1. |
- Afshari, Davood, et al.
(author)
-
On Residual Stresses in Resistance Spot-Welded Aluminum Alloy 6061-T6 : Experimental and Numerical Analysis
- 2013
-
In: Journal of materials engineering and performance (Print). - : Springer Science and Business Media LLC. - 1059-9495 .- 1544-1024. ; 22:12, s. 3612-3619
-
Journal article (peer-reviewed)abstract
- In this study, an electro-thermal-structural-coupled finite element (FE) model and x-ray diffraction residual stress measurements have been utilized to analyze distribution of residual stresses in an aluminum alloy 6061-T6 resistance spot-welded joint with 2-mm-thickness sheet. Increasing the aluminum sheet thickness to more than 1 mm leads to creating difficulty in spot-welding process and increases the complexity of the FE model. The electrical and thermal contact conductances, as mandatory factors are applied in contact areas of electrode-workpiece and workpiece-workpiece to resolve the complexity of the FE model. The physical and mechanical properties of the material are defined as thermal dependent to improve the accuracy of the model. Furthermore, the electrodes are removed after the holding cycle using the birth-and-death elements method. The results have a good agreement with experimental data obtained from x-ray diffraction residual stress measurements. However, the highest internal tensile residual stress occurs in the center of the nugget zone and decreases toward nugget edge; surface residual stress increases toward the edge of the welding zone and afterward, the area decreases slightly.
|
|
2. |
- Afshari, Davood, et al.
(author)
-
Prediction of the nugget size in resistance spot welding with a combination of a finite-element analysis and an artificial neural network
- 2014
-
In: Materiali in tehnologije. - 1580-2949 .- 1580-3414. ; 48:1, s. 33-38
-
Journal article (peer-reviewed)abstract
- The goal of this investigation is to predict the nugget size for a resistance spot weld of thick aluminum 6061-T6 sheets 2 mm. The quality and strength of spot welds determine the integrity of the structure, which depends thoroughly on the nugget size. In this study, the finite-element method and artificial neural network were used to predict the nugget size. Different spot welding parameters such as the welding current and the welding time were selected to be used for a coupled, thermal-electrical-structural finite-element model. In order to validate the numerical results a series of experiments were carried out and the nugget sizes were measured. The results obtained with the finite-element analysis were used to build up a back-propagation, artificial-neural-network model for the nugget-size prediction. The results revealed that a combination of these two developed models can accurately and rapidly predict the nugget size for a resistance spot weld.
|
|
3. |
|
|
4. |
- Morawska, L., et al.
(author)
-
Indoor aerosols: from personal exposure to risk assessment
- 2013
-
In: Indoor Air. - : Hindawi Limited. - 0905-6947. ; 23:6, s. 462-487
-
Research review (peer-reviewed)abstract
- Motivated by growing considerations of the scale, severity, and risks associated with human exposure to indoor particulate matter, this work reviewed existing literature to: (i) identify state-of-the-art experimental techniques used for personal exposure assessment; (ii) compare exposure levels reported for domestic/school settings in different countries (excluding exposure to environmental tobacco smoke and particulate matter from biomass cooking in developing countries); (iii) assess the contribution of outdoor background vs indoor sources to personal exposure; and (iv) examine scientific understanding of the risks posed by personal exposure to indoor aerosols. Limited studies assessing integrated daily residential exposure to just one particle size fraction, ultrafine particles, show that the contribution of indoor sources ranged from 19% to 76%. This indicates a strong dependence on resident activities, source events and site specificity, and highlights the importance of indoor sources for total personal exposure. Further, it was assessed that 10-30% of the total burden of disease from particulate matter exposure was due to indoor-generated particles, signifying that indoor environments are likely to be a dominant environmental factor affecting human health. However, due to challenges associated with conducting epidemiological assessments, the role of indoor-generated particles has not been fully acknowledged, and improved exposure/risk assessment methods are still needed, together with a serious focus on exposure control.
|
|