1. |
- Bilde, M., et al.
(author)
-
Saturation Vapor Pressures and Transition Enthalpies of Low-Volatility Organic Molecules of Atmospheric Relevance: From Dicarboxylic Acids to Complex Mixtures
- 2015
-
In: Chemical Reviews. - : American Chemical Society (ACS). - 0009-2665 .- 1520-6890. ; 115:10, s. 4115-4156
-
Research review (peer-reviewed)abstract
- There are a number of techniques that can be used that differ in terms of whether they fundamentally probe the equilibrium and the temperature range over which they can be applied. The series of homologous, straight-chain dicarboxylic acids have received much attention over the past decade given their atmospheric relevance, commercial availability, and low saturation vapor pressures, thus making them ideal test compounds. Uncertainties in the solid-state saturation vapor pressures obtained from individual methodologies are typically on the order of 50-100%, but the differences between saturation vapor pressures obtained with different methods are approximately 1-4 orders of magnitude, with the spread tending to increase as the saturation vapor pressure decreases. Some of the dicarboxylic acids can exist with multiple solid-state structures that have distinct saturation vapor pressures. Furthermore, the samples on which measurements are performed may actually exist as amorphous subcooled liquids rather than solid crystalline compounds, again with consequences for the measured saturation vapor pressures, since the subcooled liquid phase will have a higher saturation vapor pressure than the crystalline solid phase. Compounds with equilibrium vapor pressures in this range will exhibit the greatest sensitivities in terms of their gas to particle partitioning to uncertainties in their saturation vapor pressures, with consequent impacts on the ability of explicit and semiexplicit chemical models to simulate secondary organic aerosol formation.
|
|
2. |
- Ahlberg, Erik, et al.
(author)
-
"Vi klimatforskare stödjer Greta och skolungdomarna"
- 2019
-
In: Dagens nyheter (DN debatt). - 1101-2447.
-
Journal article (pop. science, debate, etc.)abstract
- DN DEBATT 15/3. Sedan industrialiseringens början har vi använt omkring fyra femtedelar av den mängd fossilt kol som får förbrännas för att vi ska klara Parisavtalet. Vi har bara en femtedel kvar och det är bråttom att kraftigt reducera utsläppen. Det har Greta Thunberg och de strejkande ungdomarna förstått. Därför stödjer vi deras krav, skriver 270 klimatforskare.
|
|
3. |
- Ali, Neserin, et al.
(author)
-
Comprehensive proteome analysis of nasal lavage samples after controlled exposure to welding nanoparticles shows an induced acute phase and a nuclear receptor, LXR/RXR, activation that influence the status of the extracellular matrix
- 2018
-
In: Clinical Proteomics. - : Springer Science and Business Media LLC. - 1542-6416 .- 1559-0275. ; 15:1
-
Journal article (peer-reviewed)abstract
- Background: Epidemiological studies have shown that many welders experience respiratory symptoms. During the welding process a large number of airborne nanosized particles are generated, which might be inhaled and deposited in the respiratory tract. Knowledge of the underlying mechanisms behind observed symptoms is still partly lacking, although inflammation is suggested to play a central role. The aim of this study was to investigate the effects of welding fume particle exposure on the proteome expression level in welders suffering from respiratory symptoms, and changes in protein mediators in nasal lavage samples were analyzed. Such mediators will be helpful to clarify the pathomechanisms behind welding fume particle-induced effects. Methods: In an exposure chamber, 11 welders with work-related symptoms in the lower airways during the last month were exposed to mild-steel welding fume particles (1 mg/m3) and to filtered air, respectively, in a double-blind manner. Nasal lavage samples were collected before, immediately after, and the day after exposure. The proteins in the nasal lavage were analyzed with two different mass spectrometry approaches, label-free discovery shotgun LC-MS/MS and a targeted selected reaction monitoring LC-MS/MS analyzing 130 proteins and four in vivo peptide degradation products. Results: The analysis revealed 30 significantly changed proteins that were associated with two main pathways; activation of acute phase response signaling and activation of LXR/RXR, which is a nuclear receptor family involved in lipid signaling. Connective tissue proteins and proteins controlling the degradation of such tissues, including two different matrix metalloprotease proteins, MMP8 and MMP9, were among the significantly changed enzymes and were identified as important key players in the pathways. Conclusion: Exposure to mild-steel welding fume particles causes measurable changes on the proteome level in nasal lavage matrix in exposed welders, although no clinical symptoms were manifested. The results suggested that the exposure causes an immediate effect on the proteome level involving acute phase proteins and mediators regulating lipid signaling. Proteases involved in maintaining the balance between the formation and degradation of extracellular matrix proteins are important key proteins in the induced effects.
