1. |
- Weinstein, John N., et al.
(author)
-
The cancer genome atlas pan-cancer analysis project
- 2013
-
In: Nature Genetics. - : Springer Science and Business Media LLC. - 1546-1718 .- 1061-4036. ; 45:10, s. 1113-1120
-
Research review (peer-reviewed)abstract
- The Cancer Genome Atlas (TCGA) Research Network has profiled and analyzed large numbers of human tumors to discover molecular aberrations at the DNA, RNA, protein and epigenetic levels. The resulting rich data provide a major opportunity to develop an integrated picture of commonalities, differences and emergent themes across tumor lineages. The Pan-Cancer initiative compares the first 12 tumor types profiled by TCGA. Analysis of the molecular aberrations and their functional roles across tumor types will teach us how to extend therapies effective in one cancer type to others with a similar genomic profile. © 2013 Nature America, Inc. All rights reserved.
|
|
2. |
- Lindblad-Toh, Kerstin, et al.
(author)
-
Genome sequence, comparative analysis and haplotype structure of the domestic dog.
- 2005
-
In: Nature. - : Springer Science and Business Media LLC. - 1476-4687 .- 0028-0836. ; 438:7069, s. 803-19
-
Journal article (peer-reviewed)abstract
- Here we report a high-quality draft genome sequence of the domestic dog (Canis familiaris), together with a dense map of single nucleotide polymorphisms (SNPs) across breeds. The dog is of particular interest because it provides important evolutionary information and because existing breeds show great phenotypic diversity for morphological, physiological and behavioural traits. We use sequence comparison with the primate and rodent lineages to shed light on the structure and evolution of genomes and genes. Notably, the majority of the most highly conserved non-coding sequences in mammalian genomes are clustered near a small subset of genes with important roles in development. Analysis of SNPs reveals long-range haplotypes across the entire dog genome, and defines the nature of genetic diversity within and across breeds. The current SNP map now makes it possible for genome-wide association studies to identify genes responsible for diseases and traits, with important consequences for human and companion animal health.
|
|
3. |
- Wang, Zhaoming, et al.
(author)
-
Imputation and subset-based association analysis across different cancer types identifies multiple independent risk loci in the TERT-CLPTM1L region on chromosome 5p15.33
- 2014
-
In: Human Molecular Genetics. - : Oxford University Press (OUP). - 0964-6906 .- 1460-2083. ; 23:24, s. 6616-6633
-
Journal article (peer-reviewed)abstract
- Genome-wide association studies (GWAS) have mapped risk alleles for at least 10 distinct cancers to a small region of 63 000 bp on chromosome 5p15.33. This region harbors the TERT and CLPTM1L genes; the former encodes the catalytic subunit of telomerase reverse transcriptase and the latter may play a role in apoptosis. To investigate further the genetic architecture of common susceptibility alleles in this region, we conducted an agnostic subset-based meta-analysis (association analysis based on subsets) across six distinct cancers in 34 248 cases and 45 036 controls. Based on sequential conditional analysis, we identified as many as six independent risk loci marked by common single-nucleotide polymorphisms: five in the TERT gene (Region 1: rs7726159, P = 2.10 × 10(-39); Region 3: rs2853677, P = 3.30 × 10(-36) and PConditional = 2.36 × 10(-8); Region 4: rs2736098, P = 3.87 × 10(-12) and PConditional = 5.19 × 10(-6), Region 5: rs13172201, P = 0.041 and PConditional = 2.04 × 10(-6); and Region 6: rs10069690, P = 7.49 × 10(-15) and PConditional = 5.35 × 10(-7)) and one in the neighboring CLPTM1L gene (Region 2: rs451360; P = 1.90 × 10(-18) and PConditional = 7.06 × 10(-16)). Between three and five cancers mapped to each independent locus with both risk-enhancing and protective effects. Allele-specific effects on DNA methylation were seen for a subset of risk loci, indicating that methylation and subsequent effects on gene expression may contribute to the biology of risk variants on 5p15.33. Our results provide strong support for extensive pleiotropy across this region of 5p15.33, to an extent not previously observed in other cancer susceptibility loci.
|
|
4. |
- Barghouth, Mohammad, et al.
