1. |
- Agthe, Michael, et al.
(author)
-
Following in Real Time the Two-Step Assembly of Nanoparticles into Mesocrystals in Levitating Drops
- 2016
-
In: Nano Letters. - : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 16:11, s. 6838-6843
-
Journal article (peer-reviewed)abstract
- Mesocrystals composed of crystallographically aligned nanocrystals are present in biominerals and assembled materials which show strongly directional properties of importance for mechanical protection and functional devices. Mesocrystals are commonly formed by complex biomineralization processes and can also be generated by assembly of anisotropic nanocrystals. Here, we follow the evaporation-induced assembly of maghemite nanocubes into mesocrystals in real time in levitating drops. Analysis of time-resolved small-angle X-ray scattering data and ex situ scanning electron microscopy together with interparticle potential calculations show that the substrate-free, particle-mediated crystallization process proceeds in two stages involving the formation and rapid transformation of a dense, structurally disordered phase into ordered mesocrystals. Controlling and tailoring the particle-mediated formation of mesocrystals could be utilized to assemble designed nanoparticles into new materials with unique functions.
|
|
2. |
- Askari, Sadegh, et al.
(author)
-
Low-Loss and Tunable Localized Mid-Infrared Plasmons in Nanocrystals of Highly Degenerate InN
- 2018
-
In: Nano letters (Print). - : AMER CHEMICAL SOC. - 1530-6984 .- 1530-6992. ; 18:9, s. 5681-5687
-
Journal article (peer-reviewed)abstract
- Plasmonic response of free charges confined in nanostructures of plasmonic materials is a powerful means for manipulating the light-material interaction at the nanoscale and hence has influence on various relevant technologies. In particular, plasmonic materials responsive in the mid-infrared range are technologically important as the mid-infrared is home to the vibrational resonance of molecules and also thermal radiation of hot objects. However, the development of the field is practically challenged with the lack of low-loss materials supporting high quality plasmons in this range of the spectrum. Here, we demonstrate that degenerately doped InN nanocrystals (NCs) support tunable and low-loss plasmon resonance spanning the entire midwave infrared range. Modulating free-carrier concentration is achieved by engineering nitrogen-vacancy defects (InN1-x, 0.017 amp;lt; x amp;lt; 0.085) in highly degenerate NCs using a nonequilibrium gas-phase growth process. Despite the significant reduction in the carrier mobility relative to intrinsic InN, the mobility in degenerate InN NCs (amp;gt;60 cm(2)/(V s)) remains considerably higher than the carrier mobility reported for other materials NCs such as doped metal oxides, chalcogenides, and noble metals. These findings demonstrate feasibility of controlled tuning of infrared plasmon resonances in a low-loss material of III-V compounds and open a gateway to further studies of these materials nanostructures for infrared plasmonic applications.
|
|
3. |
- Assali, S., et al.
(author)
-
Crystal Phase Quantum Well Emission with Digital Control
- 2017
-
In: Nano letters (Print). - : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 17:10, s. 6062-6068
-
Journal article (peer-reviewed)abstract
- One of the major challenges in the growth of quantum well and quantum dot heterostructures is the realization of atomically sharp interfaces. Nanowires provide a new opportunity to engineer the band structure as they facilitate the controlled switching of the crystal structure between the zinc-blende (ZB) and wurtzite (WZ) phases. Such a crystal phase switching results in the formation of crystal phase quantum wells (CPQWs) and quantum dots (CPQDs). For GaP CPQWs, the inherent electric fields due to the discontinuity of the spontaneous polarization at the WZ/ZB junctions lead to the confinement of both types of charge carriers at the opposite interfaces of the WZ/ZB/WZ structure. This confinement leads to a novel type of transition across a ZB flat plate barrier. Here, we show digital tuning of the visible emission of WZ/ZB/WZ CPQWs in a GaP nanowire by changing the thickness of the ZB barrier. The energy spacing between the sharp emission lines is uniform and is defined by the addition of single ZB monolayers. The controlled growth of identical quantum wells with atomically flat interfaces at predefined positions featuring digitally tunable discrete emission energies may provide a new route to further advance entangled photons in solid state quantum systems.
|
|
4. |
- Barrigón, E., et al.