|
|
4. |
- Andersen, Christina, et al.
(author)
-
Emissions of soot, PAHs, ultrafine particles, NOx, and other health relevant compounds from stressed burning of candles in indoor air
- 2021
-
In: Indoor Air. - : Hindawi Limited. - 0905-6947 .- 1600-0668. ; 31:6, s. 2033-2048
-
Journal article (peer-reviewed)abstract
- Burning candles release a variety of pollutants to indoor air, some of which are of concern for human health. We studied emissions of particles and gases from the stressed burning of five types of pillar candles with different wax and wick compositions. The stressed burning was introduced by controlled fluctuating air velocities in a 21.6 m3 laboratory chamber. The aerosol physicochemical properties were measured both in well-mixed chamber air and directly above the candle flame with online and offline techniques. All candles showed different emission profiles over time with high repeatability among replicates. The particle mass emissions from stressed burning for all candle types were dominated by soot (black carbon; BC). The wax and wick composition strongly influenced emissions of BC, PM2.5 , and particle-phase polycyclic aromatic hydrocarbons (PAHs), and to lower degree ultrafine particles, inorganic and organic carbon fraction of PM, but did not influence NOx , formaldehyde, and gas-phase PAHs. Measurements directly above the flame showed empirical evidence of short-lived strong emission peaks of soot particles. The results show the importance of including the entire burn time of candles in exposure assessments, as their emissions can vary strongly over time. Preventing stressed burning of candles can reduce exposure to pollutants in indoor air.
|
|
5. |
- Andersen, Christina, et al.
(author)
-
Inhalation and dermal uptake of particle and gas phase phthalates - A human chamber exposure study
- 2018
-
In: 15th Conference of the International Society of Indoor Air Quality and Climate, INDOOR AIR 2018. - 9781713826514
-
Conference paper (peer-reviewed)abstract
- We have exposed sixteen test subjects to particle and gas phase phthalates in the controlled chamber exposure study. Deuterium labelled phthalates were used to generate particle D4-DEHP (di(2-ethylhexyl) phthalate) and gas phase D4-DEP (diethyl phthalate) for exposures scenarios allowed studying the dermal only and combined inhalational and dermal uptake. Metabolites were measured in urine samples before and after three hours of exposure. The inhalation was the dominant route of uptake for both DEHP and DEP in this study design and exposure settings. Larger uptake of DEP compared to DEHP both via inhalation and dermal uptake was observed. Dermal uptake of DEHP was not observed in this study. Inhalational urinary excretion factors of the metabolites were found to be 0.73 for DEHP and 0.53 for DEP. This study also highlights the importance of taking into consideration the deposited dose of inhaled particles in studies of uptake of particles.
|
|
6. |
- Andersen, Christina, et al.
