1. |
- Aasmundtveit, K.E., et al.
(author)
-
Structural anisotropy of poly(alkylthiophene) films
- 2000
-
In: Macromolecules. - : American Chemical Society (ACS). - 0024-9297 .- 1520-5835. ; 33:8, s. 3120-3127
-
Journal article (peer-reviewed)abstract
- The structural anisotropy of various poly(alkylthiophene) films have been studied by X-ray diffraction, using both conventional methods and synchrotron radiation at grazing incidence. Solution-cast films orient with the side chains preferably normal to the film surface, whereas spin-cast films of nonstereoregular material orient with both the main and the side chains in the film plane. For thick (10-50 µm) solution-cast films, the degree of orientation depends strongly on the solvent used for casting, and on the stereoregularity of the polymer, films of stereoregular materials being more oriented than those of nonregular materials. The most oriented nonregular films are those cast from mixtures of chloroform and tetrahydrofuran. Thin (50-500 nm) solution-cast films are more oriented than the thicker ones, and the effects of different stereoregularity or different casting solvents are small. For spin-cast films, the degree of orientation is independent of substrate and solvent. Spin-cast films of stereoregular material have two different phases: One with the side chains normal to the substrate, and another where they are parallel to the substrate. The diffraction peaks of spin-cast poly(octylthiophene) narrow considerably upon heating.
|
|
2. |
- Aasmundtveit, K.E., et al.
(author)
-
Structural ordering in phenyl-substituted polythiophenes
- 2000
-
In: Macromolecules. - : American Chemical Society (ACS). - 0024-9297 .- 1520-5835. ; 33:15, s. 5481-5489
-
Journal article (peer-reviewed)abstract
- Various substituted poly(phenylthiophene)s have been studied by X-ray diffraction. They are semicrystalline, with very different degrees of crystallinity. Those with para-substituted phenyl groups have a low degree of crystallinity, whereas those with ortho-substituted phenyl groups are more crystalline. The most crystalline materials in this study have two equally long substituents on the phenyl ring, one at the ortho position and the other at the ortho or meta position on the opposite side of the phenyl ring. Poly(3-(2,5-dioctylphenyl)thiophene) (PDOPT) was most thoroughly studied, and a structural model is proposed. The structure of PDOPT is quite different from previously studied substituted polythiophenes in that the octyl side chains are directed normal to the thiophene planes. In this way, the conjugated polymer chains are kept separated from each other. Solution-cast and spin-cast PDOPT films are anisotropic, with the octyl side chains oriented normal to the film surface in both cases. This is contrary to the situation for poly(3-alkylthiophene)s, where solution-cast and spin-cast films orient in different ways.
|
|
3. |
- Agag, Tarek, et al.
(author)
-
Primary Amine-Functional Benzoxazine Monomers and Their Use for Amide-Containing Monomeric Benzoxazines
- 2010
-
In: Macromolecules. - : American Chemical Society (ACS). - 0024-9297 .- 1520-5835. ; 43:6, s. 2748-2758
-
Journal article (peer-reviewed)abstract
- Amino-functional benzoxazine monomers have been successfully prepared. Several routes have been applied to incorporate amino group into benzoxazine structure. These approaches include reduction of the corresponding nitro-functional benzoxazines and deprotection of protected amino-functional benzoxazine monomers. Various approaches that allow primary amine groups to be prepared without damaging the existing benzoxazine groups have been evaluated. Tetrachlorophthalimide and trifluoroacetyl are found to be suitable protecting groups. In addition, a model compound of amide-functional benzoxazines is prepared from primary amine-functional benzoxazine. Fourier transform infrared spectroscopy (FTIR) and H-1 and C-13 nuclear magnetic resonance spectroscopy (NMR) are used to characterize the structure of the monomers. The polymerization behavior of amino-functional monomers and model compound are studied by differential scanning calorimetry (DSC).
|
|
4. |
- Akinchina, Anna, et al.
