1. |
- Aad, G., et al.
(author)
-
Readiness of the ATLAS Tile Calorimeter for LHC collisions
- 2010
-
In: European Physical Journal C. Particles and Fields. - : Springer Science and Business Media LLC. - 1434-6044 .- 1434-6052. ; 70:4, s. 1193-1236
-
Journal article (peer-reviewed)abstract
- The Tile hadronic calorimeter of the ATLAS detector has undergone extensive testing in the experimental hall since its installation in late 2005. The readout, control and calibration systems have been fully operational since 2007 and the detector has successfully collected data from the LHC single beams in 2008 and first collisions in 2009. This paper gives an overview of the Tile Calorimeter performance as measured using random triggers, calibration data, data from cosmic ray muons and single beam data. The detector operation status, noise characteristics and performance of the calibration systems are presented, as well as the validation of the timing and energy calibration carried out with minimum ionising cosmic ray muons data. The calibration systems' precision is well below the design value of 1%. The determination of the global energy scale was performed with an uncertainty of 4%.
|
|
2. |
- Romanelli, F, et al.
(author)
-
Overview of the JET results
- 2011
-
In: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 51:9
-
Journal article (peer-reviewed)abstract
- Since the last IAEA Conference JET has been in operation for one year with a programmatic focus on the qualification of ITER operating scenarios, the consolidation of ITER design choices and preparation for plasma operation with the ITER-like wall presently being installed in JET. Good progress has been achieved, including stationary ELMy H-mode operation at 4.5 MA. The high confinement hybrid scenario has been extended to high triangularity, lower ρ*and to pulse lengths comparable to the resistive time. The steady-state scenario has also been extended to lower ρ*and ν*and optimized to simultaneously achieve, under stationary conditions, ITER-like values of all other relevant normalized parameters. A dedicated helium campaign has allowed key aspects of plasma control and H-mode operation for the ITER non-activated phase to be evaluated. Effective sawtooth control by fast ions has been demonstrated with3He minority ICRH, a scenario with negligible minority current drive. Edge localized mode (ELM) control studies using external n = 1 and n = 2 perturbation fields have found a resonance effect in ELM frequency for specific q95values. Complete ELM suppression has, however, not been observed, even with an edge Chirikov parameter larger than 1. Pellet ELM pacing has been demonstrated and the minimum pellet size needed to trigger an ELM has been estimated. For both natural and mitigated ELMs a broadening of the divertor ELM-wetted area with increasing ELM size has been found. In disruption studies with massive gas injection up to 50% of the thermal energy could be radiated before, and 20% during, the thermal quench. Halo currents could be reduced by 60% and, using argon/deuterium and neon/deuterium gas mixtures, runaway electron generation could be avoided. Most objectives of the ITER-like ICRH antenna have been demonstrated; matching with closely packed straps, ELM resilience, scattering matrix arc detection and operation at high power density (6.2 MW m-2) and antenna strap voltages (42 kV). Coupling measurements are in very good agreement with TOPICA modelling. © 2011 IAEA, Vienna.
|
|
3. |
- Abel, I, et al.
(author)
-
Overview of the JET results with the ITER-like wall
- 2013
-
In: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 53:10, s. 104002-
-
Journal article (peer-reviewed)abstract
- Following the completion in May 2011 of the shutdown for the installation of the beryllium wall and the tungsten divertor, the first set of JET campaigns have addressed the investigation of the retention properties and the development of operational scenarios with the new plasma-facing materials. The large reduction in the carbon content (more than a factor ten) led to a much lower Z(eff) (1.2-1.4) during L- and H-mode plasmas, and radiation during the burn-through phase of the plasma initiation with the consequence that breakdown failures are almost absent. Gas balance experiments have shown that the fuel retention rate with the new wall is substantially reduced with respect to the C wall. The re-establishment of the baseline H-mode and hybrid scenarios compatible with the new wall has required an optimization of the control of metallic impurity sources and heat loads. Stable type-I ELMy H-mode regimes with H-98,H-y2 close to 1 and beta(N) similar to 1.6 have been achieved using gas injection. ELM frequency is a key factor for the control of the metallic impurity accumulation. Pedestal temperatures tend to be lower with the new wall, leading to reduced confinement, but nitrogen seeding restores high pedestal temperatures and confinement. Compared with the carbon wall, major disruptions with the new wall show a lower radiated power and a slower current quench. The higher heat loads on Be wall plasma-facing components due to lower radiation made the routine use of massive gas injection for disruption mitigation essential.
|
|
4. |
- Bradnam, K. R., et al.
