1. |
- Labit, B., et al.
(author)
-
Dependence on plasma shape and plasma fueling for small edge-localized mode regimes in TCV and ASDEX Upgrade
- 2019
-
In: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 59:8
-
Journal article (peer-reviewed)abstract
- © 2019 Institute of Physics Publishing. All rights reserved. Within the EUROfusion MST1 work package, a series of experiments has been conducted on AUG and TCV devices to disentangle the role of plasma fueling and plasma shape for the onset of small ELM regimes. On both devices, small ELM regimes with high confinement are achieved if and only if two conditions are fulfilled at the same time. Firstly, the plasma density at the separatrix must be large enough (ne,sep/nG ∼ 0.3), leading to a pressure profile flattening at the separatrix, which stabilizes type-I ELMs. Secondly, the magnetic configuration has to be close to a double null (DN), leading to a reduction of the magnetic shear in the extreme vicinity of the separatrix. As a consequence, its stabilizing effect on ballooning modes is weakened.
|
|
2. |
- Komm, M., et al.
(author)
-
Simulations of thermionic suppression during tungsten transient melting experiments
- 2017
-
In: Physica Scripta. - : Institute of Physics (IOP). - 0031-8949 .- 1402-4896. ; T170
-
Journal article (peer-reviewed)abstract
- Plasma-facing components receive enormous heat fluxes under steady state and especially during transient conditions that can even lead to tungsten (W) melting. Under these conditions, the unimpeded thermionic current density emitted from the W surfaces can exceed the incident plasma current densities by several orders of magnitude triggering a replacement current which drives melt layer motion via the J x B force. However, in tokamaks, the thermionic current is suppressed by space-charge effects and prompt re-deposition due to gyro-rotation. We present comprehensive results of particle-in-cell modelling using the 2D3V code SPICE2 for the thermionic emissive sheath of tungsten. Simulations have been performed for various surface temperatures and selected inclinations of the magnetic field corresponding to the leading edge and sloped exposures. The surface temperature dependence of the escaping thermionic current and its limiting value are determined for various plasma parameters; for the leading edge geometry, the results agree remarkably well with the Takamura analytical model. For the sloped geometry, the limiting value is observed to be proportional to the thermal electron current and a simple analytical expression is proposed that accurately reproduces the numerical results.
|
|
3. |
|
|
4. |
- Komm, M., et al.
(author)
-
Contribution to the multi-machine pedestal scaling from the COMPASS tokamak
- 2017
-
In: Nuclear Fusion. - : Institute of Physics (IOP). - 0029-5515 .- 1741-4326. ; 57:5
-
Journal article (peer-reviewed)abstract
- First systematic measurements of pedestal structure during Ohmic and NBI-assisted Type I ELMy H-modes were performed on the COMPASS tokamak in two dedicated experimental campaigns during 2015 and 2016. By adjusting the NBI heating and a toroidal magnetic field, the electron pedestal temperature was increased from 200 eV up to 300 eV, which allowed reaching pedestal collisionality nu(ped)* < 1 at q(95) similar to 3. COMPASS has approached conditions for the Identity experiment done at JET & DIII-D, complementing the range of scanned rho(ped)*. The pedestal pressure was successfully reproduced by the EPED model. The dependence of pedestal pressure width on nu(ped)* and beta(pol)(ped) is discussed.
|
|
5. |
- Ratynskaia, Svetlana V., et al.
(author)
-
Tungsten dust remobilization under steady-state and transient plasma conditions
- 2017
-
In: NUCLEAR MATERIALS AND ENERGY. - : Elsevier. - 2352-1791. ; 12, s. 569-574
-
Journal article (peer-reviewed)abstract
- Remobilization is one of the most prominent unresolved fusion dust-relevant issues, strongly related to the lifetime of dust in plasma-wetted regions, the survivability of dust on hot plasma-facing surfaces and the formation of dust accumulation sites. A systematic cross-machine study has been initiated to investigate the remobilization of tungsten micron-size dust from tungsten surfaces implementing a newly developed technique based on controlled pre-adhesion by gas dynamics methods. It has been utilized in a number of devices and has provided new insights on remobilization under steady-state and transient conditions. The experiments are interpreted with contact mechanics theory and heat conduction models.
|
|
6. |
- Stefániková, Estera, et al.
(author)
-
Fitting of the Thomson scattering density and temperature profiles on the COMPASS tokamak
- 2016
-
In: Review of Scientific Instruments. - : American Institute of Physics (AIP). - 0034-6748 .- 1089-7623. ; 87:11
-
Journal article (peer-reviewed)abstract
- A new technique for fitting the full radial profiles of electron density and temperature obtained by the Thomson scattering diagnostic in H-mode discharges on the COMPASS tokamak is described. The technique combines the conventionally used modified hyperbolic tangent function for the edge transport barrier (pedestal) fitting and a modification of a Gaussian function for fitting the core plasma. Low number of parameters of this combined function and their straightforward interpretability and controllability provide a robust method for obtaining physically reasonable profile fits. Deconvolution with the diagnostic instrument function is applied on the profile fit, taking into account the dependence on the actual magnetic configuration.
|
|
7. |
- Weinzettl, V., et al.
(author)
-
Dust remobilization experiments on the COMPASS tokamak
- 2017
-
In: Fusion engineering and design. - : ELSEVIER SCIENCE SA. - 0920-3796 .- 1873-7196. ; 124, s. 446-449
-
Journal article (peer-reviewed)abstract
- Dust remobilization is one of the not yet fully understood mechanisms connected to the prompt erosion of material from plasma facing surfaces in fusion devices. As a part of a newly initiated cross-machine study, dust remobilization experiments have been performed on the COMPASS tokamak. Tungsten samples with well-defined deposited tungsten dust grains, prepared using a recently developed controlled pre-adhesion method, have been exposed to ELMy H-mode discharges as well as L-mode discharges with forced disruptions. Here we report on the technical aspects of the experiment realization as well as on the experimental results of dust remobilization. The latter is discussed in the light of data from other machines and a physical interpretation is suggested for the observed spatial localization of the dust remobilization activity. Evidence of rearrangement of isolated dust into clusters and strings is also presented.
|
|