(author)
-
Monte Carlo simulations of polyion-macroion complexes. 1. Equal absolute polyion and macroion charges
- 2002
-
In: Macromolecules. - : American Chemical Society (ACS). - 0024-9297 .- 1520-5835. ; 35:13, s. 5183-5193
-
Journal article (peer-reviewed)abstract
- Intermolecular structures of complexes formed between a charged polymer and a spherical and oppositely charged macroion have been studied by employing the primitive model solved by Monte Carlo simulations. The strong-complex case involving a polyion and a macroion with equal absolute charges and without small ions was considered. The influence of the polyion flexibility with a bare persistence length ranging from 7 to 1000 Angstrom for four different systems characterized by different polyion linear charge densities and macroion sizes has been examined. Radial distributions, polyion bead complexation probabilities, loop, tail, and train characteristics, and energetic analysis have been performed. The strongest and most compact complex, involving a collapsed polyion wrapping the macroion, was formed for a semiflexible chain. As the stiffness was increased, this state was transformed into a range of different structures comprising "tennis ball seam"-like, solenoid, multiloop ("rosette"), and single-loop arrangements as well as structures involving only a single polyion-macroion contact region.
|
|
5. |
- Algers, John, et al.
(author)
-
Free volume and density gradients of amorphous polymer surfaces as determined by use of a pulsed low-energy positron lifetime beam and PVT data
- 2004
-
In: Macromolecules. - : American Chemical Society (ACS). - 0024-9297 .- 1520-5835. ; 37:11, s. 4201-4210
-
Journal article (peer-reviewed)abstract
- Density gradient widths at the polymer-vacuum surfaces of poly(methyl methacrylate), styrene-co-acrylonitrile, and styrene-co-maleic anhydride were quantified to 2, 5, and 4 rim, respectively, by use of a pulsed low-energy positron lifetime beam and to approximately 1.5 nm for all three polymers on the basis of theoretical predictions from pressure-volume-temperature (PVT) data, making use of the Cahn-Hilliard theory of inhomogeneous systems in conjunction with the Sanchez-Lacombe lattice fluid theory. Excellent agreement between the two methods was found for the homopolymer, whereas for the copolymers, the former method gave larger density gradient widths, a result attributed to the surface orientation of the less polar polymer segments, which the theoretical predictions did not take into account. As has been previously proposed, the discrepancy between the depth ranges of the surface effects on density and the glass transition temperature (T-g) is suggested to result from a coupling between the dynamics of adjoining polymer segments, canceling a direct relationship between local density profile rho(z) and local T-g(z) as a function of distance z from the free surface.
|
|
6. |
- Algers, John, et al.
(author)
-
Free volume determination of azobenzene-PMMA copolymer by a pulsed low-energy positron lifetime beam with in-situ UV illumination
- 2004
-
In: Macromolecules. - : American Chemical Society (ACS). - 0024-9297 .- 1520-5835. ; 37:21, s. 8035-8042
-
Journal article (peer-reviewed)abstract
- The free volume properties of a poly(methyl methacrylate)-azobenzene copolymer were for the first time directly probed by use of a low-energy positron lifetime beam with in-situ excitation capabilities, showing that the free volume cavity size was not appreciably influenced by photoisomerization and thermal isomerization in the temperature range 34-180 degreesC. lsomerization is therefore suggested to occur without any molecular rearrangement of the glassy polymer matrix, which would also account for the lack of any shift to shorter wavelengths for the photoisomerization occurring in a glassy polymer in comparison to a chloroform solution. A decrease in the thermal isomerization rate at room temperature caused by the glassy polymer is explained in terms of a model in which only a fraction of the azobenzene is free to isomerize. The cis-azobenzene was found to be an efficient inhibitor of positronium formation, which enabled measurements of thermal isomerization rates and changes in the steady-state concentration of cis-azobenzene for an illuminated sample as a function of temperature.
|
|
7. |
- Alizadehheidari, Mohammadreza, 1987, et al.
(author)
-
Nanoconfined Circular and Linear DNA: Equilibrium Conformations and Unfolding Kinetics
- 2015
-
In: Macromolecules. - : American Chemical Society (ACS). - 0024-9297 .- 1520-5835. ; 48:3, s. 871-878
-
Journal article (peer-reviewed)abstract
- Studies of circular DNA confined to nanofluidic channels are relevant both from a fundamental polymer-physics perspective and due to the importance of circular DNA molecules in vivo. We here observe the unfolding of confined DNA from the circular to linear configuration as a light-induced double-strand break occurs, characterize the dynamics, and compare the equilibrium conformational statistics of linear and circular configurations. This is important because it allows us to determine to what extent existing statistical theories describe the extension of confined circular DNA. We find that the ratio of the extensions of confined linear and circular DNA configurations increases as the buffer concentration decreases. The experimental results fall between theoretical predictions for the extended de Gennes regime at weaker confinement and the Odijk regime at stronger confinement. We show that it is possible to directly distinguish between circular and linear DNA molecules by measuring the emission intensity from the DNA. Finally, we determine the rate of unfolding and show that this rate is larger for more confined DNA, possibly reflecting the corresponding larger difference in entropy between the circular and linear configurations.
|
|
8. |
- Allushi, Andrit, et al.