(author)
-
Inhalation and Dermal Uptake of Particle and Gas-phase Phthalates - A Human Exposure Study
- 2018
-
In: Environmental Science & Technology. - : American Chemical Society (ACS). - 1520-5851 .- 0013-936X. ; 52:21, s. 12792-12800
-
Journal article (peer-reviewed)abstract
- Phthalates are ubiquitous in indoor environments, which raises concern about their endocrine disrupting properties. However, studies of human uptake from airborne exposure are limited. We studied the inhalation uptake and dermal uptake by air-to-skin transfer with clean clothing as a barrier of two deuterium-labelled airborne phthalates: particle-phase D4-DEHP (di-(2-ethylhexyl)phthalate) and gas-phase D4-DEP (diethyl phthalate). Sixteen participants, wearing trousers and long-sleeved shirts, were under controlled conditions exposed to airborne phthalates in four exposure scenarios: dermal uptake alone, and combined inhalation+dermal uptake of both phthalates. The results showed an average uptake of D4-DEHP by inhalation of 0.0014±0.00088 (µg kg-1 bw)/(µg m-3)/h. No dermal uptake of D4-DEHP was observed during the 3 hour exposure with clean clothing. The deposited dose of D4-DEHP accounted for 26% of the total inhaled D4-DEHP mass. For D4-DEP, the average uptake by inhalation+dermal was 0.0067±0.0045 and 0.00073±0.00051 (µg kg-1 bw)/(µg m-3)/h for dermal uptake. Urinary excretion factors of metabolites after inhalation were estimated to 0.69 for D4-DEHP and 0.50 for D4-DEP. Under the described settings, the main uptake of both phthalates was through inhalation. The results demonstrate the differences in uptake of gas and particles, and highlights the importance of considering the deposited dose in particle uptake studies.
|
|
7. |
- Arinaitwe, Evalyne, et al.
(author)
-
Firefighter’s exposures : Preliminary study on fire gases from burning ‘new’ and sustainable building materials
- 2024
-
In: ; , s. 93-94
-
Conference paper (peer-reviewed)abstract
- Firefighters are exposed to harmful and toxic substances during firefighting activities (i.e. training, live firefighting and overhaul) in building fires. This paper studies the impact of ‘new’ and sustainable materials (‘green’ buildings) on firefighter’s exposures during firefighting interventions. Cross-laminated wood (CLT), recycled wood material (referred to as ‘RECOMA’ in this paper) and glass fiberreinforced polymer (FRP) were burned in the cone calorimeter and the gasses produced quantified using Fourier Transform Infrared (FTIR) spectroscopy. Results show that many different fire gases are produced beyond the common gas analysis of oxygen, carbon monoxide and carbon dioxide by standard fire testing equipment. The presence of benzene and formaldehyde which are associated with increased risk for cancers in humans, indicates the need for better understanding of fire gases from such new materials in order to continually ensure the proper protection of firefighters.
|
|
8. |
|
|
9. |
|
|
10. |
- Bendtsen, Katja Maria, et al.
(author)
-
Particle characterization and toxicity in C57BL/6 mice following instillation of five different diesel exhaust particles designed to differ in physicochemical properties
- 2020
-
In: Particle and Fibre Toxicology. - : Springer Science and Business Media LLC. - 1743-8977. ; 17:1
-
Journal article (peer-reviewed)abstract
- BACKGROUND: Diesel exhaust is carcinogenic and exposure to diesel particles cause health effects. We investigated the toxicity of diesel exhaust particles designed to have varying physicochemical properties in order to attribute health effects to specific particle characteristics. Particles from three fuel types were compared at 13% engine intake O2 concentration: MK1 ultra low sulfur diesel (DEP13) and the two renewable diesel fuels hydrotreated vegetable oil (HVO13) and rapeseed methyl ester (RME13). Additionally, diesel particles from MK1 ultra low sulfur diesel were generated at 9.7% (DEP9.7) and 17% (DEP17) intake O2 concentration. We evaluated physicochemical properties and histopathological, inflammatory and genotoxic responses on day 1, 28, and 90 after single intratracheal instillation in mice compared to reference diesel particles and carbon black. RESULTS: Moderate variations were seen in physical properties for the five particles: primary particle diameter: 15-22 nm, specific surface area: 152-222 m2/g, and count median mobility diameter: 55-103 nm. Larger differences were found in chemical composition: organic carbon/total carbon ratio (0.12-0.60), polycyclic aromatic hydrocarbon content (1-27 μg/mg) and acid-extractable metal content (0.9-16 μg/mg). Intratracheal exposure to all five particles induced similar toxicological responses, with different potency. Lung particle retention was observed in DEP13 and HVO13 exposed mice on day 28 post-exposure, with less retention for the other fuel types. RME exposure induced limited response whereas the remaining particles induced dose-dependent inflammation and acute phase response on day 1. DEP13 induced acute phase response on day 28 and inflammation on day 90. DNA strand break levels were not increased as compared to vehicle, but were increased in lung and liver compared to blank filter extraction control. Neutrophil influx on day 1 correlated best with estimated deposited surface area, but also with elemental carbon, organic carbon and PAHs. DNA strand break levels in lung on day 28 and in liver on day 90 correlated with acellular particle-induced ROS. CONCLUSIONS: We studied diesel exhaust particles designed to differ in physicochemical properties. Our study highlights specific surface area, elemental carbon content, PAHs and ROS-generating potential as physicochemical predictors of diesel particle toxicity.
