| 1. |
- Schael, S., et al.
(author)
-
Electroweak measurements in electron positron collisions at W-boson-pair energies at LEP
- 2013
-
In: Physics Reports. - : Elsevier BV. - 0370-1573 .- 1873-6270. ; 532:4, s. 119-244
-
Research review (peer-reviewed)abstract
- Electroweak measurements performed with data taken at the electron positron collider LEP at CERN from 1995 to 2000 are reported. The combined data set considered in this report corresponds to a total luminosity of about 3 fb(-1) collected by the four LEP experiments ALEPH, DELPHI, 13 and OPAL, at centre-of-mass energies ranging from 130 GeV to 209 GeV. Combining the published results of the four LEP experiments, the measurements include total and differential cross-sections in photon-pair, fermion-pair and four-fermion production, the latter resulting from both double-resonant WW and ZZ production as well as singly resonant production. Total and differential cross-sections are measured precisely, providing a stringent test of the Standard Model at centre-of-mass energies never explored before in electron positron collisions. Final-state interaction effects in four-fermion production, such as those arising from colour reconnection and Bose Einstein correlations between the two W decay systems arising in WW production, are searched for and upper limits on the strength of possible effects are obtained. The data are used to determine fundamental properties of the W boson and the electroweak theory. Among others, the mass and width of the W boson, m(w) and Gamma(w), the branching fraction of W decays to hadrons, B(W -> had), and the trilinear gauge-boson self-couplings g(1)(Z), K-gamma and lambda(gamma), are determined to be: m(w) = 80.376 +/- 0.033 GeV Gamma(w) = 2.195 +/- 0.083 GeV B(W -> had) = 67.41 +/- 0.27% g(1)(Z) = 0.984(-0.020)(+0.018) K-gamma - 0.982 +/- 0.042 lambda(gamma) = 0.022 +/- 0.019. (C) 2013 Elsevier B.V. All rights reserved.
|
|
| 2. |
- Schael, S, et al.
(author)
-
Precision electroweak measurements on the Z resonance
- 2006
-
In: Physics Reports. - : Elsevier BV. - 0370-1573 .- 1873-6270. ; 427:5-6, s. 257-454
-
Research review (peer-reviewed)abstract
- We report on the final electroweak measurements performed with data taken at the Z resonance by the experiments operating at the electron-positron colliders SLC and LEP. The data consist of 17 million Z decays accumulated by the ALEPH, DELPHI, L3 and OPAL experiments at LEP, and 600 thousand Z decays by the SLID experiment using a polarised beam at SLC. The measurements include cross-sections, forward-backward asymmetries and polarised asymmetries. The mass and width of the Z boson, m(Z) and Gamma(Z), and its couplings to fermions, for example the p parameter and the effective electroweak mixing angle for leptons, are precisely measured: m(Z) = 91.1875 +/- 0.0021 GeV, Gamma(Z) = 2.4952 +/- 0.0023 GeV, rho(l) = 1.0050 +/- 0.0010, sin(2)theta(eff)(lept) = 0.23153 +/- 0.00016. The number of light neutrino species is determined to be 2.9840 +/- 0.0082, in agreement with the three observed generations of fundamental fermions. The results are compared to the predictions of the Standard Model (SM). At the Z-pole, electroweak radiative corrections beyond the running of the QED and QCD coupling constants are observed with a significance of five standard deviations, and in agreement with the Standard Model. Of the many Z-pole measurements, the forward-backward asymmetry in b-quark production shows the largest difference with respect to its SM expectation, at the level of 2.8 standard deviations. Through radiative corrections evaluated in the framework of the Standard Model, the Z-pole data are also used to predict the mass of the top quark, m(t) = 173(+10)(+13) GeV, and the mass of the W boson, m(W) = 80.363 +/- 0.032 GeV. These indirect constraints are compared to the direct measurements, providing a stringent test of the SM. Using in addition the direct measurements of m(t) and m(W), the mass of the as yet unobserved SM Higgs boson is predicted with a relative uncertainty of about 50% and found to be less than 285 GeV at 95% confidence level. (c) 2006 Elsevier B.V. All rights reserved.
|
|
| 3. |
- Bombarda, F., et al.
(author)
-
Runaway electron beam control
- 2019
-
In: Plasma Physics and Controlled Fusion. - : IOP Publishing. - 1361-6587 .- 0741-3335. ; 61:1
-
Journal article (peer-reviewed)
|
|
| 4. |
-
- 2018
-
In: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 58:1
-
Research review (peer-reviewed)
|
|
| 5. |
- Joffrin, E., et al.
(author)
-
Overview of the JET preparation for deuterium-tritium operation with the ITER like-wall
- 2019
-
In: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 59:11
-
Research review (peer-reviewed)abstract
- For the past several years, the JET scientific programme (Pamela et al 2007 Fusion Eng. Des. 82 590) has been engaged in a multi-campaign effort, including experiments in D, H and T, leading up to 2020 and the first experiments with 50%/50% D-T mixtures since 1997 and the first ever D-T plasmas with the ITER mix of plasma-facing component materials. For this purpose, a concerted physics and technology programme was launched with a view to prepare the D-T campaign (DTE2). This paper addresses the key elements developed by the JET programme directly contributing to the D-T preparation. This intense preparation includes the review of the physics basis for the D-T operational scenarios, including the fusion power predictions through first principle and integrated modelling, and the impact of isotopes in the operation and physics of D-T plasmas (thermal and particle transport, high confinement mode (H-mode) access, Be and W erosion, fuel recovery, etc). This effort also requires improving several aspects of plasma operation for DTE2, such as real time control schemes, heat load control, disruption avoidance and a mitigation system (including the installation of a new shattered pellet injector), novel ion cyclotron resonance heating schemes (such as the three-ions scheme), new diagnostics (neutron camera and spectrometer, active Alfven eigenmode antennas, neutral gauges, radiation hard imaging systems...) and the calibration of the JET neutron diagnostics at 14 MeV for accurate fusion power measurement. The active preparation of JET for the 2020 D-T campaign provides an incomparable source of information and a basis for the future D-T operation of ITER, and it is also foreseen that a large number of key physics issues will be addressed in support of burning plasmas.
|
|
| 6. |
-
- 2018
-
In: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 58:9
-
Journal article (peer-reviewed)
|
|
| 7. |
- Abreu, P., et al.
(author)
-
Search for sleptons in e+e- collisions at √s = 183 to 189 GeV
- 2001
-
In: European Physical Journal C. - : Springer Science and Business Media LLC. - 1434-6044 .- 1434-6052. ; 19:1, s. 29-42
-
Journal article (peer-reviewed)abstract
- Data taken by the DELPHI experiment at centre-of-mass energies of 183 GeV and 189 GeV with a total integrated luminosity of 212 pb-1 have been used to search for the supersymmetric partners of the electrons, muons, and taus in the context of the Minimal Supersymmetric Standard Model (MSSM). The decay topologies searched for were the direct decay (ℓ̃ → ℓx̃), producing acoplanar lepton pairs plus missing energy, and the cascade decay (ℓ → ℓx̃0 2 → ℓγx̃0 1), producing acoplanar lepton and photon pairs plus missing energy. The observed number of events is in agreement with Standard Model predictions. The 95% CL excluded mass limits for selectrons, smuons and staus are mẽ ≤ 87 GeV/c2, mμ̃ ≤ 80 GeV/c2 and mτ̃ 75 GeV/c2, respectively, for values of μ=-200 GeV/c2 and tanβ=1.5.
|
|
| 8. |
- Meyer, H., et al.
(author)
-
Overview of progress in European medium sized tokamaks towards an integrated plasma-edge/wall solution
- 2017
-
In: Nuclear Fusion. - : Institute of Physics Publishing (IOPP). - 0029-5515 .- 1741-4326. ; 57:10
-
Journal article (peer-reviewed)abstract
- Integrating the plasma core performance with an edge and scrape-off layer (SOL) that leads to tolerable heat and particle loads on the wall is a major challenge. The new European medium size tokamak task force (EU-MST) coordinates research on ASDEX Upgrade (AUG), MAST and TCV. This multi-machine approach within EU-MST, covering a wide parameter range, is instrumental to progress in the field, as ITER and DEMO core/pedestal and SOL parameters are not achievable simultaneously in present day devices. A two prong approach is adopted. On the one hand, scenarios with tolerable transient heat and particle loads, including active edge localised mode (ELM) control are developed. On the other hand, divertor solutions including advanced magnetic configurations are studied. Considerable progress has been made on both approaches, in particular in the fields of: ELM control with resonant magnetic perturbations (RMP), small ELM regimes, detachment onset and control, as well as filamentary scrape-off-layer transport. For example full ELM suppression has now been achieved on AUG at low collisionality with n = 2 RMP maintaining good confinement H-H(98,H-y2) approximate to 0.95. Advances have been made with respect to detachment onset and control. Studies in advanced divertor configurations (Snowflake, Super-X and X-point target divertor) shed new light on SOL physics. Cross field filamentary transport has been characterised in a wide parameter regime on AUG, MAST and TCV progressing the theoretical and experimental understanding crucial for predicting first wall loads in ITER and DEMO. Conditions in the SOL also play a crucial role for ELM stability and access to small ELM regimes.
|
|
| 9. |
- Bécoulet, A., et al.