(author)
-
GaAs Nanowire pn-Junctions Produced by Low-Cost and High-Throughput Aerotaxy
- 2018
-
In: Nano Letters. - : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 18:2, s. 1088-1092
-
Journal article (peer-reviewed)abstract
- Semiconductor nanowires could significantly boost the functionality and performance of future electronics, light-emitting diodes, and solar cells. However, realizing this potential requires growth methods that enable high-throughput and low-cost production of nanowires with controlled doping. Aerotaxy is an aerosol-based method with extremely high growth rate that does not require a growth substrate, allowing mass-production of high-quality nanowires at a low cost. So far, pn-junctions, a crucial element of solar cells and light-emitting diodes, have not been realized by Aerotaxy growth. Here we report a further development of the Aerotaxy method and demonstrate the growth of GaAs nanowire pn-junctions. Our Aerotaxy system uses an aerosol generator for producing the catalytic seed particles, together with a growth reactor with multiple consecutive chambers for growth of material with different dopants. We show that the produced nanowire pn-junctions have excellent diode characteristics with a rectification ratio of >105, an ideality factor around 2, and very promising photoresponse. Using electron beam induced current and hyperspectral cathodoluminescence, we determined the location of the pn-junction and show that the grown nanowires have high doping levels, as well as electrical properties and diffusion lengths comparable to nanowires grown using metal organic vapor phase epitaxy. Our findings demonstrate that high-quality GaAs nanowire pn-junctions can be produced using a low-cost technique suitable for mass-production, paving the way for industrial-scale production of nanowire-based solar cells.
|
|
5. |
- Barzegar, Hamid Reza, 1977-, et al.
(author)
-
C60/Collapsed Carbon Nanotube Hybrids : A Variant of Peapods
- 2015
-
In: Nano letters (Print). - : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 15:2, s. 829-834
-
Journal article (peer-reviewed)abstract
- We examine a variant of so-called carbon nanotube peapods by packing C60 molecules inside the open edge ducts of collapsed carbon nanotubes. C60 insertion is accomplished through a facile single-step solution-based process. Theoretical modeling is used to evaluate favorable low-energy structural configurations. Overfilling of the collapsed tubes allows infiltration of C60 over the full cross-section of the tubes and consequent partial or complete reinflation, yielding few-wall, large diameter cylindrical nanotubes packed with crystalline C60 solid cores.
|
|
6. |
- Barzegar, Hamid Reza, et al.
(author)
-
Electrostatically Driven Nanoballoon Actuator
- 2016
-
In: Nano letters (Print). - : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 16:11, s. 6787-6791
-
Journal article (peer-reviewed)abstract
- We demonstrate an inflatable nanoballoon actuator based on geometrical transitions between the inflated (cylindrical) and collapsed (flattened) forms of a carbon nanotube. In situ transmission electron microscopy experiments employing a nanoelectromechanical manipulator show that a collapsed carbon nanotube can be reinflated by electrically charging the nanotube, thus realizing an electrostatically driven nanoballoon actuator. We find that the tube actuator can be reliably cycled with only modest control voltages (few volts) with no apparent wear or fatigue. A complementary theoretical analysis identifies critical parameters for nanotube nanoballoon actuation.
|
|
7. |
- Barzegar, Hamid Reza, et al.
(author)
-
Self-assembled PCBM nanosheets : a facile route to electronic layer-on-Layer heterostructures
- 2018
-
In: Nano letters (Print). - : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 18:2, s. 1442-1447
-
Journal article (peer-reviewed)abstract
- We report on the self-assembly of semicrystalline [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) nanosheets at the interface between a hydrophobic solvent and water, and utilize this opportunity for the realization of electronically active organic/organic molecular heterostructures. The self-assembled PCBM nanosheets can feature a lateral size of >1 cm2 and be transferred from the water surface to both hydrophobic and hydrophilic surfaces using facile transfer techniques. We employ a transferred single PCBM nanosheet as the active material in a field-effect transistor (FET) and verify semiconductor function by a measured electron mobility of 1.2 × 10–2 cm2 V–1 s–1 and an on–off ratio of ∼1 × 104. We further fabricate a planar organic/organic heterostructure with the p-type organic semiconductor poly(3-hexylthiophene-2,5-diyl) as the bottom layer and the n-type PCBM nanosheet as the top layer and demonstrate ambipolar FET operation with an electron mobility of 8.7 × 10–4 cm2 V–1 s–1 and a hole mobility of 3.1 × 10–4 cm2V–1 s–1.
|
|
8. |
- Bavinck, Maaike Bouwes, et al.