|
|
11. |
|
|
12. |
- Bladh, Henrik, et al.
(author)
-
Influence of Soot Particle Aggregation on Time-Resolved Laser-Induced Incandescence Signals
- 2011
-
In: Applied Physics B. - : Springer Science and Business Media LLC. - 0946-2171 .- 1432-0649. ; 104:2, s. 331-341
-
Journal article (peer-reviewed)abstract
- Laser-induced incandescence (LII) is a versatile technique for quantitative soot measurements in flames and exhausts. When used for particle sizing, the time-resolved signals are analysed as these will show a decay rate dependent on the soot particle size. Such an analysis has traditionally been based on the assumption of isolated primary particles. However, soot particles in flames and exhausts are usually aggregated, which implies loss of surface area, less heat conduction and hence errors in estimated particle sizes. In this work we present an experimental investigation aiming to quantify this effect. A soot generator, based on a propane diffusion flame, was used to produce a stable soot stream and the soot was characterised by transmission electron microscopy (TEM), a scanning mobility particle sizer (SMPS) and an aerosol particle mass analyzer coupled in series after a differential mobility analyzer (DMA-APM). Despite nearly identical primary particle size distributions for three selected operating conditions, LII measurements resulted in signal decays with significant differences in decay rate. However, the three cases were found to have quite different levels of aggregation as shown both in TEM images and mobility size distributions, and the results agree qualitatively with the expected effect of diminished heat conduction from aggregated particles resulting in longer LII signal decays. In an attempt to explain the differences quantitatively, the LII signal dependence on aggregation was modelled using a heat and mass transfer model for LII given the primary particle and aggregate size distribution data as input. Quantitative agreement was not reached and reasons for this discrepancy are discussed.
|
|
13. |
|
|
14. |
|
|
15. |
|
|
16. |
|
|
17. |
- Bohgard, Mats, et al.
(author)
-
Pedagogisk förändring av arbetsvetenskapskurser i några olika utbildningsprogram vid LTH
- 2003
-
In: Pedagogisk inspirationskonferens LTH 27 maj 2003. - Lund : Lunds tekniska högskola, Lunds universitet. ; , s. 14-17
-
Conference paper (peer-reviewed)abstract
- Vi har genomfört genomgripande förändringar i obligatoriska grundkurser i arbetsvetenskap. Förändringarna har genomförts som en utvecklingsprocess i vilken samtliga lärare som deltagit i kurserna har medverkat. Processen startade med konsulthjälp från Universitetspedagogiskt centrum vid Lunds universitet, fortsatte med kompetensutveckling av oss själva och följdes av några utvecklingsprojekt, varefter från grunden förändrade kurser genomfördes under fyra år. Den nya uppläggningen medförde att vi fick positiva attityder i studentenkäterna när det gällde två av kurserna i årskurs 2 i vilken medodiken genomfördes fullständigt. I en kurs, som gavs i årskurs 1 och i vilken den nya uppläggningen endast delvis genomfördes blev studentattityderna negativa.
|
|
18. |
|
|
19. |
- Bolling, Anette Kocbach, et al.
