1. |
|
|
2. |
- Löfstedt, Håkan, 1963-, et al.
(author)
-
Respiratory and Ocular Symptoms Among Employees at Swedish Indoor Swimming Pools
- 2016
-
In: Journal of Occupational and Environmental Medicine. - : Lippincott Williams & Wilkins. - 1076-2752 .- 1536-5948. ; 58:12, s. 1190-1195
-
Journal article (peer-reviewed)abstract
- Background: This study investigated trichloramine exposure and prevalence of respiratory and ocular symptoms among Swedish indoor swimming pool workers.Methods: Questionnaires were distributed to pool workers and referents. Lung function and fraction of exhaled nitric oxide (FeNO) were measured before and after work. Exposure to trichloramine and trihalomethanes was measured over work shifts.Results: The mean personal trichloramine exposure was 36g/m(3). Significantly more exposed workers reported ocular and nasal symptoms. There were significant differences between groups in FeNO change following work, with exposed showing increased FeNO, which grew when analyses included only nonsmokers.Conclusions: The findings indicate that indoor swimming pool environments may have irritating effects on mucous membranes. FeNO data also indicate an inflammatory effect on central airways, but the clinical relevance is unclear. Low trichloramine levels found in this study were not associated with health effects.
|
|
3. |
- Zhang, Renyun, et al.
(author)
-
Soap-film coating : High-speed deposition of multilayer nanofilms
- 2013
-
In: Scientific Reports. - Nature Publishing Group : Springer Science and Business Media LLC. - 2045-2322. ; 3, s. Art. no. 1477-
-
Journal article (peer-reviewed)abstract
- The coating of thin films is applied in numerous fields and many methods are employed for the deposition of these films. Some coating techniques may deposit films at high speed; for example, ordinary printing paper is coated with micrometre-thick layers of clay at a speed of tens of meters per second. However, to coat nanometre thin films at high speed, vacuum techniques are typically required, which increases the complexity of the process. Here, we report a simple wet chemical method for the high-speed coating of films with thicknesses at the nanometre level. This soap-film coating technique is based on forcing a substrate through a soap film that contains nanomaterials. Molecules and nanomaterials can be deposited at a thickness ranging from less than a monolayer to several layers at speeds up to meters per second. We believe that the soap-film coating method is potentially important for industrial-scale nanotechnology.
|
|
4. |
- Abdipour, Morteza, et al.
(author)
-
A Design Research Lab—An Integrated Model to Identify Conscious and Unconscious Behavior in the Design Process
- 2016
-
In: Advances in Design for Inclusion. - Cham : Springer. - 9783319419619 - 9783319419626
-
Conference paper (peer-reviewed)abstract
- To understand how different design solutions affect users, designers traditionally use different evaluation methods that mainly rely on conscious feedback from the users. However, the complexity of human behaviour, where a large part is unconscious, point to a need for an extended tool box addressing the part not accessible to human conscious knowledge. Here, we describe a design research lab where traditional methods are complemented with tools to measure physiological signals influenced by emotional and sympathetic responses. These tools include galvanic skin response (GSR), electrocardiograph (ECG), and electroencephalograph (EEG). Typical sessions with acquired data of conscious and unconscious user reactions are described. The large body of data collected, which also require non-design expertise for interpretation, suggest that a further development towards simplified output data of the unconscious reactions is needed to allow wider use within industrial design work.
|
|
5. |
- Alarco, J A, et al.
(author)
-
Early stages of growth of YBa2Cu3O7− high Tc superconducting films on (001) Y-ZrO2 substrates
- 1994
-
In: Journal of Applied Physics. - : AIP Publishing. - 0021-8979 .- 1089-7550. ; 75, s. 3202-3204
-
Journal article (peer-reviewed)abstract
- Theearly stages of growth of high quality YBa2Cu3O7− (YBCO) filmsgrown on (001) Y-ZrO2 (YSZ) substrates by pulsed laser depositionhave been studied using a combination of atomic force microscopyand transmission electron microscopy. A one unit cell thick YBCOlayer and relatively large CuO particles formed in the initialstages. Additional YBCO grew on top of the first layerin the form of one or a few unit cellhigh c-axis oriented islands about 30 nm in diameter. Therounded islands subsequently coalesced into faceted domains. Elongated Y2BaCuO5 particlesnucleated after the first layer of YBCO. A highly texturedBaZrO3 layer formed between the YSZ and the YBCO witha cube-on-cube dominant orientation relationship with respect to the YBCOfilm. Journal of Applied Physics is copyrighted by The American Institute of Physics.
|
|
6. |
- Alecrim, Viviane, et al.