(author)
-
The structure of insulin granule core determines secretory capacity being reduced in type-2 diabetes
- 2022
-
Other publication (other academic/artistic)abstract
- Exocytosis in excitable cells is essential for their physiological functions. Although the exocytotic machinery controlling cellular secretion has been well investigated, the function of the vesicular cargo, i.e. secretory granular content remains obscure. Here we combine dSTORM imaging and single-domain insulin antibody, to dissect the in situ structure of insulin granule cores (IGCs) at nano level. We demonstrate that the size and shape of the IGCs can be regulated by the juxta-granular molecules Nucleobindin-2 and Enolase-1, that further contribute to the stimulated insulin secretion. IGCs located at the plasma membrane are larger than those in the cytosol. The IGCs size is decreased by ∼20% after glucose stimulation due to the release of the peripheral part of IGCs through incomplete granule fusion. Importantly, the reduction of the IGCs size is also observed in non-stimulatory pancreatic β-cells from diabetic db/db mice, Akita (Ins2+/-) mice and human Type-2 diabetic donors, in accordance with impaired secretion. These findings overall highlight the structure of exocytotic insulin cores as a novel modality amenable to targeting in the stimulated exocytosis in β-cells with impaired insulin secretion.Competing Interest StatementThe authors have declared no competing interest.
|
|
5. |
- Chen, Jiguang, et al.
(author)
-
FEA of helmet-head injury protection based on motorcycle accident reconstruction
- 2013
-
In: Proceedings - 2013 5th Conference on Measuring Technology and Mechatronics Automation, ICMTMA 2013. - 9780769549323 ; , s. 570-573
-
Conference paper (peer-reviewed)abstract
- Head impact usually causes fatalities of riders in motorcycle accidents. The use of helmet can protect head effectively and the study of head injury mechanism is useful in safety helmet design and head injury risk decrease. A real motorcycle-passenger car accident was reconstructed in order to simulate and analyze the motion, impact velocity, impact angle in the collision. In order to study the dynamic response of helmeted head during the accident impact processing, an effective helmet model was constructed and validated. Coupling with the finite element model of human head, the injury mechanism of head and relevant parameters of biomechanics were studied and the protection ability of helmet was analyzed. It was found that the presence of helmet reduces the probility of head injury.
|
|
6. |
|
|
7. |
- Chen, Xiaoping, et al.
(author)
-
Risk factors for the delayed viral clearance in COVID‐19 patients
- 2021
-
In: The Journal of Clinical Hypertension. - : John Wiley & Sons. - 1524-6175 .- 1751-7176. ; 23:8, s. 1483-1489
-
Journal article (peer-reviewed)abstract
- Comorbidities are important for the disease outcome of COVID-19, however, which underlying diseases that contribute the most to aggravate the conditions of COVID-19 patients are still unclear. Viral clearance is the most important laboratory test for defining the recovery of COVID-19 infections. To better understand which underlying diseases that are risk factors for delaying the viral clearance, we retrospectively analyzed 161 COVID-19 clinical cases in the Zhongnan Hospital of Wuhan University, Wuhan, China between January 5 and March 13, 2020. The demographic, clinical and laboratory data, as well as patient treatment records were collected. Univariable and multivariable analysis were performed to explore the association between delayed viral clearance and other factors by using logistic regression. Survival analyses by Kaplan-Meier and Cox regression modeling were employed to identify factors negatively influencing the viral clearance negatively. We found that hypertension and intravenous immunoglobulin adversely affected the time of viral RNA shedding. Hypertension was the most important risk factor to delay the SARS-CoV-2 virus clearance, however, the use of Angiotensin-Converting Enzyme Inhibitors(ACEI)/Angiotensin Receptor Blockers(ARB) did not shorten the time for virus clearance in these hypertensive patients’ virus clearance. We conclude that patients having hypertension and intravenous immunoglobulin may delay the viral clearance in COVID-19 patients.
|
|
8. |
- Dai, Bing, et al.