(author)
-
Health effects of residential wood smoke particles : the importance of combustion conditions and physicochemical particle properties
- 2009
-
In: Particle and Fibre Toxicology. - London : BioMed Central (BMC). - 1743-8977. ; 6
-
Research review (peer-reviewed)abstract
- Background: Residential wood combustion is now recognized as a major particle source in many developed countries, and the number of studies investigating the negative health effects associated with wood smoke exposure is currently increasing. The combustion appliances in use today provide highly variable combustion conditions resulting in large variations in the physicochemical characteristics of the emitted particles. These differences in physicochemical properties are likely to influence the biological effects induced by the wood smoke particles.Outline: The focus of this review is to discuss the present knowledge on physicochemical properties of wood smoke particles from different combustion conditions in relation to wood smoke-induced health effects. In addition, the human wood smoke exposure in developed countries is explored in order to identify the particle characteristics that are relevant for experimental studies of wood smoke-induced health effects. Finally, recent experimental studies regarding wood smoke exposure are discussed with respect to the applied combustion conditions and particle properties.Conclusion: Overall, the reviewed literature regarding the physicochemical properties of wood smoke particles provides a relatively clear picture of how these properties vary with the combustion conditions, whereas particle emissions from specific classes of combustion appliances are less well characterised. The major gaps in knowledge concern; (i) characterisation of the atmospheric transformations of wood smoke particles, (ii) characterisation of the physicochemical properties of wood smoke particles in ambient and indoor environments, and (iii) identification of the physicochemical properties that influence the biological effects of wood smoke particles.
|
|
20. |
|
|
21. |
|
|
22. |
|
|
23. |
|
|
24. |
|
|
25. |
|
|
26. |
|
|
27. |
- Dierschke, Katrin, et al.
(author)
-
Acute respiratory effects and biomarkers of inflammation due to welding-derived nanoparticle aggregates
- 2017
-
In: International Archives of Occupational and Environmental Health. - : Springer Science and Business Media LLC. - 0340-0131 .- 1432-1246. ; 90:5, s. 451-463
-
Journal article (peer-reviewed)abstract
- Welders are exposed to airborne particles from the welding environment and often develop symptoms work-related from the airways. A large fraction of the particles from welding are in the nano-size range. In this study we investigate if the welders' airways are affected by exposure to particles derived from gas metal arc welding in mild steel in levels corresponding to a normal welding day. In an exposure chamber, 11 welders with and 10 welders without work-related symptoms from the lower airways and 11 non-welders without symptoms, were exposed to welding fumes (1 mg/m(3)) and to filtered air, respectively, in a double-blind manner. Symptoms from eyes and upper and lower airways and lung function were registered. Blood and nasal lavage (NL) were sampled before, immediately after and the morning after exposure for analysis of markers of oxidative stress. Exhaled breath condensate (EBC) for analysis of leukotriene B4 (LT-B4) was sampled before, during and immediately after exposure. No adverse effects of welding exposure were found regarding symptoms and lung function. However, EBC LT-B4 decreased significantly in all participants after welding exposure compared to filtered air. NL IL-6 increased immediately after exposure in the two non-symptomatic groups and blood neutrophils tended to increase in the symptomatic welder group. The morning after, neutrophils and serum IL-8 had decreased in all three groups after welding exposure. Remarkably, the symptomatic welder group had a tenfold higher level of EBC LT-B4 compared to the two groups without symptoms. Despite no clinical adverse effects at welding, changes in inflammatory markers may indicate subclinical effects even at exposure below the present Swedish threshold limit (8 h TWA respirable dust).
|
|
28. |
- Dutcher, Dabrina D., et al.
