| 51. |
- Ahonen-Jonnarth, Ulla, et al.
(author)
-
Multi-criteria reasoning models for value aggregation in wind power permit application assessment
- 2023
-
In: Renewable Energy Focus. - : Elsevier. - 1755-0084. ; 45, s. 210-219
-
Journal article (peer-reviewed)abstract
- Assessment of an application for wind power establishment is a multi-criteria problem including the coreproblem: whether to grant permission or not. In Sweden, County Administrative Boards decide the outcomes of these kinds of applications. Five permit officers were interviewed to investigate the difficultiesand the type of value aggregation in this work, and to test reasoning models as possible decision supporttools. The commonly used type of aggregation was condition-based aggregation. Aggregation based onvalue differences, which means weighing together aspects for and against the wind power establishment,was considered difficult to apply by the respondents. Most of them agreed that some of the aspects thatspeak against granting permission could be aggregated but that aggregation of all aspects would be harddue to differences between aspects. In addition, the value of the main aspect that speaks for permission,climate friendly energy supply, is very difficult to estimate. Thus, aggregation based on value differencesis a difficult question and how it could be performed is discussed in the paper. If policymakers wish tomake it possible to take both positive and negative aspects into consideration and to discuss thetrade-offs transparently, the investigated method can be a way forward.
|
|
| 52. |
- Akander, Jan, et al.
(author)
-
Development of an AI model utilizing buildings’ thermal mass to optimize heating energy and indoor temperature in a historical building cocated in a cold climate
- 2024
-
In: Buildings. - : MDPI. - 2075-5309. ; 14:7
-
Journal article (peer-reviewed)abstract
- Historical buildings account for a significant portion of the energy use of today’s building stock, and there are usually limited energy saving measures that can be applied due to antiquarian and esthetic restrictions. The purpose of this case study is to evaluate the use of the building structure of a historical stone building as a heating battery, i.e., to periodically store thermal energy in the building’s structures without physically changing them. The stored heat is later utilized at times of, e.g., high heat demand, to reduce peaking as well as overall heat supply. With the help of Artificial Intelligence and Convolutional Neural Network Deep Learning Modelling, heat supply to the building is controlled by weather forecasting and a binary calendarization of occupancy for the optimization of energy use and power demand under sustained comfortable indoor temperatures. The study performed indicates substantial savings in total (by approximately 30%) and in peaking energy (by approximately 20% based on daily peak powers) in the studied building and suggests that the method can be applied to other, similar cases.
|
|
| 53. |
- Akander, Jan, et al.
(author)
-
The City Hall in Gävle, Sweden : A historic office building
- 2024
-
In: International Energy Agency - Resilient Cooling of Buildings Field Studies Report (Annex 80). - Vienna : Institute of Building Research & Innovation. ; , s. 173-187
-
Book chapter (peer-reviewed)abstract
- This IEA Annex 80 Subtask C report and the associated brochures provide examples of well-documented field studies. These field studies apply resilient cooling technologies to reduce energy demand and carbon emissions for cooling and reduce the overheating risk in different types of buildings, including newly constructed and existing buildings. Examples and details on building information, energy systems, resilient cooling technologies, key performance indicators (KPIs), and performance evaluation amd lessons learned are included in the report and the brochures.The present report summarizes all 13 field study buildings collected in Subtask C of IEA-EBC Annex 80. This summary presents information on the field studies, the resilient cooling technologies applied in the field studies, the KPIs, and the performance evaluation and lessons learned. The values of KPIs for building similar functions, i.e., residential buildings, under different climate conditions were discussed. In the field study brochures, detailed information is inlcuded for each building.The field studies are presented in brochure format. Each brochure contains information in a standardized format. This includes the introduction & climate, building information, resilient cooling, KPI evaluation, design simulation, performance evaluation, discussion, lessons learned, references & key contacts.
|
|
| 54. |
- Akter, Ruzlin, et al.