(author)
-
A study on throw distance of electric bicycle and cyclist based on accident reconstruction
- 2013
-
In: Proceedings - 2013 5th Conference on Measuring Technology and Mechatronics Automation, ICMTMA 2013. - 9780769549323 ; , s. 135-138
-
Conference paper (peer-reviewed)abstract
- This paper aims to determine the correlation of the throw distance of cyclist and electric bicycle in traffic accidents with throw vehicle impact speed. A total of 22 vehicle-electric bicycle accidents were sampled from IVAC database, China. The selected accidents were reconstructed by using PC-Crash and Madymo programs. The relationship between throw distance and vehicle impact velocity was analyzed by using logistic regression model The relationship curves were obtained based on the calculated parameters. With increasing of the vehicle impact velocity, an increase of throw distance was observed. When the vehicle impact velocity was above 30km/h, the throw distance of electric bicycle was larger than that of cyclist. By comparing of results from the PC-Crash and MADYMO simulations with observations from in-depth accident investigation, the feasibility of the reconstruction method and the validity of the numerical model were evaluated. This research could provide a basis for further study on the dynamic response and injury prevention of cyclist.
|
|
9. |
- Ge, Jing, et al.
(author)
-
Bringing light into the dark triplet space of molecular systems
- 2015
-
In: Physical Chemistry, Chemical Physics - PCCP. - : Royal Society of Chemistry (RSC). - 1463-9076 .- 1463-9084. ; 17:19, s. 13129-13136
-
Journal article (peer-reviewed)abstract
- A molecule or a molecular system always consists of excited states of different spin multiplicities. With conventional optical excitations, only the (bright) states with the same spin multiplicity of the ground state could be directly reached. How to reveal the dynamics of excited (dark) states remains the grand challenge in the topical fields of photochemistry, photophysics, and photobiology. For a singlet-triplet coupled molecular system, the (bright) singlet dynamics can be routinely examined by conventional femtosecond pump-probe spectroscopy. However, owing to the involvement of intrinsically fast decay channels such as intramolecular vibrational redistribution and internal conversion, it is very difficult, if not impossible, to single out the (dark) triplet dynamics. Herein, we develop a novel strategy that uses an ultrafast broadband white-light continuum as a excitation light source to enhance the probability of intersystem crossing, thus facilitating the population flow from the singlet space to the triplet space. With a set of femtosecond time-reversed pump-probe experiments, we report on a proof-of-concept molecular system (i.e., the malachite green molecule) that the pure triplet dynamics can be mapped out in real time through monitoring the modulated emission that occurs solely in the triplet space. Significant differences in excited-state dynamics between the singlet and triplet spaces have been observed. This newly developed approach may provide a useful tool for examining the elusive dark-state dynamics of molecular systems and also for exploring the mechanisms underlying molecular luminescence/photonics and solar light harvesting.
|
|
10. |
- Ji, Xinyu, et al.
(author)
-
Jet array impingement boiling in compact space for high heat flux cooling
- 2023
-
In: Applied Thermal Engineering. - : Elsevier BV. - 1359-4311. ; 219
-
Journal article (peer-reviewed)abstract
- To achieve high heat flux cooling, a distributed confined jet array impingement boiling device was designed and tested by using HFE-7100 as working fluid. The experimental study on the heat transfer characteristics was conducted on smooth silicon surface and micro-pin-finned surfaces with mass flux ranging from 760 ∼ 3040 kg/m2·s under atmospheric pressure and an inlet subcooling of 40 K. The results indicated that with the increase of the jet velocity, nucleate boiling was suppressed, and the forced convection heat transfer was enhanced. The heat transfer was greatly intensified on micro-pin-finned surfaces with a maximum increase of the heat transfer coefficient of 220 % due to the increase in specific surface area and the number of nucleation sites. Moreover, the critical heat flux (CHF) can reach 280 W/cm2. The mechanism of CHF improvement was analyzed. The two-phase flow structure within the confinement space and capillary wicking effect of the micro-pin-finned surface are superimposed, resulting in two distinct CHF mechanisms. A new correlation with a mean absolute error of 3.5 % for predicting the heat transfer coefficient of the jet impingement boiling was proposed by considering the effect of micro-pin–fin structure on heat transfer.
|
|
11. |
- Ji, Xinyu, et al.