(author)
-
Science and technology research and development in support to ITER and the Broader Approach at CEA
- 2013
-
In: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 53:10
-
Journal article (peer-reviewed)abstract
- In parallel to the direct contribution to the procurement phase of ITER and Broader Approach, CEA has initiated research & development programmes, accompanied by experiments together with a significant modelling effort, aimed at ensuring robust operation, plasma performance, as well as mitigating the risks of the procurement phase. This overview reports the latest progress in both fusion science and technology including many areas, namely the mitigation of superconducting magnet quenches, disruption-generated runaway electrons, edge-localized modes (ELMs), the development of imaging surveillance, and heating and current drive systems for steady-state operation. The WEST (W Environment for Steady-state Tokamaks) project, turning Tore Supra into an actively cooled W-divertor platform open to the ITER partners and industries, is presented.
|
|
| 10. |
- Meyer, H., et al.
(author)
-
Overview of progress in European medium sized tokamaks towards an integrated plasma-edge/wall solution
- 2017
-
In: Nuclear Fusion. - : Institute of Physics Publishing (IOPP). - 0029-5515 .- 1741-4326. ; 57:10
-
Journal article (peer-reviewed)abstract
- Integrating the plasma core performance with an edge and scrape-off layer (SOL) that leads to tolerable heat and particle loads on the wall is a major challenge. The new European medium size tokamak task force (EU-MST) coordinates research on ASDEX Upgrade (AUG), MAST and TCV. This multi-machine approach within EU-MST, covering a wide parameter range, is instrumental to progress in the field, as ITER and DEMO core/pedestal and SOL parameters are not achievable simultaneously in present day devices. A two prong approach is adopted. On the one hand, scenarios with tolerable transient heat and particle loads, including active edge localised mode (ELM) control are developed. On the other hand, divertor solutions including advanced magnetic configurations are studied. Considerable progress has been made on both approaches, in particular in the fields of: ELM control with resonant magnetic perturbations (RMP), small ELM regimes, detachment onset and control, as well as filamentary scrape-off-layer transport. For example full ELM suppression has now been achieved on AUG at low collisionality with n = 2 RMP maintaining good confinement H-H(98,H-y2) approximate to 0.95. Advances have been made with respect to detachment onset and control. Studies in advanced divertor configurations (Snowflake, Super-X and X-point target divertor) shed new light on SOL physics. Cross field filamentary transport has been characterised in a wide parameter regime on AUG, MAST and TCV progressing the theoretical and experimental understanding crucial for predicting first wall loads in ITER and DEMO. Conditions in the SOL also play a crucial role for ELM stability and access to small ELM regimes.
|
|
| 11. |
- Singh, B. P., et al.
(author)
-
Experimental access to Transition Distribution Amplitudes with the PANDA experiment at FAIR
- 2015
-
In: European Physical Journal A. Hadrons and Nuclei. - : Springer Science and Business Media LLC. - 1434-6001 .- 1434-601X. ; 51:8
-
Journal article (peer-reviewed)abstract
- Baryon-to-meson Transition Distribution Amplitudes (TDAs) encoding valuable new information on hadron structure appear as building blocks in the collinear factorized description for several types of hard exclusive reactions. In this paper, we address the possibility of accessing nucleon-to-pion (pi N) TDAs from (p) over barp -> e(+)e(-)pi(0) reaction with the future PANDA detector at the FAIR facility. At high center-of-mass energy and high invariant mass squared of the lepton pair q(2), the amplitude of the signal channel (p) over barp -> e(+)e(-)pi(0) admits a QCD factorized description in terms of pi N TDAs and nucleon Distribution Amplitudes (DAs) in the forward aid backward kinematic regimes. Assuming the validity of this factorized description, we perform feasibility studies for measuring (p) over barp -> e(+)e(-)pi(0) with the PANDA detector. Detailed simulations on signal reconstruction efficiency as well as on rejection of the most severe background channel, i.e. (p) over barp -> pi(+)pi(-)pi(0) were performed for the center-of-mass energy squared s = 5 GeV2 and s = 10 GeV2, in the kinematic regions 3.0 < q(2) < 4.3 GeV2 and 5 < q(2) < 9 GeV2, respectively, with a neutral pion scattered in the forward or backward cone vertical bar cos theta(pi 0)vertical bar > 0.5 in the proton-antiproton center-of-mass frame. Results of the simulation show that the particle identification capabilities of the PANDA detector will allow to achieve a background rejection factor of 5 . 10(7) (1 . 10(7)) at low (high) q(2) for s = 5 GeV2, and of 1 . 10(8) (6 . 10(6)) at low (high) q(2) for s = 10 GeV2, while keeping the signal reconstruction efficiency at around 40%. At both energies, a clean lepton signal can be reconstructed with the expected statistics corresponding to 2 of integrated luminosity. The cross sections obtained from the simulations are used to show that a test of QCD collinear factorization can be done at the lowest order by measuring scaling laws and angular distributions. The future measurement of the signal channel cross section with PANDA will provide a new test of the perturbative QCD description of a novel class of hard exclusive reactions and will open the possibility of experimentally accessing pi N TDAs.
|
|
| 12. |
- Erni, W., et al.
(author)
-
Technical design report for the PANDA (AntiProton Annihilations at Darmstadt) Straw Tube Tracker
- 2013
-
In: European Physical Journal A. Hadrons and Nuclei. - : Springer Science and Business Media LLC. - 1434-6001 .- 1434-601X. ; 49:2
-
Journal article (peer-reviewed)abstract
- This document describes the technical layout and the expected performance of the Straw Tube Tracker (STT), the main tracking detector of the PANDA target spectrometer. The STT encloses a Micro-Vertex-Detector (MVD) for the inner tracking and is followed in beam direction by a set of GEM stations. The tasks of the STT are the measurement of the particle momentum from the reconstructed trajectory and the measurement of the specific energy loss for a particle identification. Dedicated simulations with full analysis studies of certain proton-antiproton reactions, identified as being benchmark tests for the whole PANDA scientific program, have been performed to test the STT layout and performance. The results are presented, and the time lines to construct the STT are described.
|
|
| 13. |
- Labit, B., et al.
(author)
-
Dependence on plasma shape and plasma fueling for small edge-localized mode regimes in TCV and ASDEX Upgrade
- 2019
-
In: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 59:8
-
Journal article (peer-reviewed)abstract
- © 2019 Institute of Physics Publishing. All rights reserved. Within the EUROfusion MST1 work package, a series of experiments has been conducted on AUG and TCV devices to disentangle the role of plasma fueling and plasma shape for the onset of small ELM regimes. On both devices, small ELM regimes with high confinement are achieved if and only if two conditions are fulfilled at the same time. Firstly, the plasma density at the separatrix must be large enough (ne,sep/nG ∼ 0.3), leading to a pressure profile flattening at the separatrix, which stabilizes type-I ELMs. Secondly, the magnetic configuration has to be close to a double null (DN), leading to a reduction of the magnetic shear in the extreme vicinity of the separatrix. As a consequence, its stabilizing effect on ballooning modes is weakened.
|
|
| 14. |
- Stroth, U., et al.