(author)
-
Assemblathon 2 : Evaluating de novo methods of genome assembly in three vertebrate species
- 2013
-
In: GigaScience. - : BioMed Central (BMC). - 2047-217X. ; 2:1
-
Journal article (peer-reviewed)abstract
- Background: The process of generating raw genome sequence data continues to become cheaper, faster, and more accurate. However, assembly of such data into high-quality, finished genome sequences remains challenging. Many genome assembly tools are available, but they differ greatly in terms of their performance (speed, scalability, hardware requirements, acceptance of newer read technologies) and in their final output (composition of assembled sequence). More importantly, it remains largely unclear how to best assess the quality of assembled genome sequences. The Assemblathon competitions are intended to assess current state-of-the-art methods in genome assembly. Results: In Assemblathon 2, we provided a variety of sequence data to be assembled for three vertebrate species (a bird, a fish, and snake). This resulted in a total of 43 submitted assemblies from 21 participating teams. We evaluated these assemblies using a combination of optical map data, Fosmid sequences, and several statistical methods. From over 100 different metrics, we chose ten key measures by which to assess the overall quality of the assemblies. Conclusions: Many current genome assemblers produced useful assemblies, containing a significant representation of their genes and overall genome structure. However, the high degree of variability between the entries suggests that there is still much room for improvement in the field of genome assembly and that approaches which work well in assembling the genome of one species may not necessarily work well for another.
|
|
5. |
|
|
6. |
- Caesar, C., et al.
(author)
-
Beyond the neutron drip line: The unbound oxygen isotopes O-25 and O-26
- 2013
-
In: Physical Review C - Nuclear Physics. - 2469-9985 .- 2469-9993 .- 0556-2813. ; 88:3
-
Journal article (peer-reviewed)abstract
- The very neutron-rich oxygen isotopes O-25 and O-26 are investigated experimentally and theoretically. The unbound states are populated in an experiment performed at the R3B-LAND setup at GSI via proton-knockout reactions from F-26 and F-27 at relativistic energies around 442 and 414 MeV/nucleon, respectively. From the kinematically complete measurement of the decay into O-24 plus one or two neutrons, the O-25 ground-state energy and width are determined, and upper limits for the O-26 ground-state energy and lifetime are extracted. In addition, the results provide indications for an excited state in O-26 at around 4 MeV. The experimental findings are compared to theoretical shell-model calculations based on chiral two- and three-nucleon (3N) forces, including for the first time residual 3N forces, which are shown to be amplified as valence neutrons are added.
|
|
7. |
- Altstadt, S.G., et al.
(author)
-
B-13,B-14(n,gamma) via Coulomb Dissociation for Nucleosynthesis towards the r-Process
- 2014
-
In: Nuclear Data Sheets. - : Elsevier BV. - 1095-9904 .- 0090-3752. ; 120, s. 197-200
-
Conference paper (peer-reviewed)abstract
- Radioactive beams of 14,15B produced by fragmentation of a primary 40Ar beam were directed onto a Pb target to investigate the neutron breakup within the Coulomb field. The experiment was performed at the LAND/R3B setup. Preliminary results for the Coulomb dissociation cross sections as well as for the astrophysically interesting inverse reactions, 13,14B(n,γ), are presented.
|
|
8. |
- Hudson, Lawrence N., et al.
(author)
-
The PREDICTS database : a global database of how local terrestrial biodiversity responds to human impacts
- 2014
-
In: Ecology and Evolution. - : Wiley. - 2045-7758. ; 4:24, s. 4701-4735
-
Journal article (peer-reviewed)abstract
- Biodiversity continues to decline in the face of increasing anthropogenic pressures such as habitat destruction, exploitation, pollution and introduction of alien species. Existing global databases of species' threat status or population time series are dominated by charismatic species. The collation of datasets with broad taxonomic and biogeographic extents, and that support computation of a range of biodiversity indicators, is necessary to enable better understanding of historical declines and to project - and avert - future declines. We describe and assess a new database of more than 1.6 million samples from 78 countries representing over 28,000 species, collated from existing spatial comparisons of local-scale biodiversity exposed to different intensities and types of anthropogenic pressures, from terrestrial sites around the world. The database contains measurements taken in 208 (of 814) ecoregions, 13 (of 14) biomes, 25 (of 35) biodiversity hotspots and 16 (of 17) megadiverse countries. The database contains more than 1% of the total number of all species described, and more than 1% of the described species within many taxonomic groups - including flowering plants, gymnosperms, birds, mammals, reptiles, amphibians, beetles, lepidopterans and hymenopterans. The dataset, which is still being added to, is therefore already considerably larger and more representative than those used by previous quantitative models of biodiversity trends and responses. The database is being assembled as part of the PREDICTS project (Projecting Responses of Ecological Diversity In Changing Terrestrial Systems - ). We make site-level summary data available alongside this article. The full database will be publicly available in 2015.
|
|
9. |
- Brawand, David, et al.