(author)
-
The effect of leadership and organisational culture on organisational innovation
- 2023
-
In: International Journal of Services Technology and Management. - : Inderscience. - 1460-6720 .- 1741-525X. ; 28:5/6, s. 360-388
-
Journal article (peer-reviewed)abstract
- PurposeThe purpose of the study is to explore the impact of company leadership and organizational culture in the development of organizational innovation.Design/methodology/approachThe qualitative approach is applied via 12 interviews from six different organizations, encompassing both service providers and product manufacturers, in the countries of Sweden and Sri Lanka.FindingsLeadership and organizational culture together influence the development of innovation. The findings suggest that process- and job-oriented culture, as well as transactional leadership, have both positive and negative impacts in developing innovation. Result-oriented, employee-oriented, pragmatic culture and an open system, together with transformational leadership, are found to be more effective.Research limitations/implicationsThis study was limited to six organizations, specific industries and national cultures. Researchers could explore in depth to identify which factors particularly lead to the failure or success of innovativeness in a particular industry, through comparing national cultures.Practical implicationsThis study helps managers decide how to serve best within the organizational and national culture, while learning about the influential result of the culture and leadership on innovation. With the aid of this study, organizations will be able to identify factors that may help them to be innovative and competitive in the market.OriginalityThis study highlights the importance of leadership and organizational cultures effect on an organization's innovation, as well as showing how it improves the companies ability to both meet consumer expectations and contribute to their national economy.
|
|
| 55. |
- Al-Obaidi, Mudhar A., et al.
(author)
-
Optimizing Reverse Osmosis Feed Spacer Design for Enhanced Dimethylphenol Removal from Wastewater: A Study of Hydrodynamics and Performance Indicators
- 2024
-
In: Water. - : MDPI. - 2073-4441. ; 16:6
-
Journal article (peer-reviewed)abstract
- Due to its high pollutant rejection and low energy usage, the spiral wound module of reverse osmosis (RO) process is the most commonly used technology utilised in wastewater treatment. For a spiral wound module, the presence of a feed spacer is important as a key solution to mitigate the concentration polarisation phenomenon, due to disorderly fluid flow, and to improve the mass transfer coefficient. Undoubtedly, improvements in the spiral wound module design, mainly in the symmetrical shape of the feed spacer, can have a significant impact on the cost and probable use of these modules. Despite the wide interest in appraising the impact of feed spacer geometry and orientation on the performance of a spiral wound module for RO process-based water desalination, the hydrodynamics of feed spacers (pressure drop and mass transfer coefficient) and the associated influences of feed spacer design (the height of the feed spacer, the angle of the filaments, and the porosity) on the removal of pollutants from wastewater have not yet been addressed. The current investigation aims to fill this gap by studying the hydrodynamics and design parameters of the selected parallelogram feed spacer type ultrafiltration (UF−3) for the removal of dimethylphenol from wastewater. Using model-based simulation, the impacts of UF−3 feed spacer design parameters, including the height, angle between the filaments (orientation), and porosity on the pressure drop, friction factor, axial flow fluid velocity, mass transfer coefficient, water flux, dimethylphenol rejection, recovery rate, and specific energy consumption are detailed in this study. The study intends to demonstrate the optimum design features of UF−3 feed spacer that should be considered to assure the highest elimination of dimethylphenol from wastewater in addition to the lowest specific energy consumption.
|
|
| 56. |
- Alaneme, George U, et al.