(author)
-
Exfoliated Layered Materials for Digital Fabrication
- 2015
-
In: NIP & Digital Fabrication Conference. ; , s. 192-194
-
Conference paper (peer-reviewed)abstract
- We introduced an exfoliation method of MoS2 in a 3% solution of sodium dodecyl surfactant at high concentration (i.e. 2 g/L). The bulk MoS2 was thinned by mechanical exfoliation between sand papers and the resulting powder was used to prepare dispersions by liquid exfoliation through probe sonication. The resulting dispersion consisted of very thin MoS2 nanosheets in surfactant solution with average lateral size around 126 nm. This may be interesting for applications in inkjet printed electronics.
|
|
7. |
|
|
8. |
|
|
9. |
- Almstrand, Ann-Charlotte, et al.
(author)
-
An explorative study on respiratory health among operators working in polymer additive manufacturing
- 2023
-
In: Frontiers in Public Health. - : Frontiers Media S.A.. - 2296-2565. ; 11
-
Journal article (peer-reviewed)abstract
- Additive manufacturing (AM), or 3D printing, is a growing industry involving a wide range of different techniques and materials. The potential toxicological effects of emissions produced in the process, involving both ultrafine particles and volatile organic compounds (VOCs), are unclear, and there are concerns regarding possible health implications among AM operators.The objective of this study was to screen the presence of respiratory health effects among people working with liquid, powdered, or filament plastic materials in AM. MethodsIn total, 18 subjects working with different additive manufacturing techniques and production of filament with polymer feedstock and 20 controls participated in the study. Study subjects filled out a questionnaire and underwent blood and urine sampling, spirometry, impulse oscillometry (IOS), exhaled NO test (FeNO), and collection of particles in exhaled air (PEx), and the exposure was assessed. Analysis of exhaled particles included lung surfactant components such as surfactant protein A (SP-A) and phosphatidylcholines. SP-A and albumin were determined using ELISA. Using reversed-phase liquid chromatography and targeted mass spectrometry, the relative abundance of 15 species of phosphatidylcholine (PC) was determined in exhaled particles. The results were evaluated by univariate and multivariate statistical analyses (principal component analysis). ResultsExposure and emission measurements in AM settings revealed a large variation in particle and VOC concentrations as well as the composition of VOCs, depending on the AM technique and feedstock. Levels of FeNO, IOS, and spirometry parameters were within clinical reference values for all AM operators. There was a difference in the relative abundance of saturated, notably dipalmitoylphosphatidylcholine (PC16:0_16:0), and unsaturated lung surfactant lipids in exhaled particles between controls and AM operators. ConclusionThere were no statistically significant differences between AM operators and controls for the different health examinations, which may be due to the low number of participants. However, the observed difference in the PC lipid profile in exhaled particles indicates a possible impact of the exposure and could be used as possible early biomarkers of adverse effects in the airways.
|
|
10. |
- Andersson, Henrik, et al.
(author)
-
Assembling surface mounted components on ink-jet printed double sided paper circuit board
- 2014
-
In: Nanotechnology. - : IOP Publishing. - 0957-4484 .- 1361-6528. ; 25:9
-
Journal article (peer-reviewed)abstract
- Printed electronics is a rapidly developing field where many components can already be manufactured on flexible substrates by printing or by other high speed manufacturing methods. However, the functionality of even the most inexpensive microcontroller or other integrated circuit is, at the present time and for the foreseeable future, out of reach by means of fully printed components. Therefore, it is of interest to investigate hybrid printed electronics, where regular electrical components are mounted on flexible substrates to achieve high functionality at a low cost. Moreover, the use of paper as a substrate for printed electronics is of growing interest because it is an environmentally friendly and renewable material and is, additionally, the main material used for many packages in which electronics functionalities could be integrated. One of the challenges for such hybrid printed electronics is the mounting of the components and the interconnection between layers on flexible substrates with printed conductive tracks that should provide as low a resistance as possible while still being able to be used in a high speed manufacturing process. In this article, several conductive adhesives are evaluated as well as soldering for mounting surface mounted components on a paper circuit board with ink-jet printed tracks and, in addition, a double sided Arduino compatible circuit board is manufactured and programmed.
|
|