(author)
-
Two-phase flow characteristics and visualization of distributed confined array jet boiling
- 2024
-
In: Case Studies in Thermal Engineering. - 2214-157X. ; 57
-
Journal article (peer-reviewed)abstract
- Confined array jet boiling can achieve high heat flux in a compact space and its flow resistance characteristics are critical to the design of cooling systems. The boiling images of distributed confined jet of HFE-7100 is recorded by a high-speed camera in this study. The effects of jet mass flux, jet height and surface structure of two-phase jet flow characteristics on micro-pin-finned surfaces are studied. A benefit from the distributed configuration of the jet array, in contrast to previous studies, is that the jet boiling pressure drop is independent of the heat flux, but only related to the jet mass flux. The effect of the surface structure on the pressure drop is negligible. Jet flow instability will be triggered by intermittently blockage of the jet inlet and outlet by large vapor masses in certain heated surfaces. Reducing the jet height can suppress two-phase flow instabilities while keeping the pressure drop almost constant and the CHF to slightly increase. The COP of distributed jet impingement boiling cooler proposed in this work can be up to 6 times higher than that of the conventional jet boiling cooler, and more than 2 times higher that of the microchannel heat sink.
|
|
12. |
- Li, Li, et al.
(author)
-
A study on motor-scooter accidents in China and Germany
- 2013
-
In: Proceedings - 2013 5th Conference on Measuring Technology and Mechatronics Automation, ICMTMA 2013. - 9780769549323 ; , s. 110-113
-
Conference paper (peer-reviewed)abstract
- The vehicle traffic accidents have been widely studied not only in the motorized countries but also in the motorizing countries, while in-depth study on motor-scooter accidents has not been adequately investigated. In this research the motor-scooter accident data from IVAC in Changsha of China were collected from in depth accident investigation, at the same time the accidents samples from GIDAS in Hannover Medical University from 2004 to 2010 were also picked out to study the injury mechanism on motor-scooter riders. By utilizing the statistical analysis and accident reconstruction method, the injury location and injury severity of the scooter riders are investigated, furthermore the collision type, collision speed on scooter to car accidents, impact areas on helmets for scooter riders, injury risk as a function of car collision speed are investigated. The research results can provide foundation and reference for the establishment on injury protection measures for scooter riders.
|
|
13. |
- Ma, Xiaoping, et al.
(author)
-
Application of Ti Microalloying in a Thin-Slab-Cast Medium-Carbon Steel
- 2021
-
In: Iron & Steel Technology. - : Association for Iron and Steel Technology. - 1547-0423. ; 18:7, s. 178-188
-
Journal article (peer-reviewed)abstract
- Addition of 0.035 wt.% Ti into a steel with 0.23 wt.% C and 1.3 wt.% Mn was designed to produce steels for axle housing application. The production of 11-mm-thick coils was carried out in a Direction Strip Production Complex strip mill. The present studies focus on structureproperties correlation of the steels as-rolled and after normalizing at 750°C. The precipitation, partial dissolution and re-precipitation behavior of TiC along with microstructure refinement in as-rolled steel and after normalizing are analyzed using electron microscopes. The results lay the foundation for application of Ti microalloying in heat-treated medium-carbon steels.
|
|
14. |
- Ma, Xiang, et al.