(author)
-
The genomic substrate for adaptive radiation in African cichlid fish
- 2014
-
In: Nature. - : Springer Science and Business Media LLC. - 0028-0836 .- 1476-4687. ; 513:7518, s. 375-381
-
Journal article (peer-reviewed)abstract
- Cichlid fishes are famous for large, diverse and replicated adaptive radiations in the Great Lakes of East Africa. To understand themolecular mechanisms underlying cichlid phenotypic diversity, we sequenced the genomes and transcriptomes of five lineages of African cichlids: the Nile tilapia (Oreochromis niloticus), an ancestral lineage with low diversity; and four members of the East African lineage: Neolamprologus brichardi/pulcher (older radiation, Lake Tanganyika), Metriaclima zebra (recent radiation, Lake Malawi), Pundamilia nyererei (very recent radiation, Lake Victoria), and Astatotilapia burtoni (riverine species around Lake Tanganyika). We found an excess of gene duplications in the East African lineage compared to tilapia and other teleosts, an abundance of non-coding element divergence, accelerated coding sequence evolution, expression divergence associated with transposable element insertions, and regulation by novel microRNAs. In addition, we analysed sequence data from sixty individuals representing six closely related species from Lake Victoria, and show genome-wide diversifying selection on coding and regulatory variants, some of which were recruited from ancient polymorphisms. We conclude that a number of molecular mechanisms shaped East African cichlid genomes, and that amassing of standing variation during periods of relaxed purifying selection may have been important in facilitating subsequent evolutionary diversification.
|
|
10. |
|
|
11. |
|
|
12. |
- Chomiuk, L., et al.
(author)
-
Binary orbits as the driver of gamma-ray emission and mass ejection in classical novae
- 2014
-
In: Nature. - : Springer Science and Business Media LLC. - 0028-0836 .- 1476-4687. ; 514:7522, s. 339-
-
Journal article (peer-reviewed)abstract
- Classical novae are the most common astrophysical thermonuclear explosions, occurring on the surfaces of white dwarf stars accreting gas from companions in binary star systems(1). Novae typically expel about 10(-4) solar masses of material at velocities exceeding 1,000 kilometres per second. However, the mechanism of mass ejection in novae is poorly understood, and could be dominated by the impulsive flash of thermonuclear energy(2), prolonged optically thick winds(3) or binary interaction with the nova envelope(4). Classical novae are now routinely detected at gigaelectronvolt gamma-ray wavelengths(5), suggesting that relativistic particles are accelerated by strong shocks in the ejecta. Here we report high-resolution radio imaging of the gamma-ray-emitting nova V959 Mon. We find that its ejecta were shaped by the motion of the binary system: some gas was expelled rapidly along the poles as a wind from the white dwarf, while denser material drifted out along the equatorial plane, propelled by orbital motion(6,7). At the interface between the equatorial and polar regions, we observe synchrotron emission indicative of shocks and relativistic particle acceleration, thereby pinpointing the location of gamma-ray production. Binary shaping of the nova ejecta and associated internal shocks are expected to be widespread among novae(8), explaining why many novae are gamma-ray emitters(5).
|
|
13. |
- Holmfeldt, Linda, et al.
(author)
-
The genomic landscape of hypodiploid acute lymphoblastic leukemia
- 2013
-
In: Nature Genetics. - : Springer Science and Business Media LLC. - 1546-1718 .- 1061-4036. ; 45:3, s. 242-252
-
Journal article (peer-reviewed)abstract
- The genetic basis of hypodiploid acute lymphoblastic leukemia (ALL), a subtype of ALL characterized by aneuploidy and poor outcome, is unknown. Genomic profiling of 124 hypodiploid ALL cases, including whole-genome and exome sequencing of 40 cases, identified two subtypes that differ in the severity of aneuploidy, transcriptional profiles and submicroscopic genetic alterations. Near-haploid ALL with 24-31 chromosomes harbor alterations targeting receptor tyrosine kinase signaling and Ras signaling (71%) and the lymphoid transcription factor gene IKZF3 (encoding AIOLOS; 13%). In contrast, low-hypodiploid ALL with 32-39 chromosomes are characterized by alterations in TP53 (91.2%) that are commonly present in nontumor cells, IKZF2 (encoding HELIOS; 53%) and RB1 (41%). Both near-haploid and low-hypodiploid leukemic cells show activation of Ras-signaling and phosphoinositide 3-kinase (PI3K)-signaling pathways and are sensitive to PI3K inhibitors, indicating that these drugs should be explored as a new therapeutic strategy for this aggressive form of leukemia.
|
|
14. |
- Lin, S., et al.