(author)
-
Numerical Analysis and Parametric Study on Multiple Degrees-of-Freedom Frames
- 2023
-
In: Civil Engineering Journal. - : CEJ. - 2676-6957 .- 2476-3055. ; 9:7, s. 1709-1736
-
Journal article (peer-reviewed)abstract
- The design of multiple degrees-of-freedom frames is critical in civil engineering, as these structures are commonly used in various applications such as buildings, bridges, and industrial structures. In this study, a six-degrees-of-freedom beam-column element stiffness matrix was formulated by superposition of beam and truss elements stiffness matrices and was adapted to statically analyze indeterminate frame structures. The development of a numerical model for the frame structures was achieved using the finite element method in the current study. Also, the investigation of the effects of various parameters such as frame geometries, material properties, and loading conditions was conducted on the internal forces developed in the frame structures. Three different parametric study cases that presented the frame structures with varying geometries and loading conditions were analyzed utilizing this matrix approach for the sake of emphasis and to evaluate the flexibility and adequacy of this formula to analyze the indeterminate frames using the MATLAB software. The analysis method comprised the derivation of the system displacements employing the relationships between the stiffness matrix and fixed end forces as the force vector and taking the attained displacements, which would be transformed to the local coordinates to obtain the member forces. The computed results from the element stiffness matrix approach were further statistically compared with the results achieved from the finite element software (SAP2000) applying the analysis of variance (ANOVA). The statistical results showed a P-value > 0.05, which indicated a good correlation between the compared results and adequate performance for the derived beam-column element matrix formula method.
|
|
| 57. |
- Alatalo, J. M., et al.
(author)
-
Bryophyte cover and richness decline after 18 years of experimental warming in alpine Sweden
- 2020
-
In: Aob Plants. - Oxford : Oxford University Press (OUP). - 2041-2851. ; 12:6
-
Journal article (peer-reviewed)abstract
- Climate change is expected to affect alpine and Arctic tundra communities. Most previous long-term studies have focused on impacts on vascular plants, this study examined impacts of long-term warming on bryophyte communities. Experimental warming with open-top chambers (OTCs) was applied for 18 years to a mesic meadow and a dry heath alpine plant community. Species abundance was measured in 1995, 1999, 2001 and 2013. Species composition changed significantly from original communities in the heath, but remained similar in mesic meadow. Experimental warming increased beta diversity in the heath. Bryophyte cover and species richness both declined with long-term warming, while Simpson diversity showed no significant responses. Over the 18-year period, bryophyte cover in warmed plots decreased from 43 % to 11 % in heath and from 68 % to 35 % in meadow (75 % and 48 % decline, respectively, in original cover), while richness declined by 39 % and 26 %, respectively. Importantly, the decline in cover and richness first emerged after 7 years. Warming caused significant increase in litter in both plant communities. Deciduous shrub and litter cover had negative impact on bryophyte cover. We show that bryophyte species do not respond similarly to climate change. Total bryophyte cover declined in both heath and mesic meadow under experimental long-term warming (by 1.5-3 degrees C), driven by general declines in many species. Principal response curve, cover and richness results suggested that bryophytes in alpine heath are more susceptible to warming than in meadow, supporting the suggestion that bryophytes may be less resistant in drier environments than in wetter habitats. Species loss was slower than the decline in bryophyte abundance, and diversity remained similar in both communities. Increased deciduous shrub and litter cover led to decline in bryophyte cover. The non-linear response to warming over time underlines the importance of long-term experiments and monitoring.
|
|
| 58. |
- Alatalo, J. M., et al.
(author)
-
Changes in plant composition and diversity in an alpine heath and meadow after 18 years of experimental warming
- 2022
-
In: Alpine Botany. - Basel : Springer Science and Business Media LLC. - 1664-2201 .- 1664-221X. ; 132, s. 181-193
-
Journal article (peer-reviewed)abstract
- Global warming is expected to have large impacts on high alpine and Arctic ecosystems in the future. Here we report effects of 18 years of experimental warming on two contrasting high alpine plant communities in subarctic Sweden. Using open-top chambers, we analysed effects of long-term passive experimental warming on a heath and a meadow. We determined the impact on species composition, species diversity (at the level of rare, common and dominant species), and phylogenetic and functional diversity. Long-term warming drove differentiation in species composition in both communities; warmed plots, but not control plots, had distinctly different species composition in 2013 compared with 1995. Beta diversity increased in the meadow, while it decreased in the heath. Long-term warming had significant negative effects on the three orders of phylogenetic Hill diversity in the meadow. There was a similar tendency in the heath, but only phylogenetic diversity of dominant species was significantly affected. Long-term warming caused reductions in forbs in the heath, while evergreen shrubs increased. In the meadow, deciduous and evergreen shrubs showed increased abundance from 2001 to 2013 in warmed plots. Responses in species and phylogenetic diversity to experimental warming varied over both time (medium (7 years) vs long-term (18 years)) and space (between two neighbouring plant communities). The meadow community was more negatively affected in terms of species and phylogenetic diversity than the heath community. A potential driver for the changes in the meadow may be decreased soil moisture caused by long-term warming.
|
|
| 59. |
- Alatalo, J. M., et al.