(author)
-
Photon Cascade from a Single Crystal Phase Nanowire Quantum Dot
- 2016
-
In: Nano letters (Print). - : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 16:2, s. 1081-1085
-
Journal article (peer-reviewed)abstract
- We report the first comprehensive experimental and theoretical study of the optical properties of single crystal phase quantum dots in InP nanowires. Crystal phase quantum dots are defined by a transition in the crystallographic lattice between zinc blende and wurtzite segments and therefore offer unprecedented potential to be controlled with atomic layer accuracy without random alloying. We show for the first time that crystal phase quantum dots are a source of pure single-photons and cascaded photon-pairs from type II transitions with excellent optical properties in terms of intensity and line width. We notice that the emission spectra consist often of two peaks close in energy, which we explain with a comprehensive theory showing that the symmetry of the system plays a crucial role for the hole levels forming hybridized orbitals. Our results state that crystal phase quantum dots have promising quantum optical properties for single photon application and quantum optics.
|
|
9. |
- Benter, S., et al.
(author)
-
Quasi One-Dimensional Metal-Semiconductor Heterostructures
- 2019
-
In: Nano Letters. - : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 19:6, s. 3892-3897
-
Journal article (peer-reviewed)abstract
- The band offsets occurring at the abrupt heterointerfaces of suitable material combinations offer a powerful design tool for high performance or even new kinds of devices. Because of a large variety of applications for metal-semiconductor heterostructures and the promise of low-dimensional systems to present exceptional device characteristics, nanowire heterostructures gained particular interest over the past decade. However, compared to those achieved by mature two-dimensional processing techniques, quasi one-dimensional (1D) heterostructures often suffer from low interface and crystalline quality. For the GaAs-Au system, we demonstrate exemplarily a new approach to generate epitaxial and single crystalline metal-semiconductor nanowire heterostructures with atomically sharp interfaces using standard semiconductor processing techniques. Spatially resolved Raman measurements exclude any significant strain at the lattice mismatched metal-semiconductor heterojunction. On the basis of experimental results and simulation work, a novel self-assembled mechanism is demonstrated which yields one-step reconfiguration of a semiconductor-metal core-shell nanowire to a quasi 1D axially stacked heterostructure via flash lamp annealing. Transmission electron microscopy imaging and electrical characterization confirm the high interface quality resulting in the lowest Schottky barrier for the GaAs-Au system reported to date. Without limiting the generality, this novel approach will open up new opportunities in the syntheses of other metal-semiconductor nanowire heterostructures and thus facilitate the research of high-quality interfaces in metal-semiconductor nanocontacts.
|
|
10. |
- Berg, Alexander, et al.
(author)
-
Radial Nanowire Light-Emitting Diodes in the (AlxGa1-x)yIn1-yP Material System
- 2016
-
In: Nano letters (Print). - Washington, DC : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 16:1, s. 656-662
-
Journal article (peer-reviewed)abstract
- Nanowires have the potential to play an important role for next-generation light-emitting diodes. In this work, we present a growth scheme for radial nanowire quantum-well structures in the AlGaInP material system using a GaInP nanowire core as a template for radial growth with GaInP as the active layer for emission and AlGaInP as charge carrier barriers. The different layers were analyzed by X-ray diffraction to ensure lattice-matched radial structures. Furthermore, we evaluated the material composition and heterojunction interface sharpness by scanning transmission electron microscopy energy dispersive X-ray spectroscopy. The electro-optical properties were investigated by injection luminescence measurements. The presented results can be a valuable track toward radial nanowire light-emitting diodes in the AlGaInP material system in the red/orange/yellow color spectrum. © 2015 American Chemical Society.
|
|
11. |
- Bi, Zhaoxia, et al.