(author)
-
Polyfluorenes Bearing N,N-Dimethylpiperidinium Cations on Short Spacers for Durable Anion Exchange Membranes
- 2023
-
In: Macromolecules. - : American Chemical Society (ACS). - 0024-9297 .- 1520-5835. ; 56:3, s. 1165-1176
-
Journal article (peer-reviewed)abstract
- Alicyclic quaternary ammonium cations having all the β-protons in a strain-free ring structure are in general highly base resistant, and are thus very attractive to employ for anion exchange membrane (AEM) applications. However, tethering cations such as N,N-dimethylpiperidinium (DMP) to polymer backbones without introducing any weak links is quite challenging. In the present study, we have attached pairs of piperidine rings in their 4-position to fluorene and 2,7-diphenylfluorene via methylene bridges using straightforward SN2 reactions. These fluorenes were subsequently utilized as monomers in polyhydroxyalkylations to prepare poly(fluorene alkylene)s with different contents of the piperidine groups. AEMs were cast after quaternizing the piperidine groups to introduce DMP and spirocyclic 6-azonia-spiro-[5,5]undecane-6-ium (ASU) cations, respectively. The AEMs reached very high hydroxide ion conductivities, 100-156 mS cm-1 at 80 ºC, in the ion exchange capacity (IEC) range 1.8-2.4 mequiv. g-1. X-ray scattering showed ionomer peaks indicating ionic clustering with a characteristic distance d = 2.0-2.9 nm depending on IEC. The AEMs displayed high thermal stability, up to ~250 ºC, and 1H NMR data indicated no degradation after storage in 5 M aq. NaOH during 168 h at 90 ºC. However, degradation started under very severe conditions (10 M, 90 °C) with ~75% of the total ionic loss in all the AEMs assigned to Hofmann β-elimination. The overall results show that fluorene-based AEMs carrying DMP and ASU cations via methylene bridges display an attractive combination of ionic phase separation, thermal and chemical stability, and hydroxide conductivity.
|
|
9. |
- Andersson, Mats R., et al.
(author)
-
Electroluminescence from Substituted Poly(thiophenes) : From Blue to Near-Infrared
- 1995
-
In: Macromolecules. - : American Chemical Society. - 0024-9297 .- 1520-5835. ; 28:22, s. 7525-7529
-
Journal article (peer-reviewed)abstract
- We report a systematic approach to the control of the conjugation length along the poly(thiophene) backbone. The planarity of the main chain can be permanently modified by altering the pattern of substitution and character of the substituents on the poly(thiophene) chain, and the conjugation length is thus modified. We obtain blue, green, orange, red, and near-infrared electroluminescence from four chemically distinct poly(thiophenes). The external quantum efficiencies are in the range of 0.01-0.6%.
|
|
10. |
- Andersson, Mats R., et al.
(author)
-
Regioselective polymerization of 3-(4-octylphenyl)thiophene with FeCl3
- 1994
-
In: Macromolecules. - : American Chemical Society. - 0024-9297 .- 1520-5835. ; 27:22, s. 6503-6506
-
Journal article (peer-reviewed)abstract
- We have shown that it is possible to regioselectively polymerize 3-(4-octylphenyl) thiophene with FeCl3. Adding FeCl3 slowly to the monomer leads to a soft and therefore regioselective polymerization. The head-to-tail content was determined by H-1 NMR to be 94 +/- 2%. Thin films of the polymer treated with chloroform vapor have an absorption maximum at 602 nm (2.06 eV) with clear vibronic fine structure. Free standing films have a conductivity of 4 S/cm, which is 100 times higher than for earlier prepared poly(3-(4-octylphenyl)thiophene). A mechanism for the regioregular polymerization is also proposed.
|
|