(author)
-
Effects of ambient climate and three warming treatments on fruit production in an alpine, subarctic meadow community
- 2021
-
In: American Journal of Botany. - Oxford : Wiley. - 0002-9122 .- 1537-2197. ; 108:3, s. 411-422
-
Journal article (peer-reviewed)abstract
- Premise Climate change is having major impacts on alpine and arctic regions, and inter-annual variations in temperature are likely to increase. How increased climate variability will impact plant reproduction is unclear. Methods In a 4-year study on fruit production by an alpine plant community in northern Sweden, we applied three warming regimes: (1) a static level of warming with open-top chambers (OTC), (2) press warming, a yearly stepwise increase in warming, and (3) pulse warming, a single-year pulse event of higher warming. We analyzed the relationship between fruit production and monthly temperatures during the budding period, fruiting period, and whole fruit production period and the effect of winter and summer precipitation on fruit production. Results Year and treatment had a significant effect on total fruit production by evergreen shrubs, Cassiope tetragona, and Dryas octopetala, with large variations between treatments and years. Year, but not treatment, had a significant effect on deciduous shrubs and graminoids, both of which increased fruit production over the 4 years, while forbs were negatively affected by the press warming, but not by year. Fruit production was influenced by ambient temperature during the previous-year budding period, current-year fruiting period, and whole fruit production period. Minimum and average temperatures were more important than maximum temperature. In general, fruit production was negatively correlated with increased precipitation. Conclusions These results indicate that predicted increased climate variability and increased precipitation due to climate change may affect plant reproductive output and long-term community dynamics in alpine meadow communities.
|
|
| 60. |
- Alatalo, J. M., et al.
(author)
-
Impact of ambient temperature, precipitation and seven years of experimental warming and nutrient addition on fruit production in an alpine heath and meadow community
- 2022
-
In: Science of the Total Environment. - Amsterdam : Elsevier BV. - 0048-9697 .- 1879-1026. ; 836
-
Journal article (peer-reviewed)abstract
- Alpine and polar regions are predicted to be among the most vulnerable to changes in temperature, precipitation, and nutrient availability. We carried out a seven-year factorial experiment with warming and nutrient addition in two alpine vegetation communities. We analyzed the relationship between fruit production and monthly mean, maximum, and min temperatures during the fall of the pre-fruiting year, the fruiting summer, and the whole fruit production period, and measured the effects of precipitation and growing and thawing degree days (GDD & TDD) on fruit production. Nutrient addition (heath: 27.88 +/- 3.19 fold change at the end of the experiment; meadow: 18.02 +/- 4.07) and combined nutrient addition and warming (heath: 20.63 +/- 29.34 fold change at the end of the experiment; meadow: 18.21 +/- 16.28) increased total fruit production and fruit production of graminoids. Fruit production of evergreen and deciduous shrubs fluctuated among the treatments and years in both the heath and meadow. Pre-maximum temperatures had a negative effect on fruit production in both communities, while current year maximum temperatures had a positive impact on fruit production in the meadow. Pre-minimum, pre-mean, current mean, total minimum, and total mean temperatures were all positively correlated with fruit production in the meadow. The current year and total precipitation had a negative effect on the fruit production of deciduous shrubs in the heath. GDD had a positive effect on fruit production in both communities, while TDD only impacted fruit production in the meadow. Increased nutrient availability increased fruit production over time in the high alpine plant communities, while experimental warming had either no effect or a negative effect. Deciduous shrubs were the most sensitive to climate parameters in both communities, and the meadow was more sensitive than the heath. The difference in importance of TDD for fruit production may be due to differences in snow cover in the two communities.
|
|