(author)
-
Direct synthesis without addition of acid of Al-SBA-15 with controllable porosity and high hydrothermal stability
- 2011
-
In: Microporous and Mesoporous Materials. - : Elsevier BV. - 1387-1811 .- 1873-3093. ; 142:2-3, s. 526-534
-
Journal article (peer-reviewed)abstract
- Using triblock copolymer Pluronic P123 as a structure-directing agent, water as solvent, tetraethyl orthosilicate (TEOS) and aluminium sulfate (Al(2)(SO(4))(3) 18H(2)O) as silica and aluminium sources, respectively, a series of Al-SBA-15 with well-ordered mesostructure has been hydrothermally synthesized up to high aging temperature through a one-step approach in an environmentally friendly mineral acid-free medium. The influence of some synthesis parameters such as Si/AI molar ratio (5-100), P123/Si molar ratio (0.0025-0.014) and aging temperature (363-443 K) on the properties of the resultant materials were investigated by powder X-ray diffraction (XRD), nitrogen adsorption-desorption at 77 K. transmission electron microscopy (TEM), and solid state (27)Al MAS NMR analyses. The textural properties of Al-SBA-15, such as specific surface area, pore volume and mesopore size, can be modified by simply adjusting those synthesis parameters. Solid state (27)Al MAS NMR results show direct evidence that aluminium is introduced onto the wall structure and located mainly at tetrahedrally coordinated sites. The structural ordering increases with increasing aluminium sulfate amount in the gel from Si/Al of 100-5, with the aluminium species playing an important role in the formation of the ordered mesostructure. The increase of aging temperature causes widening of mesopores, which are still highly ordered upon aging at 443 K. The procedure allows the formation, up to high reaction temperature, of aluminium incorporated SBA-15 exhibiting high structural ordering and hydrothermal stability.
|
|
15. |
- Monteserin, Maria, et al.
(author)
-
Multicomponent Interdiffusion and Self-Diffusion of the Cationic Poly{[9,9-bis(6 '-N,N,N-trimethylammonium)hexyl]fluorene-phenylene} Dibromide in a Dimethyl Sulfoxide plus Water Solution
- 2010
-
In: Journal of Chemical and Engineering Data. - : American Chemical Society (ACS). - 1520-5134 .- 0021-9568. ; 55:5, s. 1860-1866
-
Journal article (peer-reviewed)abstract
- The diffusion behavior of the conjugated polyelectrolyte poly{[9,9-bis(6'-N,N,N-trimethylammonium)hexyl]fluorene-phenylene) bromide (HTMA-PFP) with different molecular weights has been studied in dimethyl sulfoxide (DMSO) + water solutions. Samples of HTMA-PFP with various molecular weights were obtained by synthesis of poly[9,9-bis(6'-bromohexyl)fluorene-phenylene] via a Suzuki coupling reaction, characterized by size exclusion chromatography (SEC), and quaternized with trimethylamine. Multicomponent chemical interdiffusion coefficients (mutual diffusion coefficients) were determined for solutions of HTMA-PFP and DMSO in water using the Taylor dispersion method. The results suggest specific interactions between the DMSO and the polymer. In addition, these systems were studied by pulse-field gradient nuclear magnetic resonance spectroscopy (PFG-NMR), and the corresponding self-diffusion coefficients were obtained. These were modeled using the Kirkwood-Riseman model, and a good fit to the observed behavior was obtained using literature data for molecular dimensions.
|
|
16. |
- Moore, Derek G, et al.