(author)
-
InGaN Platelets : Synthesis and Applications toward Green and Red Light-Emitting Diodes
- 2019
-
In: Nano Letters. - : American Chemical Society. - 1530-6984 .- 1530-6992. ; 19:5, s. 2832-2839
-
Journal article (peer-reviewed)abstract
- In this work, we present a method to synthesize arrays of hexagonal InGaN submicrometer platelets with a top c-plane area having an extension of a few hundred nanometers by selective area metal-organic vapor-phase epitaxy. The InGaN platelets were made by in situ annealing of InGaN pyramids, whereby InGaN from the pyramid apex was thermally etched away, leaving a c-plane surface, while the inclined {101Ì1} planes of the pyramids were intact. The as-formed c-planes, which are rough with islands of a few tens of nanometers, can be flattened with InGaN regrowth, showing single bilayer steps and high-quality optical properties (full width at half-maximum of photoluminescence at room temperature: 107 meV for In 0.09 Ga 0.91 N and 151 meV for In 0.18 Ga 0.82 N). Such platelets offer surfaces having relaxed lattice constants, thus enabling shifting the quantum well emission from blue (as when grown on GaN) to green and red. For single InGaN quantum wells grown on the c-plane of such InGaN platelets, a sharp interface between the quantum well and the barriers was observed. The emission energy from the quantum well, grown under the same conditions, was shifted from 2.17 eV on In 0.09 Ga 0.91 N platelets to 1.95 eV on In 0.18 Ga 0.82 N platelets as a result of a thicker quantum well and a reduced indium pulling effect on In 0.18 Ga 0.82 N platelets. On the basis of this method, prototype light-emitting diodes were demonstrated with green emission on In 0.09 Ga 0.91 N platelets and red emission on In 0.18 Ga 0.82 N platelets.
|
|
12. |
- Bisht, Ankit, 1988, et al.
(author)
-
Collective Strong Light-Matter Coupling in Hierarchical Microcavity-Plasmon-Exciton Systems
- 2019
-
In: Nano Letters. - : American Chemical Society (ACS). - 1530-6992 .- 1530-6984. ; 19:1, s. 189-196
-
Journal article (peer-reviewed)abstract
- Polaritons are compositional light-matter quasiparticles that arise as a result of strong coupling between the vacuum field of a resonant optical cavity and electronic excitations in quantum emitters. Reaching such a regime is often hard, as it requires materials possessing high oscillator strengths to interact with the relevant optical mode. Two-dimensional transition metal dichalcogenides (TMDCs) have recently emerged as promising candidates for realization of strong coupling regime at room temperature. However, these materials typically provide coupling strengths in the range of 10−40 meV, which may be insufficient for reaching strong coupling with low quality factor resonators. Here, we demonstrate a universal scheme that allows a straightforward realization of strong coupling with 2D materials and beyond. By intermixing plasmonic excitations in nanoparticle arrays with excitons in a WS2 monolayer inside a resonant metallic microcavity, we fabricate a hierarchical system with the collective microcavity−plasmon−exciton Rabi splitting exceeding ∼500 meV at room temperature. Photoluminescence measurements of the coupled systems show dominant emission from the lower polariton branch, indicating the participation of excitons in the coupling process. Strong coupling has been recently suggested to affect numerous optical- and material-related properties including chemical reactivity, exciton transport, and optical nonlinearities. With the universal scheme presented here, strong coupling across a wide spectral range is within easy reach and therefore exploration of these exciting phenomena can be further pursued in a much broader class of materials.
|
|
13. |
- Block, Stephan, 1978, et al.