(author)
-
Flow boiling frictional pressure drop inside micro/mini-channels : A new general model and experimental investigation
- 2024
-
In: Applied Thermal Engineering. - 1359-4311. ; 247
-
Journal article (peer-reviewed)abstract
- In this study, a novel general model for flow boiling frictional pressure drop inside micro/mini-channels was proposed based on theoretical analysis and experimental evaluation. Experiments were conducted to obtained flow boiling pressure drop of deionized water, HFE7100 and R134a in micro-channels under various experimental conditions. Then, a wide database from 33 previous literatures consists 3854 experimental data points covering 11 different working fluids, e.g., carbon dioxide, new electronic fluorinated solutions, refrigerants and deionized water, among others, and the operation conditions were as following: system temperature of −40–90 ℃, saturated pressure of 101–3970 kPa, hydraulic diameter of 0.1–2.6 mm, liquid subcooling of 5–75 K, mass flux of 50–3000 kg/(m2·s), heat flux of 0–4000 kW/m2, liquid-only Reynolds number of 40–12,000, vapor quality of 0–1, and reduced pressure of 0.0045–0.5380 in the database. Both the Reynolds numbers of vapor and liquid were calculated using the hydraulic diameter and vapor quality. The present data points were evaluated by 20 existing classical models (including the homogeneous and separated flow ones) for the flow boiling frictional pressure drop. However, the predictions of these models for the present data points had low accuracy, especially for the subcooled points at low vapor quality. Therefore, a more accurate prediction model was developed based on the present database by distinguishing the subcooled and saturated boiling. This novel prediction model can predict 75.4 % and 89.7 % of data points within ±30 % and ±50 % error bands, its mean absolute percent error (MAPE) is 19.23 %, which shows good predictive ability. Besides, the reliability of the new model was also further verified with our experimental results.
|
|
15. |
- Qiu, Yizhi, et al.
(author)
-
Proximity to oilseed rape fields affects plant pollination and pollinator-mediated selection on a co-flowering plant on the Tibetan Plateau
- 2023
-
In: Evolutionary Applications. - : Wiley. - 1752-4571. ; 16:4, s. 814-823
-
Journal article (peer-reviewed)abstract
- The ecological effects of mass-flowering crops on pollinator abundance and species richness of neighbouring habitats are well established, yet the potential evolutionary consequences remain unclear. We studied effects of proximity to a mass-flowering crop on the pollination of local co-flowering plants and on patterns of natural selection on a pollination-generalised plant on the Tibetan Plateau. We recorded pollinator visitation rates and community composition at different distances (near vs. far) to oilseed rape (Brassica napus) fields in two habitat types and quantified pollinator-mediated selection on attractive traits of Trollius ranunculoides. The proximity to oilseed rape increased pollinator visitation in neighbouring alpine meadows and changed pollinator composition in neighbouring shrub meadows. Trollius ranunculoides in the alpine meadow near oilseed rape received three times more pollinator visits (mainly bees) and consequently had a 16.5% increase in seed set but also received slightly more heterospecific pollen per stigma. In contrast, pollinator visitation to T. ranunculoides in the shrub meadow near oilseed rape was three times lower (mainly flies), leading to a 10.7% lower seed despite no effect on pollen deposition. The proximity to the oilseed rape field intensified pollinator-mediated selection on flower size and weakened selection on flower height of T. ranunculoides in the alpine meadow but did not affect phenotypic selection on either trait in the shrub meadow. Our study highlights context-dependent variation in plant–pollinator interactions close to mass-flowering oilseed rape, suggesting potential effects on the evolution of flower traits of native plants through altered pollinator-mediated selection. However, context dependence may make these effects difficult to predict.
|
|
16. |
- Wang, Xuechao, et al.
(author)
-
A study on kinematics of electric-bicycle-rider in car collisions based on traffic accident data
- 2013
-
In: Proceedings - 2013 5th Conference on Measuring Technology and Mechatronics Automation, ICMTMA 2013. - 9780769549323 ; , s. 106-109
-
Conference paper (peer-reviewed)abstract
- The impact scenarios, impact velocity were investigated based on 224 car-electric bicycle collision cases in IVAC (In-depth Investigation of Car Accident in Changsha) database. Cars were classified into three types: sedan, SUV and one box. According to analysis of traffic accident data, car-electric bicycle collision models were built up by using MADYMO. In order to analyze the kinematics of electric-bicycle-riders, this paper conducted a series of numerical experiments by changing the types of cars. Results show that the most prominent impact modes were frontal impact (54%) and side impact (33%), rider's head tend to strike sedan at upper part of the windscreen', 'SUV at the front end of bonnet, and one box at lower part of the windscreen, The peak values of head's and pelvis' acceleration were higher and occurred earlier when a SUV or one box impacted with electric bicycle.
|
|
17. |
- Yang, Runkuan, et al.