(author)
-
Progress from ASDEX Upgrade experiments in preparing the physics basis of ITER operation and DEMO scenario development
- 2022
-
In: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 62:4
-
Journal article (peer-reviewed)abstract
- An overview of recent results obtained at the tokamak ASDEX Upgrade (AUG) is given. A work flow for predictive profile modelling of AUG discharges was established which is able to reproduce experimental H-mode plasma profiles based on engineering parameters only. In the plasma center, theoretical predictions on plasma current redistribution by a dynamo effect were confirmed experimentally. For core transport, the stabilizing effect of fast ion distributions on turbulent transport is shown to be important to explain the core isotope effect and improves the description of hollow low-Z impurity profiles. The L-H power threshold of hydrogen plasmas is not affected by small helium admixtures and it increases continuously from the deuterium to the hydrogen level when the hydrogen concentration is raised from 0 to 100%. One focus of recent campaigns was the search for a fusion relevant integrated plasma scenario without large edge localised modes (ELMs). Results from six different ELM-free confinement regimes are compared with respect to reactor relevance: ELM suppression by magnetic perturbation coils could be attributed to toroidally asymmetric turbulent fluctuations in the vicinity of the separatrix. Stable improved confinement mode plasma phases with a detached inner divertor were obtained using a feedback control of the plasma β. The enhanced D α H-mode regime was extended to higher heating power by feedback controlled radiative cooling with argon. The quasi-coherent exhaust regime was developed into an integrated scenario at high heating power and energy confinement, with a detached divertor and without large ELMs. Small ELMs close to the separatrix lead to peeling-ballooning stability and quasi continuous power exhaust. Helium beam density fluctuation measurements confirm that transport close to the separatrix is important to achieve the different ELM-free regimes. Based on separatrix plasma parameters and interchange-drift-Alfvén turbulence, an analytic model was derived that reproduces the experimentally found important operational boundaries of the density limit and between L- and H-mode confinement. Feedback control for the X-point radiator (XPR) position was established as an important element for divertor detachment control. Stable and detached ELM-free phases with H-mode confinement quality were obtained when the XPR was moved 10 cm above the X-point. Investigations of the plasma in the future flexible snow-flake divertor of AUG by means of first SOLPS-ITER simulations with drifts activated predict beneficial detachment properties and the activation of an additional strike point by the drifts.
|
|
| 15. |
- Coda, S., et al.
(author)
-
Overview of the TCV tokamak program : Scientific progress and facility upgrades
- 2017
-
In: Nuclear Fusion. - : Institute of Physics Publishing. - 0029-5515 .- 1741-4326. ; 57:10
-
Journal article (peer-reviewed)abstract
- The TCV tokamak is augmenting its unique historical capabilities (strong shaping, strong electron heating) with ion heating, additional electron heating compatible with high densities, and variable divertor geometry, in a multifaceted upgrade program designed to broaden its operational range without sacrificing its fundamental flexibility. The TCV program is rooted in a three-pronged approach aimed at ITER support, explorations towards DEMO, and fundamental research. A 1 MW, tangential neutral beam injector (NBI) was recently installed and promptly extended the TCV parameter range, with record ion temperatures and toroidal rotation velocities and measurable neutral-beam current drive. ITER-relevant scenario development has received particular attention, with strategies aimed at maximizing performance through optimized discharge trajectories to avoid MHD instabilities, such as peeling-ballooning and neoclassical tearing modes. Experiments on exhaust physics have focused particularly on detachment, a necessary step to a DEMO reactor, in a comprehensive set of conventional and advanced divertor concepts. The specific theoretical prediction of an enhanced radiation region between the two X-points in the low-field-side snowflake-minus configuration was experimentally confirmed. Fundamental investigations of the power decay length in the scrape-off layer (SOL) are progressing rapidly, again in widely varying configurations and in both D and He plasmas; in particular, the double decay length in L-mode limited plasmas was found to be replaced by a single length at high SOL resistivity. Experiments on disruption mitigation by massive gas injection and electron-cyclotron resonance heating (ECRH) have begun in earnest, in parallel with studies of runaway electron generation and control, in both stable and disruptive conditions; a quiescent runaway beam carrying the entire electrical current appears to develop in some cases. Developments in plasma control have benefited from progress in individual controller design and have evolved steadily towards controller integration, mostly within an environment supervised by a tokamak profile control simulator. TCV has demonstrated effective wall conditioning with ECRH in He in support of the preparations for JT-60SA operation.
|
|
| 16. |
- Marco, Aitor, et al.
(author)
-
A Variable Structure Control Scheme Proposal for the Tokamak a Configuration Variable
- 2019
-
In: Complexity. - : Hindawi Publishing Corporation. - 1076-2787 .- 1099-0526.
-
Journal article (peer-reviewed)abstract
- Fusion power is the most significant prospects in the long-term future of energy in the sense that it composes a potentially clean, cheap, and unlimited power source that would substitute the widespread traditional nonrenewable energies, reducing the geographical dependence on their sources as well as avoiding collateral environmental impacts. Although the nuclear fusion research started in the earlier part of 20th century and the fusion reactors have been developed since the 1950s, the fusion reaction processes achieved have not yet obtained net power, since the generated plasma requires more energy to achieve and remain in necessary particular pressure and temperature conditions than the produced profitable energy. For this purpose, the plasma has to be confined inside a vacuum vessel, as it is the case of the Tokamak reactor, which consists of a device that generates magnetic fields within a toroidal chamber, being one of the most promising solutions nowadays. However, the Tokamak reactors still have several issues such as the presence of plasma instabilities that provokes a decay of the fusion reaction and, consequently, a reduction in the pulse duration. In this sense, since long pulse reactions are the key to produce net power, the use of robust and fast controllers arises as a useful tool to deal with the unpredictability and the small time constant of the plasma behavior. In this context, this article focuses on the application of robust control laws to improve the controllability of the plasma current, a crucial parameter during the plasma heating and confinement processes. In particular, a variable structure control scheme based on sliding surfaces, namely, a sliding mode controller (SMC) is presented and applied to the plasma current control problem. In order to test the validity and goodness of the proposed controller, its behavior is compared to that of the traditional PID schemes applied in these systems, using the RZIp model for the Tokamak a Configuration Variable (TCV) reactor. The obtained results are very promising, leading to consider this controller as a strong candidate to enhance the performance of the PID-based controllers usually employed in this kind of systems.
|
|
| 17. |
- Meyer, H.F., et al.
(author)
-
Overview of physics studies on ASDEX Upgrade
- 2019
-
In: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 59:11
-
Research review (peer-reviewed)abstract
- The ASDEX Upgrade (AUG) programme, jointly run with the EUROfusion MST1 task force, continues to significantly enhance the physics base of ITER and DEMO. Here, the full tungsten wall is a key asset for extrapolating to future devices. The high overall heating power, flexible heating mix and comprehensive diagnostic set allows studies ranging from mimicking the scrape-off-layer and divertor conditions of ITER and DEMO at high density to fully non-inductive operation (q 95 = 5.5, ) at low density. Higher installed electron cyclotron resonance heating power 6 MW, new diagnostics and improved analysis techniques have further enhanced the capabilities of AUG. Stable high-density H-modes with MW m-1 with fully detached strike-points have been demonstrated. The ballooning instability close to the separatrix has been identified as a potential cause leading to the H-mode density limit and is also found to play an important role for the access to small edge-localized modes (ELMs). Density limit disruptions have been successfully avoided using a path-oriented approach to disruption handling and progress has been made in understanding the dissipation and avoidance of runaway electron beams. ELM suppression with resonant magnetic perturbations is now routinely achieved reaching transiently . This gives new insight into the field penetration physics, in particular with respect to plasma flows. Modelling agrees well with plasma response measurements and a helically localised ballooning structure observed prior to the ELM is evidence for the changed edge stability due to the magnetic perturbations. The impact of 3D perturbations on heat load patterns and fast-ion losses have been further elaborated. Progress has also been made in understanding the ELM cycle itself. Here, new fast measurements of and E r allow for inter ELM transport analysis confirming that E r is dominated by the diamagnetic term even for fast timescales. New analysis techniques allow detailed comparison of the ELM crash and are in good agreement with nonlinear MHD modelling. The observation of accelerated ions during the ELM crash can be seen as evidence for the reconnection during the ELM. As type-I ELMs (even mitigated) are likely not a viable operational regime in DEMO studies of 'natural' no ELM regimes have been extended. Stable I-modes up to have been characterised using -feedback. Core physics has been advanced by more detailed characterisation of the turbulence with new measurements such as the eddy tilt angle - measured for the first time - or the cross-phase angle of and fluctuations. These new data put strong constraints on gyro-kinetic turbulence modelling. In addition, carefully executed studies in different main species (H, D and He) and with different heating mixes highlight the importance of the collisional energy exchange for interpreting energy confinement. A new regime with a hollow profile now gives access to regimes mimicking aspects of burning plasma conditions and lead to nonlinear interactions of energetic particle modes despite the sub-Alfvénic beam energy. This will help to validate the fast-ion codes for predicting ITER and DEMO.
|
|
| 18. |
- Coda, S., et al.