(author)
-
Quantification of Multivalent Interactions by Tracking Single Biological Nanoparticle Mobility on a Lipid Membrane
- 2016
-
In: Nano Letters. - : American Chemical Society (ACS). - 1530-6992 .- 1530-6984. ; 16:7, s. 4382-4390
-
Journal article (peer-reviewed)abstract
- Macromolecular association commonly occurs via dynamic engagement of multiple weak bonds referred to as multivalent interactions. The distribution of the number of bonds, combined with their strong influence on the residence time, makes it very demanding to quantify this type of interaction. To address this challenge in the context of virology, we mimicked the virion association to a cell membrane by attaching lipid vesicles (100 nm diameter) to a supported lipid bilayer via multiple, identical cholesterol based DNA linker molecules, each mimicking an individual virion receptor link. Using total internal reflection microscopy to track single attached vesicles combined with a novel filtering approach, we show that histograms of the vesicle diffusion coefficient D exhibit a spectrum of distinct peaks, which are associated with vesicles differing in the number, n, of linking DNA tethers. These peaks are only observed if vesicles with transient changes in n are excluded from the analysis. D is found to be proportional to 1/n, in excellent agreement with the free draining model, allowing to quantify transient changes of n on the single vesicle level and to extract transition rates between individual linking states. Necessary imaging conditions to extend the analysis to multivalent interactions in general are also reported.
|
|
14. |
- Borgani, Riccardo, et al.
(author)
-
Local Charge Injection and Extraction on Surface-Modified Al2O3Nanoparticles in LDPE
- 2016
-
In: Nano letters (Print). - : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 16:9, s. 5934-5937
-
Journal article (peer-reviewed)abstract
- We use a recently developed scanning probe technique to image with high spatial resolution the injection and extraction of charge around individual surface-modified aluminum oxide nanoparticles embedded in a low-density polyethylene (LDPE) matrix. We find that the experimental results are consistent with a simple band structure model where localized electronic states are available in the band gap (trap states) in the vicinity of the nanoparticles. This work offers experimental support to a previously proposed mechanism for enhanced insulating properties of nanocomposite LDPE and provides a powerful experimental tool to further investigate such properties.
|
|
15. |
- Borglin, Johan, 1986, et al.
(author)
-
Peptide Functionalized Gold Nanoparticles as a Stimuli Responsive Contrast Medium in Multiphoton Microscopy
- 2017
-
In: Nano Letters. - : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 17:3, s. 2102-2108
-
Journal article (peer-reviewed)abstract
- There is a need for biochemical contrast mediators with high signal-to-noise ratios enabling noninvasive biomedical sensing, for example, for neural sensing and protein protein interactions, in addition to cancer diagnostics. The translational challenge is to develop a biocompatible approach ensuring high biochemical contrast while avoiding a raise of the background signal. We here present a concept where gold nanoparticles (AuNPs) can be utilized as a stimuli responsive contrast medium by chemically triggering their ability to exhibit multiphoton-induced luminescence (MIL) when performing multiphoton laser scanning microscopy (MPM). Proof-of-principle is demonstrated using peptide-functionalized AuNPs sensitive to zinc ions (Zn2+). Dispersed particles are invisible in the MPM until addition of millimolar concentrations of Zn2+ upon which MIL is enabled through particle aggregation caused by specific peptide interactions and folding. The process can be reversed by removal of the Zn2+ using a chelator, thereby resuspending the AuNPs. In addition, the concept was demonstrated by exposing the particles to matrix metalloproteinase-7 (MMP-7) causing peptide digestion resulting in AuNP aggregation, significantly elevating the MIL signal from the background. The approach is based on the principle that aggregation shifts the plasmon resonance, elevating the absorption cross section in the near-infrared wavelength region enabling onset of MIL. This Letter demonstrates how biochemical sensing can be obtained in far-field MPM and should be further exploited as a future tool for noninvasive optical biosensing.
|
|
16. |
- Boström, Emil Viñas, et al.
