Au collisions at sNN=200 GeV, He3+Au collisions at sNN=200 GeV, and p+p collisions at sNN=200 GeV. Centrality-dependent distributions at midrapidity are presented in terms of the number of nucleon participants, Npart, and the number of constituent quark participants, Nqp. For all A+A collisions down to sNN=7.7 GeV, it is observed that the midrapidity data are better described by scaling with Nqp than scaling with Npart. Also presented are estimates of the Bjorken energy density, BJ, and the ratio of dET/dη to dNch/dη, the latter of which is seen to be constant as a function of centrality for all systems.
|
|
| 44. |
|
|
| 45. |
- A. Almaqtari, Faozi, et al.
(author)
-
Earning management estimation and prediction using machine learning: A systematic review of processing methods and synthesis for future research
- 2022
-
In: 2021 International Conference on Technological Advancements and Innovations (ICTAI). - : IEEE.
-
Conference paper (peer-reviewed)abstract
- The present study highlights earning management optimization possibilities to constrain the events of earning management and financial fraud. Our study investigates the existing stock of knowledge and strand literature available on earning management and fraud detection. It aims to review systematically the methods and techniques used by prior research to determine earning management and fraud detection. The results indicate that prior research in earning management optimization is diverged among several techniques and none of these techniques has provided an ideal optimization for earning management. Further, the results reveal that earning management determinants are complex based on the type and size of business entities which complicate the optimization possibilities. The current research brings useful insights for predicting and optimization of earnings management and financial fraud. The present study has significant implications for policymakers, stock markets, auditors, investors, analysts, and professionals.
|
|
| 46. |
- A Asif, Farazee M, 1980-, et al.
(author)
-
Performance analysis of the closed loop supply chain
- 2012
-
In: Journal of Remanufacturing. - Germany : Springer Science and Business Media LLC. - 2210-4690. ; 2:4
-
Journal article (peer-reviewed)abstract
- PurposeThe question of resource scarcity and emerging pressure of environmental legislations has brought a new challenge for the manufacturing industry. On the one hand, there is a huge population that demands a large quantity of commodities; on the other hand, these demands have to be met by minimum resources and pollution. Resource conservative manufacturing (ResCoM) is a proposed holistic concept to manage these challenges. The successful implementation of this concept requires cross functional collaboration among relevant fields, and among them, closed loop supply chain is an essential domain. The paper aims to highlight some misconceptions concerning the closed loop supply chain, to discuss different challenges, and in addition, to show how the proposed concept deals with those challenges through analysis of key performance indicators (KPI).MethodsThe work presented in this paper is mainly based on the literature review. The analysis of performance of the closed loop supply chain is done using system dynamics, and the Stella software has been used to do the simulation. Findings The results of the simulation depict that in ResCoM; the performance of the closed loop supply chain is much enhanced in terms of supply, demand, and other uncertainties involved. The results may particularly be interesting for industries involved in remanufacturing, researchers in the field of closed loop supply chain, and other relevant areas. Originality The paper presented a novel research concept called ResCoM which is supported by system dynamics models of the closed loop supply chain to demonstrate the behavior of KPI in the closed loop supply chain.
|
|
| 47. |
- A Atlasov, Kirill, et al.
(author)
-
1D photonic band formation and photon localization in finite-size photonic-crystal waveguides
- 2010
-
In: OPTICS EXPRESS. - 1094-4087. ; 18:1, s. 117-122
-
Journal article (peer-reviewed)abstract
- A transition from discrete optical modes to 1D photonic bands is experimentally observed and numerically studied in planar photonic-crystal (PhC) L-N microcavities of length N. For increasing N the confined modes progressively acquire a well-defined momentum, eventually reconstructing the band dispersion of the corresponding waveguide. Furthermore, photon localization due to disorder is observed experimentally in the membrane PhCs using spatially resolved photoluminescence spectroscopy. Implications on single-photon sources and transfer lines based on quasi-1D PhC structures are discussed.
|
|
| 48. |
- A. B. Marçal, L., et al.
(author)
-
Spatially resolved structural and chemical properties of the white layer in machined Inconel 718 super alloy
- 2024
-
In: Materials and Design. - 0264-1275. ; 239
-
Journal article (peer-reviewed)abstract
- Inconel 718 is one type of nickel-based alloy used for a large range of applications, including gas turbines and aeroengines components. Although mechanical and thermodynamic properties of this material have been deeply studied in the past years, a method able to investigate local properties of the thin white layer formed on the alloy surface after machining remains challenging. Here, a 90 nm X-ray beam is used to probe the local strain, crystal orientation, and chemical composition of grains in the white layer. Data reveals mosaicity induced by the tool during machining. The high spatial resolution, combined with crystal lattice sensitivity, shows that the average grain size is around 30 nm throughout the white layer, while the strain is anisotropic nearest to the surface. Results provide new insights on the basic properties of the white layer in super alloys, revealing important information about the impact of finish machining which might help to explain fatigue and cracking formation on these materials during their usage phase.
|
|
| 49. |
|
|
| 50. |
- A. Bateki, Christian, et al.
(author)
-
Of milk and mobiles: Assessing the potential of cellphone applications to reduce cattle milk yield gaps in Africa using a case study
- 2021
-
In: Computers and Electronics in Agriculture. - : Elsevier BV. - 0168-1699. ; 191
-
Journal article (peer-reviewed)abstract
- There are growing expectations that Information and Communication Technology (ICT) applications could help improve on-farm yields amongst smallholder farmers in developing countries, and consequently, food and nutrition security. However, few studies have quantified the actual contribution of ICT applications on farmers’ yields, and these studies predominantly focused on crop production. We assessed the potential of ICT applications to close milk yield gaps among small- and medium scale dairy cattle farmers in Africa. First, we developed a theoretical framework summarizing biophysical and socio-economic constraints that foster milk yield gaps and discussed which constraints can be addressed using ICT applications. Second, using a case study of a feeding advice application for dairy cattle pre-tested with farmers in rural Kenya, we analyzed how much stand-alone the application could contribute to close dairy cattle milk yield gaps. Our findings suggest that ICT applications could help address some existing biophysical and socio-economic constraints fostering milk yield gaps, including data collection for breeding programs, feeding management advice, and facilitating access to markets and capital. Our stand-alone ICT application closed yield gaps by 2 % to 6 % on representative farms. Several factors may explain the limited actual contribution of selected ICT applications to reduce existing milk yield gaps, including the quality of the input data and models used in ICT applications, and more structural constraints that cannot be addressed by digital tools. Therefore, although ICT applications could help address constraints to achieving higher milk yields on dairy farms, a significant contribution to improve yields may only be achieved when conditions surrounding their use are adequate.
|
|