(author)
-
Physics research on the TCV tokamak facility: From conventional to alternative scenarios and beyond
- 2019
-
In: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 59:11
-
Journal article (peer-reviewed)abstract
- The research program of the TCV tokamak ranges from conventional to advanced-tokamak scenarios and alternative divertor configurations, to exploratory plasmas driven by theoretical insight, exploiting the device's unique shaping capabilities. Disruption avoidance by real-time locked mode prevention or unlocking with electron-cyclotron resonance heating (ECRH) was thoroughly documented, using magnetic and radiation triggers. Runaway generation with high-Z noble-gas injection and runaway dissipation by subsequent Ne or Ar injection were studied for model validation. The new 1 MW neutral beam injector has expanded the parameter range, now encompassing ELMy H-modes in an ITER-like shape and nearly non-inductive H-mode discharges sustained by electron cyclotron and neutral beam current drive. In the H-mode, the pedestal pressure increases modestly with nitrogen seeding while fueling moves the density pedestal outwards, but the plasma stored energy is largely uncorrelated to either seeding or fueling. High fueling at high triangularity is key to accessing the attractive small edge-localized mode (type-II) regime. Turbulence is reduced in the core at negative triangularity, consistent with increased confinement and in accord with global gyrokinetic simulations. The geodesic acoustic mode, possibly coupled with avalanche events, has been linked with particle flow to the wall in diverted plasmas. Detachment, scrape-off layer transport, and turbulence were studied in L- and H-modes in both standard and alternative configurations (snowflake, super-X, and beyond). The detachment process is caused by power 'starvation' reducing the ionization source, with volume recombination playing only a minor role. Partial detachment in the H-mode is obtained with impurity seeding and has shown little dependence on flux expansion in standard single-null geometry. In the attached L-mode phase, increasing the outer connection length reduces the in-out heat-flow asymmetry. A doublet plasma, featuring an internal X-point, was achieved successfully, and a transport barrier was observed in the mantle just outside the internal separatrix. In the near future variable-configuration baffles and possibly divertor pumping will be introduced to investigate the effect of divertor closure on exhaust and performance, and 3.5 MW ECRH and 1 MW neutral beam injection heating will be added.
|
|
| 19. |
- De Leoz, M. L. A., et al.
(author)
-
NIST Interlaboratory Study on Glycosylation Analysis of Monoclonal Antibodies: Comparison of Results from Diverse Analytical Methods
- 2020
-
In: Molecular & Cellular Proteomics. - 1535-9476. ; 19:1, s. 11-30
-
Journal article (peer-reviewed)abstract
- A broad-based interlaboratory study of glycosylation profiles of a reference and modified IgG antibody involving 103 reports from 76 laboratories. Glycosylation is a topic of intense current interest in the development of biopharmaceuticals because it is related to drug safety and efficacy. This work describes results of an interlaboratory study on the glycosylation of the Primary Sample (PS) of NISTmAb, a monoclonal antibody reference material. Seventy-six laboratories from industry, university, research, government, and hospital sectors in Europe, North America, Asia, and Australia submitted a total of 103 reports on glycan distributions. The principal objective of this study was to report and compare results for the full range of analytical methods presently used in the glycosylation analysis of mAbs. Therefore, participation was unrestricted, with laboratories choosing their own measurement techniques. Protein glycosylation was determined in various ways, including at the level of intact mAb, protein fragments, glycopeptides, or released glycans, using a wide variety of methods for derivatization, separation, identification, and quantification. Consequently, the diversity of results was enormous, with the number of glycan compositions identified by each laboratory ranging from 4 to 48. In total, one hundred sixteen glycan compositions were reported, of which 57 compositions could be assigned consensus abundance values. These consensus medians provide community-derived values for NISTmAb PS. Agreement with the consensus medians did not depend on the specific method or laboratory type. The study provides a view of the current state-of-the-art for biologic glycosylation measurement and suggests a clear need for harmonization of glycosylation analysis methods.
|
|
| 20. |
- De Angelis, A., et al.
(author)
-
Science with e-ASTROGAM A space mission for MeV-GeV gamma-ray astrophysics
- 2018
-
In: Journal of High Energy Astrophysics. - : Elsevier. - 2214-4048 .- 2214-4056. ; 19, s. 1-106
-
Journal article (peer-reviewed)abstract
- e-ASTROGAM ('enhanced ASTROGAM') is a breakthrough Observatory space mission, with a detector composed by a Silicon tracker, a calorimeter, and an anticoincidence system, dedicated to the study of the non-thermal Universe in the photon energy range from 0.3 MeV to 3 GeV - the lower energy limit can be pushed to energies as low as 150 keV for the tracker, and to 30 keV for calorimetric detection. The mission is based on an advanced space-proven detector technology, with unprecedented sensitivity, angular and energy resolution, combined with polarimetric capability. Thanks to its performance in the MeV-GeV domain, substantially improving its predecessors, e-ASTROGAM will open a new window on the non-thermal Universe, making pioneering observations of the most powerful Galactic and extragalactic sources, elucidating the nature of their relativistic outflows and their effects on the surroundings. With a line sensitivity in the MeV energy range one to two orders of magnitude better than previous generation instruments, e-ASTROGAM will determine the origin of key isotopes fundamental for the understanding of supernova explosion and the chemical evolution of our Galaxy. The mission will provide unique data of significant interest to a broad astronomical community, complementary to powerful observatories such as LIGO-Virgo-GEO600-KAGRA, SKA, ALMA, E-ELT, TMT, LSST, JWST, Athena, CTA, IceCube, KM3NeT, and LISA.
|
|
| 21. |
- Reimerdes, H., et al.
(author)
-
Overview of the TCV tokamak experimental programme
- 2022
-
In: Nuclear Fusion. - : IOP Publishing. - 1741-4326 .- 0029-5515. ; 62:4
-
Journal article (peer-reviewed)abstract
- The tokamak a configuration variable (TCV) continues to leverage its unique shaping capabilities, flexible heating systems and modern control system to address critical issues in preparation for ITER and a fusion power plant. For the 2019-20 campaign its configurational flexibility has been enhanced with the installation of removable divertor gas baffles, its diagnostic capabilities with an extensive set of upgrades and its heating systems with new dual frequency gyrotrons. The gas baffles reduce coupling between the divertor and the main chamber and allow for detailed investigations on the role of fuelling in general and, together with upgraded boundary diagnostics, test divertor and edge models in particular. The increased heating capabilities broaden the operational regime to include T (e)/T (i) similar to 1 and have stimulated refocussing studies from L-mode to H-mode across a range of research topics. ITER baseline parameters were reached in type-I ELMy H-modes and alternative regimes with 'small' (or no) ELMs explored. Most prominently, negative triangularity was investigated in detail and confirmed as an attractive scenario with H-mode level core confinement but an L-mode edge. Emphasis was also placed on control, where an increased number of observers, actuators and control solutions became available and are now integrated into a generic control framework as will be needed in future devices. The quantity and quality of results of the 2019-20 TCV campaign are a testament to its successful integration within the European research effort alongside a vibrant domestic programme and international collaborations.
|
|
| 22. |
|
|
| 23. |
- White, H, et al.
(author)
-
A certified plasmid reference material for the standardisation of BCR-ABL1 mRNA quantification by real time quantitative PCR.
- 2015
-
In: Leukemia. - : Springer Science and Business Media LLC. - 1476-5551 .- 0887-6924. ; 29:2, s. 369-376
-
Journal article (peer-reviewed)abstract
- Serial quantification of BCR-ABL1 mRNA is an important therapeutic indicator in chronic myeloid leukemia, but there is substantial variation in results reported by different laboratories. To improve comparability, an internationally accepted plasmid certified reference material (CRM) was developed according to ISO Guide 34:2009. Fragments of BCR-ABL1 (e14a2 mRNA fusion), BCR and GUSB transcripts were amplified and cloned into pUC18 to yield plasmid pIRMM0099. Six different linearised plasmid solutions were produced with the following copy number concentrations, assigned by digital PCR, and expanded uncertainties: 1.08±0.13 × 10(6), 1.08±0.11 × 10(5), 1.03±0.10 × 10(4), 1.02±0.09 × 10(3), 1.04±0.10 × 10(2) and 10.0±1.5 copies/μL. The certification of the material for the number of specific DNA fragments per plasmid, copy number concentration of the plasmid solutions and the assessment of inter-unit heterogeneity and stability were performed according to ISO Guide 35:2006. Two suitability studies performed by 63 BCR-ABL1 testing laboratories demonstrated that this set of 6 plasmid CRMs can help to standardise the numbers of measured transcripts of e14a2 BCR-ABL1 and three control genes; ABL1, BCR and GUSB. The set of 6 plasmid CRMs is distributed worldwide by the Institute for Reference Materials and Measurements (Belgium) and its authorised distributors (http://irmm.jrc.ec.europa.eu; CRM code ERM-AD623a-f).Leukemia accepted article preview online, 18 July 2014; doi:10.1038/leu.2014.217.
|
|
| 24. |
|
|
| 25. |
- Hourihane, A., et al.