(author)
-
Ethyl pyruvate reduces liver injury at early phase but impairs regeneration at late phase in acetaminophen overdose
- 2012
-
In: Critical Care. - : Springer Science and Business Media LLC. - 1364-8535 .- 1466-609X. ; 16:1, s. R9-
-
Journal article (peer-reviewed)abstract
- INTRODUCTION:Inflammation may critically affect mechanisms of liver injury in acetaminophen (APAP) hepatotoxicity. Kupffer cells (KC) play important roles in inflammation, and KC depletion confers protection at early time points after APAP treatment but can lead to more severe injury at a later time point. It is possible that some inflammatory factors might contribute to liver damage at an early injurious phase but facilitate liver regeneration at a late time point. Therefore, we tested this hypothesis by using ethyl pyruvate (EP), an anti-inflammatory agent, to treat APAP overdose for 24-48 hours.METHODS:C57BL/6 male mice were intraperitoneally injected with a single dose of APAP (350 mg/kg dissolved in 1 mL sterile saline). Following 2 hours of APAP challenge, the mice were given 0.5 mL EP (40 mg/kg) or saline treatment every 8 hours for a total of 24 or 48 hours.RESULTS:Twenty-four hours after APAP challenge, compared to the saline-treated group, EP treatment significantly lowered serum transaminases (ALT/AST) and reduced liver injury seen in histopathology; however, at the 48-hour time point, compared to the saline therapy, EP therapy impaired hepatocyte regeneration and increased serum AST; this late detrimental effect was associated with reduced serum TNF-α concentration and decreased expression of cell cycle protein cyclin D1, two important factors in liver regeneration.CONCLUSIONS:Inflammation likely contributes to liver damage at an early injurious phase but improves hepatocyte regeneration at a late time point, and prolonged anti-inflammation therapy at a late phase is not beneficial.
|
|
18. |
- Yang, Runkuan, et al.
(author)
-
HMGB1 and Extracellular Histones Significantly Contribute to Systemic Inflammation and Multiple Organ Failure in Acute Liver Failure
- 2017
-
In: Mediators of Inflammation. - : HINDAWI LTD. - 0962-9351 .- 1466-1861.
-
Research review (peer-reviewed)abstract
- Acute liver failure (ALF) is the culmination of severe liver cell injury from a variety of causes. ALF occurs when the extent of hepatocyte death exceeds the hepatic regenerative capacity. ALF has a high mortality that is associated with multiple organ failure (MOF) and sepsis; however, the underlying mechanisms are still not clear. Emerging evidence shows that ALF patients/animals have high concentrations of circulating HMGB1, which can contribute to multiple organ injuries and mediate gut bacterial translocation (BT). BT triggers/induces systemic inflammatory responses syndrome (SIRS), which can lead to MOF in ALF. Blockade of HMGB1 significantly decreases BT and improves hepatocyte regeneration in experimental acute fatal liver injury. Therefore, HMGB1 seems to be an important factor that links BT and systemic inflammation in ALF. ALF patients/animals also have high levels of circulating histones, which might be the major mediators of systemic inflammation in patients with ALF. Extracellular histones kill endothelial cells and elicit immunostimulatory effect to induce multiple organ injuries. Neutralization of histones can attenuate acute liver, lung, and brain injuries. In conclusion, HMGB1 and histones play a significant role in inducing systemic inflammation and MOF in ALF.
|
|
19. |
- Yang, Runkuan, et al.