(author)
-
Charge Separation in Donor-C60 Complexes with Real-Time Green Functions : The Importance of Nonlocal Correlations
- 2018
-
In: Nano Letters. - : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 18:2, s. 785-792
-
Journal article (peer-reviewed)abstract
- We use the nonequilibrium Green function (NEGF) method to perform real-time simulations of the ultrafast electron dynamics of photoexcited donor-C60 complexes modeled by a Pariser-Parr-Pople Hamiltonian. The NEGF results are compared to mean-field Hartree-Fock (HF) calculations to disentangle the role of correlations. Initial benchmarking against numerically highly accurate time-dependent density matrix renormalization group calculations verifies the accuracy of NEGF. We then find that charge-transfer (CT) excitons partially decay into charge separated (CS) states if dynamical nonlocal correlation corrections are included. This CS process occurs in ∼10 fs after photoexcitation. In contrast, the probability of exciton recombination is almost 100% in HF simulations. These results are largely unaffected by nuclear vibrations; the latter become however essential whenever level misalignment hinders the CT process. The robust nature of our findings indicates that ultrafast CS driven by correlation-induced decoherence may occur in many organic nanoscale systems, but it will only be correctly predicted by theoretical treatments that include time-nonlocal correlations.
|
|
17. |
- Brown, Keith A., et al.
(author)
-
Machine Learning in Nanoscience : Big Data at Small Scales
- 2019
-
In: Nano Letters. - : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 20:1, s. 2-10
-
Research review (peer-reviewed)abstract
- Recent advances in machine learning (ML) offer new tools to extract new insights from large data sets and to acquire small data sets more effectively. Researchers in nanoscience are experimenting with these tools to tackle challenges in many fields. In addition to ML's advancement of nanoscience, nanoscience provides the foundation for neuromorphic computing hardware to expand the implementation of ML algorithms. In this Mini Review, we highlight some recent efforts to connect the ML and nanoscience communities by focusing on three types of interaction: (1) using ML to analyze and extract new insights from large nanoscience data sets, (2) applying ML to accelerate material discovery, including the use of active learning to guide experimental design, and (3) the nanoscience of memristive devices to realize hardware tailored for ML. We conclude with a discussion of challenges and opportunities for future interactions between nanoscience and ML researchers.
|
|
18. |
- Burke, Adam, et al.
(author)
-
InAs Nanowire Transistors with Multiple, Independent Wrap-Gate Segments.
- 2015
-
In: Nano Letters. - : American Chemical Society (ACS). - 1530-6992 .- 1530-6984. ; 15:5, s. 2836-2843
-
Journal article (peer-reviewed)abstract
- We report a method for making horizontal wrap-gate nanowire transistors with up to four independently controllable wrap-gated segments. While the step up to two independent wrap-gates requires a major change in fabrication methodology, a key advantage to this new approach, and the horizontal orientation more generally, is that achieving more than two wrap-gate segments then requires no extra fabrication steps. This is in contrast to the vertical orientation, where a significant subset of the fabrication steps needs to be repeated for each additional gate. We show that cross-talk between adjacent wrap-gate segments is negligible despite separations less than 200 nm. We also demonstrate the ability to make multiple wrap-gate transistors on a single nanowire using the exact same process. The excellent scalability potential of horizontal wrap-gate nanowire transistors makes them highly favorable for the development of advanced nanowire devices and possible integration with vertical wrap-gate nanowire transistors in 3D nanowire network architectures.
|
|
19. |
- Carrad, D J, et al.
(author)
-
Hybrid Nanowire Ion-to-Electron Transducers for Integrated Bioelectronic Circuitry
- 2017
-
In: Nano Letters. - : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 17:2, s. 827-833
-
Journal article (peer-reviewed)abstract
- A key task in the emerging field of bioelectronics is the transduction between ionic/protonic and electronic signals at high fidelity. This is a considerable challenge since the two carrier types exhibit intrinsically different physics and are best supported by very different materials types - electronic signals in inorganic semiconductors and ionic/protonic signals in organic or bio-organic polymers, gels, or electrolytes. Here we demonstrate a new class of organic-inorganic transducing interface featuring semiconducting nanowires electrostatically gated using a solid proton-transporting hygroscopic polymer. This model platform allows us to study the basic transducing mechanisms as well as deliver high fidelity signal conversion by tapping into and drawing together the best candidates from traditionally disparate realms of electronic materials research. By combining complementary n- and p-type transducers we demonstrate functional logic with significant potential for scaling toward high-density integrated bioelectronic circuitry.
|
|
20. |
- Cavalli, Alessandro, et al.