(author)
-
The Gaia-ESO Survey : Homogenisation of stellar parameters and elemental abundances
- 2023
-
In: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 676
-
Journal article (peer-reviewed)abstract
- The Gaia-ESO Survey is a public spectroscopic survey that targeted greater than or similar to 10(5) stars covering all major components of the Milky Way from the end of 2011 to 2018, delivering its final public release in May 2022. Unlike other spectroscopic surveys, Gaia-ESO is the only survey that observed stars across all spectral types with dedicated, specialised analyses: from O (T-eff similar to 30 000-52 000 K) all the way to K-M (greater than or similar to 3500 K). The physics throughout these stellar regimes varies significantly, which has previously prohibited any detailed comparisons between stars of significantly different types. In the final data release (internal data release 6) of the Gaia-ESO Survey, we provide the final database containing a large number of products, such as radial velocities, stellar parameters and elemental abundances, rotational velocity, and also, for example, activity and accretion indicators in young stars and membership probability in star clusters for more than 114 000 stars. The spectral analysis is coordinated by a number of working groups (WGs) within the survey, each specialised in one or more of the various stellar samples. Common targets are analysed across WGs to allow for comparisons (and calibrations) amongst instrumental setups and spectral types. Here we describe the procedures employed to ensure all survey results are placed on a common scale in order to arrive at a single set of recommended results for use by all survey collaborators. We also present some general quality and consistency checks performed on the entirety of the survey results.
|
|
| 26. |
|
|
| 27. |
|
|
| 28. |
- Worley, C. C., et al.
(author)
-
The Gaia-ESO Survey : The DR5 analysis of the medium-resolution GIRAFFE and high-resolution UVES spectra of FGK-type stars
- 2024
-
In: Astronomy and Astrophysics. - 0004-6361 .- 1432-0746. ; 684
-
Journal article (peer-reviewed)abstract
- The Gaia-ESO Survey is an European Southern Observatory (ESO) public spectroscopic survey that targeted 105 stars in the Milky Way covering the major populations of the disk, bulge and halo. The observations were made using FLAMES on the VLT obtaining both UVES high (R ~ 47 000) and GIRAFFE medium (R ~ 20 000) resolution spectra. The analysis of the Gaia-ESO spectra was the work of multiple analysis teams (nodes) within five working groups (WG). The homogenisation of the stellar parameters within WG11 (high resolution observations of FGK stars) and the homogenisation of the stellar parameters within WG10 (medium resolution observations of FGK stars) is described here. In both cases, the homogenisation was carried out using a Bayesian Inference method developed specifically for the Gaia-ESO Survey by WG11. The method was also used for the chemical abundance homogenisation within WG11, however, the WG10 chemical abundance data set was too sparsely populated so basic corrections for each node analysis were employed for the homogenisation instead. The WG10 homogenisation primarily used the cross-match of stars with WG11 as the reference set in both the stellar parameter and chemical abundance homogenisation. In this way the WG10 homogenised results have been placed directly onto the WG11 stellar parameter and chemical abundance scales. The reference set for the metal-poor end was sparse which limited the effectiveness of the homogenisation in that regime. For WG11, the total number of stars for which stellar parameters were derived was 6 231 with typical uncertainties for Teff, log g and [Fe/H] of 32 K, 0.05 and 0.05 respectively. One or more chemical abundances out of a possible 39 elements were derived for 6 188 of the stars. For WG10, the total number of stars for which stellar parameters were derived was 76 675 with typical uncertainties for Teff, log g and [Fe/H] of 64 K, 0.15 and 0.07 respectively. One or more chemical abundances out of a possible 30 elements were derived for 64177 of the stars.
|
|
| 29. |
- Cawood, P. A., et al.
(author)
-
Provenance of the Highland Border Complex : constraints on Laurentian margin accretion in the Scottish Caledonides
- 2012
-
In: Journal of the Geological Society. - : Geological Society of London. - 0016-7649 .- 2041-479X. ; 169:5
-
Journal article (peer-reviewed)abstract
- Contrasting tectonic models for the Highland Border Complex in the Scottish Caledonides view it either as part of the rifted Laurentian margin of the Iapetus Ocean or as an oceanic terrane. Detrital zircon data from sandstones of the complex yield age peaks at 2.8–2.6, 1.3 and 1.1–1.0 Ga and minor peaks at c. 1.7–1.9 Ga. These characteristics compare closely with those of the upper Dalradian Supergroup of the adjacent Grampian terrane, and with the record of eastern Laurentia. The data are also consistent with the Laurentian provenance indicated by palaeontological evidence from the complex, and field evidence for continuity with the Dalradian Supergroup. Detrital ages for the Cambrian Salterella Grit of the Caledonian foreland compare with those for approximately age-equivalent sandstones from the Highland Border Complex. Both were contemporaneous with the regressive Hawke Bay event, accounting for similarities in provenance, and further linking the Highland Border Complex to Laurentia. The Grampian terrane was being uplifted and shedding detritus throughout the Ordovician and Silurian. The absence of this event from the detrital zircon records of either the Midland Valley or Southern Upland terranes suggests that these blocks cannot have been in their current location relative to the Grampian terrane before the end of the Silurian.Supplementary material: The complete analytical dataset and cathodoluminescence images are available at http://www.geolsoc.org.uk/SUP18531.
|
|
| 30. |
- Jones, Timothy D., et al.
(author)
-
Diatom-inferred late Pleistocene and Holocene palaeolimnological changes in the Ioannina basin, northwest Greece
- 2013
-
In: Journal of Paleolimnology. - : Springer Science and Business Media LLC. - 0921-2728 .- 1573-0417. ; 49:2, s. 185-204
-
Journal article (peer-reviewed)abstract
- The character and impact of climate change since the last glacial maximum (LGM) in the eastern Mediterranean region remain poorly understood. Here, two new diatom records from the Ioannina basin in northwest Greece are presented alongside a pre-existing record and used to infer past changes in lake level, a proxy for the balance between precipitation and evaporation. Comparison of the three records indicates that lake-level fluctuations were the dominant driver of diatom assemblage composition change, whereas productivity variations had a secondary role. The reconstruction indicates low lake levels during the LGM. Late glacial lake deepening was underway by 15.0 cal kyr BP, implying that the climate was becoming wetter. During the Younger Dryas stadial, a lake-level decline is recorded, indicating arid climatic conditions. Lake Ioannina deepened rapidly in the early Holocene, but long-term lake-level decline commenced around 7.0 cal kyr BP. The pattern of lake-level change is broadly consistent with an existing lake-level reconstruction at Lake Xinias, central Greece. The timing of the apparent change, however, is different, with delayed early Holocene deepening at Xinias. This offset is attributed to uncertainties in the age models, and the position of Xinias in the rain shadow of the Pindus Mountains.
|
|
| 31. |
- Lebzelter, T., et al.
(author)
-
Comparative modelling of the spectra of cool giants
- 2012
-
In: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 547, s. A108-
-
Journal article (peer-reviewed)abstract
- Context. Our ability to extract information from the spectra of stars depends on reliable models of stellar atmospheres and appropriate techniques for spectral synthesis. Various model codes and strategies for the analysis of stellar spectra are available today. Aims. We aim to compare the results of deriving stellar parameters using different atmosphere models and different analysis strategies. The focus is set on high-resolution spectroscopy of cool giant stars. Methods. Spectra representing four cool giant stars were made available to various groups and individuals working in the area of spectral synthesis, asking them to derive stellar parameters from the data provided. The results were discussed at a workshop in Vienna in 2010. Most of the major codes currently used in the astronomical community for analyses of stellar spectra were included in this experiment. Results. We present the results from the different groups, as well as an additional experiment comparing the synthetic spectra produced by various codes for a given set of stellar parameters. Similarities and differences of the results are discussed. Conclusions. Several valid approaches to analyze a given spectrum of a star result in quite a wide range of solutions. The main causes for the differences in parameters derived by different groups seem to lie in the physical input data and in the details of the analysis method. This clearly shows how far from a definitive abundance analysis we still are.
|
|
| 32. |
- Schellenberger, Steffen, et al.
(author)
-
Release of Side-Chain Fluorinated Polymer-Containing Microplastic Fibers from Functional Textiles During Washing and First Estimates of Perfluoroalkyl Acid Emissions.
