1. |
- Ajjan, Fátima, 1986-, et al.
(author)
-
Doped Conjugated Polymer Enclosing a Redox Polymer : Wiring Polyquinones with Poly(3,4‐Ethylenedioxythiophene)
- 2020
-
In: Advanced Energy & Sustainability Research. - : John Wiley & Sons. - 2699-9412. ; 1:2
-
Journal article (peer-reviewed)abstract
- The mass implementation of renewable energies is limited by the absence of efficient and affordable technology to store electrical energy. Thus, the development of new materials is needed to improve the performance of actual devices such as batteries or supercapacitors. Herein, the facile consecutive chemically oxidative polymerization of poly(1-amino-5-chloroanthraquinone) (PACA) and poly(3,4-ethylenedioxythiophene (PEDOT) resulting in a water dispersible material PACA-PEDOT is shown. The water-based slurry made of PACA-PEDOT nanoparticles can be processed as film coated in ambient atmosphere, a critical feature for scaling up the electrode manufacturing. The novel redox polymer electrode is a nanocomposite that withstands rapid charging (16 A g−1) and delivers high power (5000 W kg−1). At lower current density its storage capacity is high (198 mAh g−1) and displays improved cycling stability (60% after 5000 cycles). Its great electrochemical performance results from the combination of the redox reversibility of the quinone groups in PACA that allows a high amount of charge storage via Faradaic reactions and the high electronic conductivity of PEDOT to access to the redox-active sites. These promising results demonstrate the potential of PACA-PEDOT to make easily organic electrodes from a water-coating process, without toxic metals, and operating in non-flammable aqueous electrolyte for large scale pseudocapacitors.
|
|
2. |
- Andersson Ersman, Peter, et al.
(author)
-
Reflective and Complementary Transmissive All-Printed Electrochromic Displays Based on Prussian Blue
- 2023
-
In: Advanced Engineering Materials. - : John Wiley and Sons Inc. - 1438-1656 .- 1527-2648. ; 25:6
-
Journal article (peer-reviewed)abstract
- By combining the electrochromic (EC) properties of Prussian blue (PB) and poly(3,4-ethylenedioxythiophene):polystyrene sulfonate (PEDOT:PSS), complementary EC displays manufactured by slot-die coating and screen printing on flexible plastic substrates are reported. Various display designs have been realized, resulting in displays operating in either transmissive or reflective mode. For the transmission mode displays, the color contrast is enhanced by the complementary switching of the two EC electrodes PB and PEDOT:PSS. Both electrodes are either exhibiting a concurrent colorless or blue appearance. For the displays operating in reflection mode, a white opaque electrolyte is used in conjunction with the EC properties of PB, resulting in a display device switching between a fully white state and a blue-colored state. The developments of the different device architectures, that either operate in reflection or transmission mode, demonstrate a scalable manufacturing approach of all-printed EC displays that may be used in a large variety of Internet of Things applications. © 2022 The Authors.
|
|
3. |
- Brooke, Robert, 1989-, et al.
(author)
-
All-Printed Electrochromic Stickers
- 2023
-
In: Macromolecular materials and engineering. - : John Wiley and Sons Inc. - 1438-7492 .- 1439-2054. ; 308:9
-
Journal article (peer-reviewed)abstract
- Displays are one of the most mature technologies in the field of printed electronics. Their ability to be manufactured in large quantities and at low cost has led to their recent uptake into the consumer market. Within this article this technology is extended to electrochromic display stickers. This is achieved using a recent reverse display architecture screen printed on textile and paper sticker substrates. The electrochromic stickers are comparable to plastic control substrates and show little performance difference even when adhered to curved surfaces. The electrochromic display technology is extended to sticker labels for authentication applications by patterning either the dielectric or the graphical layer. A proof-of-concept prototype emulating a wax seal on an envelope is presented to show that other colors can be implemented in this technology. © 2023 The Authors.
|
|
4. |
- Brooke, Robert, 1989-, et al.