(author)
-
High-Yield Growth and Characterization of < 100 > InP p-n Diode Nanowires
- 2016
-
In: Nano letters (Print). - : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 16:5, s. 3071-3077
-
Journal article (peer-reviewed)abstract
- Semiconductor nanowires are nanoscale structures holding promise in many fields such as optoelectronics, quantum computing, and thermoelectrics. Nanowires are usually grown vertically on (111)-oriented substrates, while (100) is the standard in semiconductor technology. The ability to grow and to control impurity doping of (100) nanowires is crucial for integration. Here, we discuss doping of single-crystalline < 100 > nanowires, and the structural and optoelectronic properties of p-n junctions based on < 100 > InP nanowires. We describe a novel approach to achieve low resistance electrical contacts to nanowires via a gradual interface based on p-doped InAsP. As a first demonstration in optoelectronic devices, we realize a single nanowire light emitting diode in a < 100 >-oriented InP nanowire p-n junction. To obtain high vertical yield, which is necessary for future applications, we investigate the effect of the introduction of dopants on the nanowire growth.
|
|
21. |
- Celano, U., et al.
(author)
-
Chasing Plasmons in Flatland
- 2019
-
In: Nano Letters. - : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 19:11, s. 7549-7552
-
Research review (peer-reviewed)abstract
- Two-dimensional layered crystals, including graphene and transition metal dichalcogenides, represent an interesting avenue for studying light-matter interactions at the nanoscale in confined geometries. They offer several attractive properties, such as large exciton binding energies, strong excitonic resonances, and tunable bandgaps from the visible to the near-IR along with large spin-orbit coupling, direct band gap transitions, and valley-selective responses.
|
|
22. |
- Chen, G., et al.
(author)
-
Energy-Cascaded Upconversion in an Organic Dye-Sensitized Core/Shell Fluoride Nanocrystal
- 2015
-
In: Nano letters (Print). - : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 15:11, s. 7400-7407
-
Journal article (peer-reviewed)abstract
- Lanthanide-doped upconversion nanoparticles hold promises for bioimaging, solar cells, and volumetric displays. However, their emission brightness and excitation wavelength range are limited by the weak and narrowband absorption of lanthanide ions. Here, we introduce a concept of multistep cascade energy transfer, from broadly infrared-harvesting organic dyes to sensitizer ions in the shell of an epitaxially designed core/shell inorganic nanostructure, with a sequential nonradiative energy transfer to upconverting ion pairs in the core. We show that this concept, when implemented in a core-shell architecture with suppressed surface-related luminescence quenching, yields multiphoton (three-, four-, and five-photon) upconversion quantum efficiency as high as 19% (upconversion energy conversion efficiency of 9.3%, upconversion quantum yield of 4.8%), which is about ∼100 times higher than typically reported efficiency of upconversion at 800 nm in lanthanide-based nanostructures, along with a broad spectral range (over 150 nm) of infrared excitation and a large absorption cross-section of 1.47 × 10-14 cm2 per single nanoparticle. These features enable unprecedented three-photon upconversion (visible by naked eye as blue light) of an incoherent infrared light excitation with a power density comparable to that of solar irradiation at the Earth surface, having implications for broad applications of these organic-inorganic core/shell nanostructures with energy-cascaded upconversion.
|
|
23. |
- Chen, I. Ju, et al.
(author)
-
Conduction Band Offset and Polarization Effects in InAs Nanowire Polytype Junctions
- 2017
-
In: Nano Letters. - : American Chemical Society (ACS). - 1530-6984 .- 1530-6992. ; 17:2, s. 902-908
-
Journal article (peer-reviewed)abstract
- Although zinc-blende (ZB) and wurtzite (WZ) structures differ only in the atomic stacking sequence, mixing of crystal phases can strongly affect the electronic properties, a problem particularly common to bottom up-grown nanostructures. A lack of understanding of the nature of electronic transport at crystal phase junctions thus severely limits our ability to develop functional nanowire devices. In this work we investigated electron transport in InAs nanowires with designed mixing of crystal structures, ZB/WZ/ZB, by temperature-dependent electrical measurements. The WZ inclusion gives rise to an energy barrier in the conduction band. Interpreting the experimental result in terms of thermionic emission and using a drift-diffusion model, we extracted values for the WZ/ZB band offset, 135 ± 10 meV, and interface sheet polarization charge density on the order of 10-3 C/m2. The extracted polarization charge density is 1-2 orders of magnitude smaller than previous experimental results, but in good agreement with first principle calculation of spontaneous polarization in WZ InAs. When the WZ length is reduced below 20 nm, an effective barrier lowering is observed, indicating the increasing importance of tunneling transport. Finally, we found that band-bending at ZB/WZ junctions can lead to bound electron states within an enclosed WZ segment of sufficient length, evidenced by our observation of Coulomb blockade at low temperature. These findings provide critical input for modeling and designing the electronic properties of novel functional devices, such as nanowire transistors, where crystal polytypes are commonly found.