(author)
-
HMGB1 neutralization is associated with bacterial translocation during acetaminophen hepatotoxicity
- 2014
-
In: BMC Gastroenterology. - 1471-230X. ; 14, s. 66-
-
Journal article (peer-reviewed)abstract
- Background: Acetaminophen (APAP) hepatotoxicity is associated with a high rate of gram- negative enteric bacterial infection; however, the underlying mechanism is still unknown. APAP overdose induces massive hepatocyte necrosis, necrotic tissue releases high mobility group B1 (HMGB1) and exogenous HMGB1 is able to induce gut bacterial translocation (BT) in normal mice; therefore, it is possible that HMGB1 mediates gut BT in APAP hepatotoxicity. This study aims to test this hypothesis by using anti-HMGB1 neutralizing antibody to treat APAP overdose for 24-48 hours. Methods: Male C57BL/6 mice were intraperitoneally (i.p.) injected with a single dose of APAP (350 mg/ kg dissolved in 1 mL sterile saline). 2 hrs after APAP injection, the APAP challenged mice were randomized to receive treatment with either anti-HMGB1 antibody (400 mu g per dose) or non-immune (sham) IgG every 24 h for a total of 2 doses. Results: 24 and 48 hrs after APAP challenge, anti-HMGB1 treatment instead of sham IgG therapy significantly decreased serum HMGB1 concentrations and reduced BT by 85%; serum HMGB1 levels were positively correlated with the amount of BT; anti-HMGB1 therapy decreased hepatic BT at 48 h, which was associated with better recovered liver structure and better restored hepatic immune system that was shown by enhanced hepatic mRNA expression of TNF-alpha, IL-6 and extensive proliferation of inflammatory and reticuloendothelial cells; however, anti- HMGB1 treatment did not decrease gut mucosal permeability as compared to the sham IgG therapy at either 24 or 48 hrs. Conclusion: HMGB1 neutralization is associated with bacterial translocation during APAP hepatotoxicity.
|
|
20. |
- Yu, Yang, et al.
(author)
-
Effect of the heating rate on the thermal explosion behavior and oxidation resistance of 3D-structure porous NiAl intermetallic
- 2022
-
In: Materials Characterization. - : Elsevier BV. - 1044-5803. ; 190
-
Journal article (peer-reviewed)abstract
- Porous NiAl intermetallic compounds demonstrate great potential in various applications by their high porosity and excellent oxidation resistance. However, to obtain a controllable NiAl intermetallic structure by tuning different process parameters remains unclear. In this work, porous NiAl intermetallic compounds were fabricated by economic and energy-saving thermal explosion (TE) reaction. The relationship between microstructure and process parameters was revealed using three-dimensional X-ray microscopy (3D-XRM) with high resolution and non-destructive characteristics. The geometrical features and quantitative statistics of the porous NiAl obtained at different heating rates (2, 10, 20 °C min−1) were compared. The result of the closed porosity calculation showed that a lower heating rate (2 °C min−1) promoted the Kirkendall reaction between Ni and Al, resulting in a high closed porosity (5.25%). However, at a higher heating rate (20 °C min−1), a homogeneous NiAl phase was observed using the threshold segmentation method, indicating uniform and complete TE reaction can be achieved at a high heating rate. The result of the 3D fluid simulation showed that the sample heated at 10 °C min−1 had the highest permeability (2434.6 md). In this study, we systematically investigated the relationship between the heating rates and properties of the porous NiAl intermetallic, including the phase composition, porosity, exothermic mechanism, oxidation resistance, and compression resistance. Our work provides constructive directions for designing and tailoring the performance of porous NiAl intermetallic compounds.
|
|
21. |
- Yu, Yang, et al.
(author)
-
Research of TE behaviour and compression property of porous Ni–Al–Cr intermetallic compounds in the β phase region
- 2023
-
In: Journal of Materials Research and Technology. - : Elsevier Editora Ltda. - 2238-7854 .- 2214-0697. ; 25, s. 3537-3550
-
Journal article (peer-reviewed)abstract
- Ni–Al–Cr alloys in the β phase (B2–NiAl) region exhibit remarkable stability and mechanical property. Through thermal explosion (TE) reaction, Ni–Al–Cr intermetallic compounds with high porosity can be obtained. In this study, the focus lies on analyzing the macroscopic morphology, microstructure, phase distribution, TE behaviour, and the mechanical property of porous Ni–Al–Cr in the β phase region. Following the TE reaction, the Al-rich sintered product demonstrates a uniform phase composition and high porosity, reaching 44.39%. The vigorous TE reaction promotes the formation of interconnected pores, while the high porosity structure compromises the mechanical properties of the sample. Conversely, the Al-poor sintered product, due to a moderate TE reaction and low porosity structure, maintains its complete morphology and exhibits excellent compression resistance (yield stress reaching 538 MPa). This study offers valuable insights for the fabrication of porous Ni–Al–Cr materials with exceptional structure and performance.
|
|
22. |
- Zhang, Qun, et al.