(author)
-
All-Printed Multilayers and Blends of Poly(dioxythiophene) Derivatives Patterned into Flexible Electrochromic Displays
- 2023
-
In: Macromolecular materials and engineering. - : John Wiley and Sons Inc. - 1438-7492 .- 1439-2054. ; 308:2
-
Journal article (peer-reviewed)abstract
- Low-cost, flexible and thin display technology is becoming an interesting field of research as it can accompany the wide range of sensors being developed. Here, the synthesis of poly(dimethylpropylene-dioxythiophene) (PProDOT-Me2) by combining vapor phase polymerization and screen printing is presented. A multilayer architecture using poly(3,4-ethylenedioxythiophene) (PEDOT) and PProDOT-Me2 to allow for electrochromic switching of PProDOT-Me2, thereby eliminating the need for a supporting transparent conductive (metal oxide) layer is introduced. Furthermore, the technology is adapted to a blended architecture, which removes the additional processing steps and results in improved color contrast (∆E* > 25). This blend architecture is extended to other conductive polymers, such as PEDOT and polypyrrole (PPy), to highlight the ability of the technique to adjust the color of all-printed electrochromic displays. As a result, a green color is obtained when combining the blue and yellow states of PEDOT and PPy, respectively. This technology has the potential to pave the way for all-printed multicolored electrochromic displays for further utilization in printed electronic systems in various Internet of Things applications. © 2022 The Authors.
|
|
5. |
- Brooke, Robert, 1989-, et al.
(author)
-
Electrochromic Displays Manufactured by a Combination of Vapor Phase Polymerization and Screen Printing
- 2022
-
In: Advanced Materials Technologies. - : John Wiley & Sons. - 2365-709X. ; 7:8
-
Journal article (peer-reviewed)abstract
- Smart label technology such as indicators is a growing field due to society's demand for Internet of Things devices. New materials and technologies are continuously being discovered and developed in order to provide better resolution, better performance, or more environmentally friendly devices. Within this report, screen printing technology is combined with vapor phase polymerization to synthesize three conductive polymers; poly(3,4-ethylenedioxythiophene) (PEDOT), polypyrrole (PPy), and polythiophene (PTh). The conductive polymers are created in micrometer resolution and investigated for their electrochromic properties. PEDOT and PPy samples are combined into printed, laminated, transmissive electrochromic displays. The technology is further advanced to establish separate PEDOT, PPy, and PTh all-printed electrochromic displays using several screen printed layers. The PEDOT displays show improved color retention as compared to displays created with commercially available PEDOT:poly(styrene sulfonate) (PSS) with comparable contrast and switching behavior. All-printed PPy and PTh electrochromic displays with impressive electrochromic behavior are demonstrated. More complex patterns of 7-segment displays are created, thereby highlighting flexibility and individually switched sections of the conductive polymers. This research extends the screen printing and vapor phase polymerization combination to other conductive polymers and the potential commercialization of multicolor electrochromic displays that has been otherwise dominated by monochromatic PEDOT:PSS.
|
|
6. |
- Brooke, Robert, 1989-, et al.
(author)
-
Paper Electronics Utilizing Screen Printing and Vapor Phase Polymerization
- 2023
-
In: Advanced Sustainable Systems. - : John Wiley and Sons Inc. - 2366-7486. ; 7:7
-
Journal article (peer-reviewed)abstract
- The rise of paper electronics has been accelerated due to the public push for sustainability. Electronic waste can potentially be avoided if certain materials in electronic components can be substituted for greener alternatives such as paper. Within this report, it is demonstrated that conductive polymers poly(3,4-ethylenedoxythiophene) (PEDOT), polypyrrole, and polythiophene, can be synthesized by screen printing combined with vapor phase polymerization on paper substrates and further incorporated into functional electronic components. High patterning resolution (100 µm) is achieved for all conductive polymers, with PEDOT showing impressive sheet resistance values. PEDOT is incorporated as conductive circuitry and as the active material in all-printed electrochromic displays. The conductive polymer circuits allow for functional light emitting diodes, while the electrochromic displays are comparable to commercial displays utilizing PEDOT on plastic substrates.
|
|
7. |
- Chen, Shangzhi, et al.