- 2019
-
In: Environmental Science and Technology. - : American Chemical Society (ACS). - 0013-936X .- 1520-5851. ; 53:24, s. 14329-14338
-
Journal article (peer-reviewed)abstract
- The quantity and composition of fibers released from functional textiles during accelerated washing were investigated using the GyroWash method. Two fabrics [polyamide (PA) and polyester/cotton (PES/CO)] were selected and coated with perfluorohexane-based side-chain fluorinated polymers. Fibers released during washing ranged from ∼10 to 500 μ with a similar distribution for the two textile types. The PA-based fabric released considerably more fibers >20 μm in length compared to the PES/CO-based fabric (>1000/GyroWash for PA vs ∼200/GyroWash fibers for PES/CO). After one GyroWash (2-15 domestic washes), fibers that contained approximately 240 and 1300 μg total fluorine per square meter (μg F/m2) were released from the PA and PES/CO fabrics, respectively. Current understanding of the fate of microplastic fibers suggests that a large fraction of these fibers reach the environment either in effluent wastewater or sewage sludge applied to land. In the environment, the fluorinated side chains will be slowly cleaved from the backbone of the side-chain fluorinated polymers coated on the fibers and then transformed into short-chain perfluoroalkyl acids. On the European scale, emissions of up to ∼0.7 t of fluorotelomer alcohol (6:2 FTOH) per year were estimated for outdoor rain jackets treated with fluorotelomer-based side-chain fluorinated polymers.
|
|
| 33. |
|
|
| 34. |
- Sheikh, U. A., et al.
(author)
-
Impact of the new TCV baffled divertor upgrade on pedestal structure and performance
- 2021
-
In: Nuclear Materials and Energy. - : Elsevier BV. - 2352-1791. ; 26
-
Journal article (peer-reviewed)abstract
- A new set of carbon tiles, neutral beam heating optics and gas baffles were installed on TCV during the baffled divertor upgrade in early 2019. The installation of the baffles allows a deconvolution of the roles of main chamber and divertor neutral pressure on the H-mode pedestal structure. This physical barrier allows relatively high neutral pressures to be constrained to the divertor, thus preventing neutrals from entering the main chamber and potentially degrading core confinement. This study presents the experimentally measured and modelled pedestal heights and structure for a series of H-mode discharges prior to and after this upgrade. Increased pedestal performance at high divertor neutral pressure was observed after the baffled divertor upgrade. This was consistent across all triangularities and outer target locations investigated and is attributed to higher pedestal top temperatures being maintained at high gas injection rates. ASTRA simulations indicated beam heating power coupled to the plasma did not significantly vary after the baffled divertor upgrade or as a function of divertor neutral gas pressure. Analysis of the pedestal structure exposed a strong correlation between pedestal performance and the density pedestal position prior to and after the baffled divertor upgrade. The baffled divertor upgrade limited the outward shift of the density pedestal, thus maintaining higher pedestal performance at high divertor neutral pressures. Stability analysis indicated the majority of discharges studied were within 25% of the stability boundary. No correlation was found between the distance from the stability boundary and pedestal performance or structure. Comparison with the EPED1 model indicated that TCV discharges do not have a fixed dependence between pedestal.... and pedestal width. A large variation in the EPED1 relating parameter was observed and found to vary with the density pedestal position.
|
|
| 35. |
- Sheikh, U. A., et al.
(author)
-
Pedestal structure and energy confinement studies on TCV
- 2019
-
In: Plasma Physics and Controlled Fusion. - : Institute of Physics Publishing (IOPP). - 0741-3335 .- 1361-6587. ; 61:1
-
Journal article (peer-reviewed)abstract
- High external gas injection rates are foreseen for future devices to reduce divertor heat loads and this can influence pedestal stability. Fusion yield has been estimated to vary as strongly as T-e,ped(2) so an understanding of the underlying pedestal physics in the presence of additional fuelling and seeding is required. To address this, a database scanning plasma triangularity, fuelling and nitrogen seeding rates in neutral beam (NBH) heated ELM-y H-mode plasmas was constructed on TCV. Low nitrogen seeding was observed to increase pedestal top pressure but all other gas injection rates led to a decrease. Lower triangularity discharges were found to be less sensitive to variations in gas injection rates. No clear trend was measured between plasma top P-e and stored energy which is attributed to the non-stiffness of core plasma pressure profiles. Peeling ballooning stability analysis put these discharges close to the ideal MHD stability boundary. A constant for D in the relation pedestal width w = D root beta(Ped)(theta), was not found. Experimentally inferred values of D were used in EPED1 simulations and gave good agreement for pedestal width. Pedestal height agreed well for high triangularity but was overestimated for low triangularity. IPED simulations showed that relative shifts in pedestal position were contributing significantly to the pedestal height and were able to reproduce the measured profiles more accurately.
|
|
| 36. |
- Wiedemeier, Daniel B., et al.
(author)
-
Characterization, Quantification and Compound-specific Isotopic Analysis of Pyrogenic Carbon Using Benzene Polycarboxylic Acids (BPCA)
- 2016
-
In: Journal of Visualized Experiments. - : MyJove Corporation. - 1940-087X. ; :111
-
Journal article (peer-reviewed)abstract
- Fire-derived, pyrogenic carbon (PyC), sometimes called black carbon (BC), is the carbonaceous solid residue of biomass and fossil fuel combustion, such as char and soot. PyC is ubiquitous in the environment due to its long persistence, and its abundance might even increase with the projected increase in global wildfire activity and the continued burning of fossil fuel. PyC is also increasingly produced from the industrial pyrolysis of organic wastes, which yields charred soil amendments (biochar). Moreover, the emergence of nanotechnology may also result in the release of PyC-like compounds to the environment. It is thus a high priority to reliably detect, characterize and quantify these charred materials in order to investigate their environmental properties and to understand their role in the carbon cycle. Here, we present the benzene polycarboxylic acid (BPCA) method, which allows the simultaneous assessment of PyC's characteristics, quantity and isotopic composition (C-13 and C-14) on a molecular level. The method is applicable to a very wide range of environmental sample materials and detects PyC over a broad range of the combustion continuum, i.e., it is sensitive to slightly charred biomass as well as high temperature chars and soot. The BPCA protocol presented here is simple to employ, highly reproducible, as well as easily extendable and modifiable to specific requirements. It thus provides a versatile tool for the investigation of PyC in various disciplines, ranging from archeology and environmental forensics to biochar and carbon cycling research.
|
|
| 37. |
|
|
| 38. |
- Bellucci, J. J., et al.
(author)
-
Tracing martian surface interactions with the triple O isotope compositions of meteoritic phosphates
- 2020
-
In: Earth and Planetary Science Letters. - : Elsevier BV. - 0012-821X .- 1385-013X. ; 531
-
Journal article (peer-reviewed)abstract
- The triple oxygen isotope compositions of phosphate grains in six martian meteorites have been measured by Secondary Ion Mass Spectrometry (SIMS) and combined together with their chlorine isotope and halogen concentrations have been used to constrain hydrosphere-lithosphere interactions on Mars. These samples include three enriched shergottites (Zagami, Roberts Massif 04262 and Larkman Nunatak 12011), one depleted shergottite (Tissint), an orthopyroxenite (Allan Hills 84001), and a regolith breccia (Northwest Africa 7533). The phosphates measured here have a range in δ18O [(18O/16O)sample/(18O/16O)Standard-1] × 103] from +1.0 to +6.8‰ and could be a result of indigenous mantle values, mixing with martian water, or replacement reactions taking place on the surface of Mars. Three samples have a Δ17O [δ17O-1000(1 + δ18O /1000)0.528-1] in equilibrium with the martian mantle (ALH 84001, Tissint, and Zagami), while three samples (LAR 12011, RBT 04262, and NWA 7533) have an elevated positive Δ17O outside of analytical uncertainty of the martian fractionation line (MFL). The phosphates in the latter group also have positive and negative δ37Cl [(37Cl/35Cl)sample/(37Cl/35Cl)standard – 1] × 103] and enrichments in halogens not seen in the rest of the sample suite. Perchlorate formation on Earth fractionates Cl in both positive and negative directions and generates a correlated positive Δ17O. Further, perchlorate has been detected in wt% amounts on the martian surface. Thus, these results strongly suggest the presence of multiple Cl isotope reservoirs on the martian surface that have interacted with the samples studied here over the last ca. 2 Ga of geologic time. The weighted average of Δ17O measurements from phosphate grains (n = 13) in NWA 7533, which are the explicit result of exchange reactions on the martian surface, yields a statistically robust mean value of 1.39 ± 0.19‰ (2σ, MSWD = 1.5, p = 0.13). This value likely represents an accurate estimate for an oxidized surface reservoir on Mars.
|
|
| 39. |
- Cawood, P. A., et al.