(author)
-
The Realistic Domain Structure of As-Synthesized Graphene Oxide from Ultrafast Spectroscopy
- 2013
-
In: Journal of the American Chemical Society. - : American Chemical Society (ACS). - 0002-7863 .- 1520-5126. ; 135:33, s. 12468-12474
-
Journal article (peer-reviewed)abstract
- Graphene oxide (GO) is an attractive alternative for large-scale production of graphene, but its general structure is still under debate due to its complicated nonstoichiometric nature. Here we perform a set of femto-second pump-probe experiments on as-synthesized GO to extrapolate structural information in situ. Remarkably, it is observed that, in these highly oxidized GO samples, the ultrafast graphene-like dynamics intrinsic to pristine graphene is completely dominant over a wide energy region and can be modified by the localized impurity states and the electron-phonon coupling under certain conditions. These observations, combined with the X-ray photoelectron spectroscopy analysis and control experiments, lead to an important conclusion that GO consists of two types of domain, namely the carbon-rich graphene-like domain and the oxygen-rich domain. This study creates a new understanding of the realistic domain structure and properties of as-synthesized GO, offering useful guidance for future applications based on chemically modified/functionalized graphenes.
|
|
23. |
- Zody, Michael, 1968-, et al.
(author)
-
Analysis of the DNA sequence and duplication history of human chromosome 15
- 2006
-
In: Nature. - : Springer Science and Business Media LLC. - 0028-0836 .- 1476-4687. ; 440:7084, s. 671-675
-
Journal article (peer-reviewed)abstract
- Here we present a finished sequence of human chromosome 15, together with a high-quality gene catalogue. As chromosome 15 is one of seven human chromosomes with a high rate of segmental duplication, we have carried out a detailed analysis of the duplication structure of the chromosome. Segmental duplication in chromosome 15 are largely clustered in two regions, on proximal and distal 15q; the proximal region is notable because recombination among the segmental duplications can result in deletions causing Prader-Willi and Angelman syndromes. Sequence analysis shows that the proximal and distal regions of 15q share extensive ancient similarity. Using a simple approach, we have been able to reconstruct many of the events by which the current duplication structure arose. We find that most of the intrachromosomal duplications seem to share a common ancestry. Finally, we demonstrate that some remaining gaps in the genome sequence are probably due to structural polymorphisms between haplotypes; this may explain a significant fraction of the gaps remaining in the human genome.
|
|
24. |
- Zody, Michael, 1968-, et al.
(author)
-
DNA sequence of human chromosome 17 and analysis of rearrangement in the human lineage
- 2006
-
In: Nature. - : Springer Science and Business Media LLC. - 0028-0836 .- 1476-4687. ; 440:7087, s. 1045-1049
-
Journal article (peer-reviewed)abstract
- Chromosome 17 is unusual among the human chromosomes in many respects. It is the largest human autosome with orthology to only a single mouse chromosome, mapping entirely to the distal half of mouse chromosome 11. Chromosome 17 is rich in protein-coding genes, having the second highest gene density in the genome. It is also enriched in segmental duplications, ranking third in density among the autosomes. Here we report a finished sequence for human chromosome 17, as well as a structural comparison with the finished sequence for mouse chromosome 11, the first finished mouse chromosome. Comparison of the orthologous regions reveals striking differences. In contrast to the typical pattern seen in mammalian evolution, the human sequence has undergone extensive intrachromosomal rearrangement, whereas the mouse sequence has been remarkably stable. Moreover, although the human sequence has a high density of segmental duplication, the mouse sequence has a very low density. Notably, these segmental duplications correspond closely to the sites of structural rearrangement, demonstrating a link between duplication and rearrangement. Examination of the main classes of duplicated segments provides insight into the dynamics underlying expansion of chromosome-specific, low-copy repeats in the human genome.
|
|