(author)
-
On the anomalous optical conductivity dispersion of electrically conducting polymers : Ultra-wide spectral range ellipsometry combined with a Drude-Lorentz model
- 2019
-
In: Journal of Materials Chemistry C. - : Royal Society of Chemistry. - 2050-7526 .- 2050-7534. ; 7:15, s. 4350-4362
-
Journal article (peer-reviewed)abstract
- Electrically conducting polymers (ECPs) are becoming increasingly important in areas such as optoelectronics, biomedical devices, and energy systems. Still, their detailed charge transport properties produce an anomalous optical conductivity dispersion that is not yet fully understood in terms of physical model equations for the broad range optical response. Several modifications to the classical Drude model have been proposed to account for a strong non-Drude behavior from terahertz (THz) to infrared (IR) ranges, typically by implementing negative amplitude oscillator functions to the model dielectric function that effectively reduce the conductivity in those ranges. Here we present an alternative description that modifies the Drude model via addition of positive-amplitude Lorentz oscillator functions. We evaluate this so-called Drude-Lorentz (DL) model based on the first ultra-wide spectral range ellipsometry study of ECPs, spanning over four orders of magnitude: from 0.41 meV in the THz range to 5.90 eV in the ultraviolet range, using thin films of poly(3,4-ethylenedioxythiophene):tosylate (PEDOT:Tos) as a model system. The model could accurately fit the experimental data in the whole ultrawide spectral range and provide the complex anisotropic optical conductivity of the material. Examining the resonance frequencies and widths of the Lorentz oscillators reveals that both spectrally narrow vibrational resonances and broader resonances due to localization processes contribute significantly to the deviation from the Drude optical conductivity dispersion. As verified by independent electrical measurements, the DL model accurately determines the electrical properties of the thin film, including DC conductivity, charge density, and (anisotropic) mobility. The ellipsometric method combined with the DL model may thereby become an effective and reliable tool in determining both optical and electrical properties of ECPs, indicating its future potential as a contact-free alternative to traditional electrical characterization.
|
|
8. |
- Chen, Shangzhi, et al.
(author)
-
Unraveling vertical inhomogeneity in vapour phase polymerized PEDOT:Tos films
- 2020
-
In: Journal of Materials Chemistry A. - : Royal Society of Chemistry. - 2050-7488 .- 2050-7496. ; 8, s. 18726-18734
-
Journal article (peer-reviewed)abstract
- The conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) forms a promising alternative to conventional inorganic conductors, where deposition of thin films via vapour phase polymerization (VPP) has gained particular interest owing to high electrical conductivity within the plane of the film. The conductivity perpendicular to the film is typically much lower, which may be related not only to preferential alignment of PEDOT crystallites but also to vertical stratification across the film. In this study, we reveal non-linear vertical microstructural variations across VPP PEDOT:Tos thin films, as well as significant differences in doping level between the top and bottom surfaces. The results are consistent with a VPP mechanism based on diffusion-limited transport of polymerization precursors. Conducting polymer films with vertical inhomogeneity may find applications in gradient-index optics, functionally graded thermoelectrics, and optoelectronic devices requiring gradient doping.
|
|
9. |
- Chen, Shangzhi, et al.
(author)
-
Unraveling vertical inhomogeneity in vapour phase polymerized PEDOT:Tos films
- 2020
-
In: Journal of Materials Chemistry A. - : Royal Society of Chemistry. - 2050-7488 .- 2050-7496. ; 8:36, s. 18726-18734
-
Journal article (peer-reviewed)abstract
- The conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) forms a promising alternative to conventional inorganic conductors, where deposition of thin filmsviavapour phase polymerization (VPP) has gained particular interest owing to high electrical conductivity within the plane of the film. The conductivity perpendicular to the film is typically much lower, which may be related not only to preferential alignment of PEDOT crystallites but also to vertical stratification across the film. In this study, we reveal non-linear vertical microstructural variations across VPP PEDOT:Tos thin films, as well as significant differences in doping level between the top and bottom surfaces. The results are consistent with a VPP mechanism based on diffusion-limited transport of polymerization precursors. Conducting polymer films with vertical inhomogeneity may find applications in gradient-index optics, functionally graded thermoelectrics, and optoelectronic devices requiring gradient doping.
|
|
10. |
- Kim, Nara, 1985-, et al.
(author)
-
Electric transport properties in PEDOT thin films
- 2019. - 4
-
In: Conjugated polymers. - Boca Raton : CRC Press. - 9780429190520 ; , s. 45-128
-
Book chapter (peer-reviewed)abstract
- In this chapter, the authors summarize their understanding of Poly(3,4-ethylenedioxythiophene) (PEDOT), with respect to its chemical and physical fundamentals. They focus upon the structure of several PEDOT systems, from the angstrom level and up, and the impact on both electronic and ionic transport. The authors discuss the structural properties of PEDOT:X and PEDOT:poly(styrenesulfonate) based on experimental data probed at the scale ranging from angstrom to submicrometer. The morphology of PEDOT is influenced by the nature of counter-ions, especially at high oxidation levels. The doping anions intercalate between PEDOT chains to form a “sandwich” structure to screen the positive charges in PEDOT chains. The authors provide the main transport coefficients such as electrical conductivity s, Seebeck coefficient S, and Peltier coefficient σ, starting from a general thermodynamic consideration. The optical conductivity of PEDOT has also been examined based on the effective medium approximation, which is normally used to describe microscopic permittivity properties of composites made from several different constituents.
|
|