1. |
- Mantsinen, M. J., et al.
(author)
-
Localized bulk electron heating with ICRF mode conversion in the JET tokamak
- 2004
-
In: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 44:1, s. 33-46
-
Journal article (peer-reviewed)abstract
- Ion cyclotron resonance frequencies (ICRF) mode conversion has been developed for localized on-axis and off-axis bulk electron heating on the JET tokamak. The fast magnetosonic waves launched from the low-field side ICRF antennas are mode-converted to short-wavelength waves on the high-field side of the He-3 ion cyclotron resonance layer in D and He-4 plasmas and subsequently damped on the bulk electrons. The resulting electron power deposition, measured using ICRF power modulation, is narrow with a typical full-width at half-maximum of approximate to30 cm (i.e. about 30% of the minor radius) and the total deposited power to electrons comprises at least up to 80% of the applied ICRF power. The ICRF mode conversion power deposition has been kept constant using He-3 bleed throughout the ICRF phase with a typical duration of 4-6 s, i.e. 15-40 energy confinement times. Using waves propagating in the counter-current direction minimizes competing ion damping in the presence of co-injected deuterium beam ions.
|
|
2. |
- Noterdaeme, J. M., et al.
(author)
-
Heating, current drive and energetic particle studies on JET in preparation of ITER operation
- 2003
-
In: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 43:3, s. 202-209
-
Journal article (peer-reviewed)abstract
- This paper summarizes the recent work on JET in the three areas of heating, current drive and energetic particles. The achievements have extended the possibilities of JET, have a direct connection to ITER operation and provide new and interesting physics. Toroidal rotation profiles of plasmas heated far off axis with little or no refuelling or momentum input are hollow with only small differences on whether the power deposition is located on the low field side or on the high field side. With LH current drive the magnetic shear was varied from slightly positive to negative. The improved coupling (through the use of plasma shaping and CD4) allowed up to 3.4 MW of PLH in internal transport barrier (ITB) plasmas with more than 15 MW of combined NBI and ICRF heating. The q-profile with negative magnetic shear and the ITB could be maintained for the duration of the high heating pulse (8 s). Fast ions have been produced in JET with ICRF to simulate alpha particles: by using third harmonic He-4 heating, beam injected He-4 at 120 kV were accelerated to energies above 2 MeV taking advantage of the unique capability of JET to use NBI with 4 He and to confine MeV class ions. ICRF heating was used to replicate the dynamics of alpha heating and the control of an equivalent Q = 10 `burn' was simulated.
|
|
3. |
- Noterdaeme, J. M., et al.
(author)
-
Spatially resolved toroidal plasma rotation with ICRF on JET
- 2003
-
In: Nuclear Fusion. - : IOP Publishing. - 0029-5515 .- 1741-4326. ; 43:4, s. 274-289
-
Journal article (peer-reviewed)abstract
- Plasmas heated by ICRF only in the JET tokamak show distinct structures in the toroidal rotation profile, with regions where domega/dr > 0 when the minority cyclotron resonance layer is far off-axis. The rotation is dominantly co-current with a clear off-axis maximum. There is only a slight difference between a high-field side (HFS) or a low-field side position of this resonance layer: the off-axis maximum in the rotation profile is modestly higher for the HFS position. This is in contrast to the predictions of theories that rely mainly on the effects arising from ICRF-driven fast ions to account for ICRF-induced plasma rotation. The differences due to the direction of the antenna spectrum (co- or counter-) are small. A more central deposition of the ICRF power in L-mode and operation in H-mode both lead to more centrally peaked profiles, both in the co-direction. Strong MHD modes brake the rotation and lead to overall flat rotation profiles.
|
|