(author)
-
Orogenesis without collision : Stabilizing the Terra Australis accretionary orogen, eastern Australia
- 2011
-
In: Geological Society of America Bulletin. - 0016-7606 .- 1943-2674. ; 123:11-12, s. 2240-2255
-
Journal article (peer-reviewed)abstract
- The Neoproterozoic to end-Paleozoic Terra Australis orogen extended along the Gondwana margin of the paleo–Pacific Ocean, and it now provides a detailed record of orogenic activity and continental stabilization within an ongoing convergent, accretionary plate margin. New geochronological data from end-Paleozoic plutonic and volcanic rocks associated with the Gondwanide orogeny in the New England region of eastern Australia, integrated with information on the nature and timing of associated sedimentation, deformation, and metamorphism, allow resolution of a high-fidelity record of orogenesis.At the end of the Carboniferous, around 305 Ma, convergent margin magmatism, which had been active along the western margin of the New England region, terminated and was followed by a short pulse of regional compressional deformation and metamorphism, marking the commencement of the Tablelands phase of Gondwanide orogenesis. Deformation was almost immediately followed by the onset of clastic sedimentation and local calc-alkaline volcanism, dated at 293 Ma, in the extensional Barnard Basin. Emplacement of the two New England S-type granitic suites, the Bundarra and the Hillgrove suites, along with localized high-temperature, low-pressure metamorphism, was essentially contemporaneous, ranging in age from 296 to 288 Ma, and overlapped in time with I-type magmatism and the switch from regional compression to extension and Barnard Basin rifting.The Hunter-Bowen phase of the Gondwanide orogeny commenced with contractional deformation, resulting in termination of sedimentation in the Barnard Basin and regional deformation and metamorphism across New England and into the Sydney and Gunnedah basins to the west at around 265–260 Ma. Contractional loading of the Sydney and Gunnedah basins resulted in their conversion from extensional to foreland basins, which received ongoing pulses of sediment from the New England orogenic welt until 230 Ma. The Hunter-Bowen phase was associated with widespread I-type plutonism and volcanic activity in New England that ceased around 230 Ma, marking the termination of Gondwanide orogenesis.Orogenesis occurred in an evolving convergent plate-margin setting. S- and I-type magmatic activity ranging in age from ca. 300 to 230 Ma represents a stepping out of arc magmatism from the western margin of New England (prior to 305 Ma) into the preexisting arc-trench gap. There is no evidence that deformation was related to the collision of the convergent margin with a major lithospheric mass, and the widespread development of extensional basins in the eastern third of Australia in the Early Permian indicates control by phenomena acting on a continental scale, probably changing plate kinematics associated with the amalgamation of Pangea.
|
|
| 40. |
- Cioni, Lara, et al.
(author)
-
Fluorine Mass Balance, including Total Fluorine, Extractable Organic Fluorine, Oxidizable Precursors, and Target Per- and Polyfluoroalkyl Substances, in Pooled Human Serum from the Tromsø Population in 1986, 2007, and 2015
- 2023
-
In: Environmental Science and Technology. - 0013-936X .- 1520-5851. ; 57:40, s. 14849-14860
-
Journal article (peer-reviewed)abstract
- Of the thousands of per- and polyfluoroalkyl substances (PFAS) known to exist, only a small fraction (≤1%) are commonly monitored in humans. This discrepancy has led to concerns that human exposure may be underestimated. Here, we address this problem by applying a comprehensive fluorine mass balance (FMB) approach, including total fluorine (TF), extractable organic fluorine (EOF), total oxidizable precursors (TOP), and selected target PFAS, to human serum samples collected over a period of 28 years (1986, 2007, and 2015) in Tromsø, Norway. While concentrations of TF did not change between sampling years, EOF was significantly higher in 1986 compared to 2007 and 2015. The ∑12PFAS concentrations were highest in 2007 compared to 1986 and 2015, and unidentified EOF (UEOF) decreased from 1986 (46%) to 2007 (10%) and then increased in 2015 (37%). While TF and EOF were not influenced by sex, women had higher UEOF compared to men, opposite to target PFAS. This is the first FMB in human serum to include TOP, and it suggests that precursors with >4 perfluorinated carbon atoms make a minor contribution to EOF (0–4%). Additional tools are therefore needed to identify substances contributing to the UEOF in human serum.
|
|
| 41. |
|
|
| 42. |
- Ecke, Frauke, et al.
(author)
-
Spatio-temporal variation of metals and organic contaminants in bank voles (Myodes glareolus)
- 2020
-
In: Science of the Total Environment. - : Elsevier. - 0048-9697 .- 1879-1026. ; 713
-
Journal article (peer-reviewed)abstract
- Environmental contamination with metals and organic compounds is of increasing concern for ecosystem and human health. Still, our knowledge about spatial distribution, temporal changes and ecotoxicological fate of metals and organic contaminants in wildlife is limited. We studied concentrations of 69 elements and 50 organic compounds in 300 bank voles (Myodes glareolus), Europe's most common mammal, sampled in spring and autumn 2017–2018 in five monitoring areas, representing three biogeographic regions. In addition, we compared measured concentrations with previous results from bank voles sampled within the same areas in 1995–1997 and 2001. In general, our results show regional differences, but no consistent patterns among contaminants and study areas. The exception was for the lowest concentrations of organic contaminants (e.g. perfluorooctane sulfonate, PFOS), which were generally found in the northern Swedish mountain area. Concentrations of metals and organic contaminants in adults varied seasonally with most organic contaminants being higher in spring; likely induced by diet shifts but potentially also related to age differences. In addition, metal concentrations varied between organs (liver vs. kidney), age classes (juveniles vs. adults; generally higher in adults) as well as between males and females. Concentrations of chromium and nickel in kidney and liver in the northernmost mountain area were lower in 2017–2018 than in 1995–1997 and in three of four areas, lead concentrations were lower in 2017–2018 than in 2001. Current metal concentrations (except mercury) are not expected to negatively affect the voles. Concentrations of hexachlorobenzene displayed highest concentrations in 2001 in the mountains, while it was close to detection limit in 2017–2018. Likewise, PFOS concentrations decreased in the mountains and in south-central lowland forests between 2001 and 2017–2018. Our results suggest that season, age class and sex need to be considered when designing and interpreting results from monitoring programs targeting inorganic and organic contaminants in wildlife.
|
|
| 43. |
- Edwards, Lyndon, et al.
(author)
-
Worldwide activities
- 2017
-
In: Molten Salt Reactors and Thorium Energy. ; , s. 635-774
-
Book chapter (other academic/artistic)
|
|
| 44. |
|
|
| 45. |
- Frassinetti, Lorenzo, et al.
(author)
-
Role of the pedestal position on the pedestal performance in AUG, JET-ILW and TCV and implications for ITER
- 2019
-
In: Nuclear Fusion. - : Institute of Physics Publishing. - 0029-5515 .- 1741-4326. ; 59:7
-
Journal article (peer-reviewed)abstract
- The role of the pedestal position on the pedestal performance has been investigated in AUG, JET-ILW and TCV. When the pedestal is peeling-ballooning (PB) limited, the three machines show a similar behaviour. The outward shift of the pedestal density relative to the pedestal temperature can lead to the outward shift of the pedestal pressure which, in turns, reduces the PB stability, degrades the pedestal confinement and reduces the pedestal width. Once the experimental density position is considered, the EPED model is able to correctly predict the pedestal height. An estimate of the impact of the density position on a ITER baseline scenario shows that the maximum reduction in the pedestal height is 10% while the reduction in the fusion power is between 10% and 40% depending on the assumptions for the core transport model used. In other plasmas, where the pedestal density is shifted even more outwards relative to the pedestal temperature, the pedestal does not seem PB limited and a different behaviour is observed. The outward shift of the density is still empirically correlated with the pedestal degradation but no change in the pressure position is observed and the PB model is not able to correctly predict the pedestal height. On the other hand, the outward shift of the density leads to a significant increase of η e and η i (where η e,i is the ratio of density to temperature scale lengths, ) which leads to the increase of the growth rate of microinstabilities (mainly ETG and ITG) by 50%. This suggests that, in these plasmas, the increase in the turbulent transport due to the outward shift of the density might play an important role in the decrease of the pedestal performance.
|
|
| 46. |
|
|
| 47. |
- Gierga, Merle, et al.