(author)
-
During pregnancy, recreational drug-using women stop taking ecstasy (3,4-methylenedioxy-N-methylamphetamine) and reduce alcohol consumption, but continue to smoke tobacco and cannabis: initial findings from the Development and Infancy Study
- 2010
-
In: Journal of Psychopharmacology. - : SAGE Publications. - 0269-8811 .- 1461-7285. ; 24, s. 1403-1410
-
Journal article (peer-reviewed)abstract
- While recreational drug use in UK women is prevalent, to date there is little prospective data on patterns of drug use in recreational drug-using women immediately before and during pregnancy. A total of 121 participants from a wide range of backgrounds were recruited to take part in the longitudinal Development and Infancy Study (DAISY) study of prenatal drug use and outcomes. Eighty-six of the women were interviewed prospectively while pregnant and/or soon after their infant was born. Participants reported on use immediately before and during pregnancy and on use over their lifetime. Levels of lifetime drug use of the women recruited were high, with women reporting having used at least four different illegal drugs over their lifetime. Most users of cocaine, 3,4-methylenedioxy-N-methylamphetamine (MDMA) and other stimulants stopped using these by the second trimester and levels of use were low. However, in pregnancy, 64% of the sample continued to use alcohol, 46% tobacco and 48% cannabis. While the level of alcohol use reduced substantially, average tobacco and cannabis levels tended to be sustained at pre-pregnancy levels even into the third trimester (50 cigarettes and/or 11 joints per week). In sum, while the use of ‘party drugs’ and alcohol seems to reduce, levels of tobacco and cannabis use are likely to be sustained throughout pregnancy. The data provide polydrug profiles that can form the basis for the development of more realistic animal models.
|
|
17. |
|
|
18. |
- Ribeiro, D L, et al.
(author)
-
AKT and AMPK Activation after High-Fat and High-Glucose In Vitro Treatment of Prostate Epithelial Cells.
- 2014
-
In: Hormone and Metabolic Research. - : Georg Thieme Verlag KG. - 1439-4286 .- 0018-5043. ; 46:7, s. 471-476
-
Journal article (peer-reviewed)abstract
- Considering the increasing consumption of saturated fat and glucose in diets worldwide and its possible association to carcinogenesis, this investigation analysed the proliferation profile of nonmalignant human prostate epithelial cells after exposure to elevated levels of fat and glucose. PNT1A cells were cultured with palmitate (100 or 200 μM) and/or glucose (450 mg/dl) for 24 or 48 h. Treated cells were evaluated for viability test and cell proliferation (MTS assay). AKT and AMPK phosphorylation status were analysed by Western blotting. After 24 h of high-fat alone or associated with high-glucose treatment, there was an increase in AMPK and AKT activation associated to unchanged MTS-cell proliferation. Following 48 h of high-fat but not high-glucose alone, cells decreased AMPK activation and maintained elevated AKT levels. These data were associated to increased cell proliferation after further high-fat treatment. After longer high-fat exposure, MTS revealed that cells remained proliferating. High-glucose alone or associated to high-fat treatment was not able to increase cell proliferation and AKT activation. A high-fat medium containing 100 μM of palmitate stimulates proliferation in PNT1A cells by decreasing the activation of AMPK and increasing activation of AKT after longer exposure time. These findings improve the knowledge about the negative effect of high levels of this saturated fatty acid on proliferative disorders of prostate.
|
|
19. |
|
|
20. |
- Veljkovic, Milan, et al.
(author)
-
High-strength tower in steel for wind turbines (Histwin) : Final report
- 2012
-
Reports (peer-reviewed)abstract
- Innovative solutions for assembling joints of a tubular tower for wind turbines were studied and the project provides a background for design. This solution is simpler to produce and 80 % less expensive than traditional flange connection. Our feasibility study at the production plant indicates that the towers would be easy to assemble in situ. In addition to the direct cost savings due to the technical simplicity of the solution, the higher fatigue endurance than that of the flange connection is experimentally established. Further reduction of costs due to optimal use of higher-strength steel grades, especially in the bottom segments of the tower where the stiffening of the door opening is costly, is shown in the report. The total reduction of the costs for tower is estimated at about 10–15 % compared to the traditional tower. The project objectives are achieved in following sequences. • Experimental activities of the friction connection: small-scale tests to establish resistance of the friction connection for a variety of faying surfaces and bolt types, accompanying testing to ensure realistic input data for FEA, long-term testing to establish loss of pretension forces during the lifetime and fatigue tests.• Bending test of the friction and flange connection in a down-scaled tower. • Feasibility of production of the tower segments in the laboratory and at the production plant. • Monitoring of the existing tower to access a stress variation during the operation. • FEA analysis of experimental results and a complete case study of the monitored tower. Numerical examples for design of the friction connection are given for the sake of illustration and to encourage use of the new connection
|
|