|
|
24. |
- Chen, Shula, et al.
(author)
-
Dilute Nitride Nanowire Lasers Based on a GaAs/GaNAs Core/Shell Structure
- 2017
-
In: Nano letters (Print). - : AMER CHEMICAL SOC. - 1530-6984 .- 1530-6992. ; 17:3, s. 1775-1781
-
Journal article (peer-reviewed)abstract
- Nanowire (NW) lasers operating in the near infrared spectral range are of significant technological importance for applications in telecommunications, sensing, and medical diagnostics. So far, lasing within this spectral range has been achieved using GaAs/AlGaAs, GaAs/GaAsP, and InGaAs/GaAs core/shell NWs. Another promising III-V material, not yet explored in its lasing capacity, is the dilute nitride GaNAs. In this work, we demonstrate, for the first time, optically pumped lasing from the GaNAs shell of a single GaAs/GaNAs core/shell NW. The characteristic "S"-shaped pump power dependence of the lasing intensity, with the concomitant line width narrowing, is observed, which yields a threshold gain, g(th), of 3300 cm(-1) and a spontaneous emission coupling factor beta, of 0.045. The dominant lasing peak is identified to arise from the HE21b, cavity mode, as determined from its pronounced emission polarization along the NW axis combined with theoretical calculations of lasing threshold for guided modes inside the nanowire. Even without intentional pas sivation of the NW surface, the lasing emission can be sustained up to 150 K. This is facilitated by the improved surface quality due to nitrogen incorporation, which partly suppresses the surface-related nonradiative recombination centers via nitridation. Our work therefore represents the first step toward development of room-temperature infrared NW lasers based on dilute nitrides with extended tunability in the lasing wavelength.
|
|
25. |
- Chen, Shula, et al.
(author)
-
Near-Infrared Lasing at 1 mu m from a Dilute-Nitride-Based Multishell Nanowire
- 2019
-
In: Nano letters (Print). - : AMER CHEMICAL SOC. - 1530-6984 .- 1530-6992. ; 19:2, s. 885-890
-
Journal article (peer-reviewed)abstract
- A coherent photon source emitting at near-infrared (NIR) wavelengths is at the heart of a wide variety of applications ranging from telecommunications and optical gas sensing to biological imaging and metrology. NIR-emitting semiconductor nanowires (NWs), acting both as a miniaturized optical resonator and as a photonic gain medium, are among the best-suited nanomaterials to achieve such goals. In this study, we demonstrate the NIR lasing at 1 mu m from GaAs/GaNAs/GaAs core/shell/cap dilute nitride nanowires with only 2.5% nitrogen. The achieved lasing is characterized by an S-shape pump-power dependence and narrowing of the emission line width. Through examining the lasing performance from a set of different single NWs, a threshold gain, g(th), of 4100-4800 cm(-1), was derived with a spontaneous emission coupling factor, beta, up to 0.8, which demonstrates the great potential of such nanophotonic material. The lasing mode was found to arise from the fundamental HE11a mode of the Fabry-Perot cavity from a single NW, exhibiting optical polarization along the NW axis. Based on temperature dependence of the lasing emission, a high characteristic temperature, T-0, of 160 (+/- 10) K is estimated. Our results, therefore, demonstrate a promising alternative route to achieve room-temperature NIR NW lasers thanks to the excellent alloy tunability and superior optical performance of such dilute nitride materials.
|
|