(author)
-
Purification of fire derived markers for mu g scale isotope analysis (delta C-13, Delta C-14) using high performance liquid chromatography (HPLC)
- 2014
-
In: Organic Geochemistry. - : Elsevier BV. - 0146-6380 .- 1873-5290. ; 70, s. 1-9
-
Journal article (peer-reviewed)abstract
- Black carbon (BC) is the residue of incomplete biomass combustion. It is ubiquitous in nature and, due to its relative persistence, is an important factor in Earth's slow-cycling carbon pool. This resistant nature makes pure BC one of the most used materials for C-14 dating to elucidate its formation date or residence time in the environment. However, most BC samples cannot be physically separated from their matrices, precluding accurate C-14 values. Here we present a method for radiocarbon dating of the oxidation products of BC, benzene polycarboxylic acids, thereby circumventing interference from extraneous carbon. Individual compounds were isolated using high performance liquid chromatography (HPLC) and converted to CO2 via wet chemical oxidation for C-13 and C-14 isotope analysis. A detailed assessment was performed to identify and quantify sources of extraneous carbon contamination using two process standards with distinct isotopic signatures. The average blank was 1.6 +/- 0.7 mu g C and had an average radiocarbon content of 0.90 +/- 0.50 (FC)-C-14. We successfully analyzed the C-14 content of individual benzene polycarboxylic acids with a sample size as small as 20-30 mu g C after correcting for the presence of the average blank. The combination of delta C-13 and (FC)-C-14 analysis helps interpret the results and enables monitoring of extraneous carbon contribution in a fast and cost efficient way. Such a molecular approach to radiocarbon dating of BC residues enables the expansion of isotopic BC studies to samples that have either been too small or strongly affected by non-fire derived carbon.
|
|
| 48. |
- Gonzalez de Vega, Raquel, et al.
(author)
-
A multi-platform approach for the comprehensive analysis of per- and polyfluoroalkyl substances (PFAS) and fluorine mass balance in commercial ski wax products
- 2024
-
In: Analytica Chimica Acta. - : Elsevier B.V.. - 0003-2670 .- 1873-4324. ; 1314
-
Journal article (peer-reviewed)abstract
- The unique properties of per- and polyfluoroalkyl substances (PFAS) have led to their extensive use in consumer products, including ski wax. Based on the risks associated with PFAS, and to align with PFAS regulations, the international ski federation (FIS) implemented a ban on products containing “C8 fluorocarbons/perfluorooctanoate (PFOA)” at all FIS events from the 2021/2022 season, leading manufactures to shift their formulations towards short-chain PFAS chemistries. To date, most studies characterising PFAS in ski waxes have measured a suite of individual substances using targeted analytical approaches. However, the fraction of total fluorine (TF) in the wax accounted for by these substances remains unclear. In this study, we sought to address this question by applying a multi-platform, fluorine mass balance approach to a total of 10 commercially available ski wax products. Analysis of TF by combustion ion chromatography (CIC) revealed concentrations of 1040–51700 μg F g−1 for the different fluorinated waxes. In comparison, extractable organic fluorine (EOF) determined in methanol extracts by CIC (and later confirmed by inductively-coupled plasma-mass spectrometry and 19F- nuclear magnetic resonance spectroscopy) ranged from 92 to 3160 μg g−1, accounting for only 3–8.8 % of total fluorine (TF). Further characterisation of extracts by cyclic ion mobility-mass spectrometry (IMS) revealed 15 individual PFAS with perfluoroalkyl carboxylic acid concentrations up to 33 μg F g−1, and 3 products exceeding the regulatory limit for PFOA (0.025 μg g−1) by a factor of up to 100. The sum of all PFAS accounted for only 0.01–1.0 % of EOF, implying a high percentage of unidentified PFAS, thus, pyrolysis gas chromatography-mass spectrometry was used to provide evidence of the nature of the non-extractable fluorine present in the ski wax products.
|
|
| 49. |
- Gyllenhammar, Irina, et al.
(author)
-
Levels of perfluoroalkyl substances (PFAS) in individual serum samples from first-time mothers in Uppsala, Sweden: results from year 2017-2019, and temporal trends for the time period 1996-2019
- 2020
-
Reports (other academic/artistic)abstract
- Sedan 1996 har Livsmedelsverket regelbundet samlat in blodprover från förstföderskor i Uppsala för analys av persistenta halogenerade organiska miljöföroreningar (POP). Poly- och perfluorerade alkylsyror (PFAS) är en sådan substansgrupp. I vårt projekt undersöks bland annat hur exponering för PFAS har förändrats sedan stora ändringar i produktion av kemikalierna skett runt millennieskiftet. I följande rapport redovisas halter av PFAS i serum från förstföderskor provtagna 2017-2019 samt tidstrender för perioden 1996-2019. PFOS förekommer i högst halt i serum följt av PFHxS och PFOA. Hälften av förstföderskorna, provtagna 2017-2019, hade serumhalter över den nivå hos mammor som är önskvärd för att skydda barnet mot hög exponering under foster- och amningsperioden, fastställd av EFSA 2020. Serumhalter av PFUnDA har ökat cirka 2 % per år under hela studieperioden, medan det för PFNA observerades en ökning av halter fram till omkring år 2008 och därefter sjunker halterna. På grund av dricksvattenföroreningar av PFAS har serumhalterna av PFBS och PFHxS ökat hos förstföderskorna från Uppsala. Efter år 2010-2011 har halterna i serum börjat minska (change-point year), vilket överensstämmer med att åtgärder för att sänka halten PFAS i dricksvattnet har satts in sedan föroreningen upptäcktes i juli 2012. Resultaten visar att storskalig utfasning av PFOS och PFOA internationellt har resulterat i minskande exponering i befolkningen och serumhalterna minskade årligen med 5 % för PFOA och 9 % för PFOS under studieperioden i Uppsala. Kvinnor med högst utbildning (mer än 3 år eftergymnasial utbildning) hade 10-70 % högre PFAA-halter än kvinnor med lägst utbildning (gymnasieskola). Störst skillnad observerades för PFBS och PFHxS som till viss del sannolikt beror på att kvinnor med högst utbildning i högre grad bott inne i Uppsala stad och därigenom fått högre exponering via dricksvattnet, än kvinnor med lägst utbildning som bott längre från stadskärnan. Serumhalterna av flera av de långkedjiga karboxylsyrorna minskade med 1-3 % per enhetsökning av BMI, vilket antyder att överviktiga kvinnor hade något lägre halter av dessa PFAA än kvinnor med lågt BMI. Det är viktigt att fortsätta följa trender av PFAS i POPUP för att se om exponeringen fortsätter att minska, och för de ämnen som inte visar någon nedåtgående trend om nivåerna kommer att plana ut för att sedan minska.
|
|
| 50. |
- Gyllenhammar, Irina, et al.
(author)
-
Levels of poly- and perfluoroalkyl substances (PFAS) in individual serum samples from first-time mothers in Uppsala, Sweden: results from year 2020-2022, and temporal trends for the time period 1996-2022
- 2023
-
Reports (other academic/artistic)abstract
- Sedan 1996 har Livsmedelsverket regelbundet samlat in blodprover från förstföderskor i Uppsala för analys av persistenta organiska miljöföroreningar (POP). Poly- och perfluorerade alkylsyror (PFAS) är en sådan substansgrupp. I följande rapport redovisas halter av PFAS i serum från förstföderskor provtagna 2020-2022 samt tidstrender för perioden 1996-2022. PFOS förekommer i högst halt i serum följt av PFHxS och PFOA. Ca 60 % av förstföderskorna, provtagna 2020-2022, hade serumhalter över den nivå som är önskvärd hos mammor för att skydda barnet mot hög exponering under foster- och amningsperioden. Resultaten visar att storskalig utfasning runt millenniumskiftet av PFOS och PFOA internationellt har resulterat i minskande exponering i befolkningen. Från 2000/2001 minskade halterna först årligen med 13 % för PFOS och 7 % för PFOA fram till år 2010, därefter har minskningen gått långsammare, i medeltal 5 % under perioden 2011-2022. På grund av dricksvattenföroreningar av PFAS i Uppsala har serumhalterna av PFHxS ökat i början av studien hos förstföderskorna. Halterna låg som högst 2004-2011. Efter 2012, då åtgärder sattes in för att sänka halten PFAS i dricksvattnet har halterna i serum minskat med i medeltal 10 % per år. För PFNA, PFDA och PFUnDA sågs en ökande trend av serumhalter i början av studien fram till 2006-2008 men därefter sjunker halterna med i medeltal 2-4 % per år. Kvinnor med högst utbildning (mer än 3 år eftergymnasial utbildning) hade högre PFAS-halter än kvinnor med lägst utbildning (gymnasieskola). Störst skillnad observerades för PFHxS som till viss del sannolikt beror på att kvinnor med högst utbildning i högre grad bott inne i Uppsala stad och därigenom fått högre exponering via dricksvattnet, än kvinnor med lägst utbildning som bott längre från stadskärnan. Serumhalterna ökade med 1-2 % per år i ökande ålder för alla PFAS utom PFOA och PFDA, vilket antyder att äldre kvinnor hade något högre halter av dessa PFAS än yngre kvinnor. Det är viktigt att fortsätta följa trender av PFAS i POPUP för att se om exponeringen fortsätter att minska,
|
|