(author)
-
Emissions from soy biodiesel blends: A single particle perspective
- 2011
-
In: Atmospheric Environment. - : Elsevier BV. - 1352-2310. ; 45:20, s. 3406-3413
-
Journal article (peer-reviewed)abstract
- Biodiesel has recently reemerged as a common fuel. However, emissions from biodiesel combustion have been studied in much less detail than those from traditional petroleum-based diesel. In this experiment, emissions from the combustion of different fuel blends (BOO, B02, B20, B99, where the number after B indicates the percentage, by volume, of biodiesel in the fuel) in a VW TDi engine were analyzed by aerosol time-of-flight mass spectrometers (ATOFMS) for single-particle composition and vacuum aerodynamic size. The ATOFMS results show that the PAH molecular weight distribution is not significantly affected by the fuel composition, and that sulfates are reduced by increased biodiesel content. Octanedioic acid (a carbonyl species) is increased with increased biodiesel concentration. Clustering results from the single-particle spectra show that the particles fall in five main types by chemical composition. The aerodynamic size distribution of these individual clusters was also determined. These results also show that methods used to identify diesel particle emissions for source apportionment are not applicable when significant concentrations of biodiesel are used in fuels. (C) 2011 Elsevier Ltd. All rights reserved.
|
|
29. |
|
|
30. |
|
|
31. |
- Eriksson, Axel Christian, et al.
(author)
-
Influence of airborne particles' chemical composition on SVOC uptake from PVC flooring - time resolved analysis with aerosol mass spectrometry
- 2020
-
In: Environmental Science & Technology. - : American Chemical Society (ACS). - 1520-5851 .- 0013-936X. ; , s. 85-91
-
Journal article (peer-reviewed)abstract
- We sampled ammonium sulfate particles and indoor particles of outdoor origin through a small chamber covered with polyvinyl chloride (PVC) flooring. We measured the uptake of semi-volatile organic compounds (SVOC) by the airborne particles in real time. The particles acquired SVOC mass fractions up to 10%. The phthalate ester DEHP (di(2-ethylhexyl)phthalate), a known endocrine disruptor, contributed by approximately half of the sorbed SVOC mass. The indoor particles acquired higher DEHP fraction than laboratory generated ammonium sulfate aerosol. We attribute this increased uptake to absorption by organic matter present in the indoor particles. Using a thermodenuder to remove volatile components, predominantly organics, reduced SVOC uptake. Positive matrix factorization applied to the organic mass spectra suggests that hydrocarbon-like organic aerosol (typically fresh traffic exhaust) sorbs DEHP more efficiently than aged organic aerosol. SVOC uptake is one of the processes that modifies outdoor pollution particles after they penetrate buildings, where the majority of exposure occurs. Particles from indoor sources, typically dominated by organic matter, will undergo such processes as well. Aerosol mass spectrometry improves the time resolution of experimental investigations into these processes, and enables experiments with lower, relevant particle concentrations. Additionally, particle size resolved results are readily obtained.
|
|
32. |
|
|
33. |
- Eriksson, Axel C., et al.
(author)
-
The role of organic fraction of aerosol particles in uptake of indoor SVOC investigated with real time aerosol mass spectrometry
- 2018
-
In: 15th Conference of the International Society of Indoor Air Quality and Climate, INDOOR AIR 2018. - 9781713826514
-
Conference paper (peer-reviewed)abstract
- We investigate the uptake of the Di(2-ethylhexyl) phthalate (DEHP) by laboratory generated and ambient aerosol particles passing through a 1.2 liter chamber covered with vinyl flooring on its internal surfaces. We found approximately five times more efficient DEHP uptake on a mass basis by organic particles (ambient particles) compared to laboratory generated salt particles. The increased uptake is likely due to increased adsorption by pre-existing organic aerosol, which is abundant in the ambient aerosol particles. This implies that compounds with adverse health outcomes are added to particles in indoor air after infiltration into buildings via gas-to-particle conversion of indoor generated SVOCs. We show that aerosol mass spectrometry is a suitable tool for highly time-resolved investigations of this process.
|
|
34. |
|
|
35. |
- Eriksson, Axel, et al.
(author)
-
Diesel soot aging in urban plumes within hours under cold dark and humid conditions
- 2017
-
In: Scientific Reports. - : Springer Science and Business Media LLC. - 2045-2322.
-
Journal article (peer-reviewed)abstract
- Fresh and aged diesel soot particles have different impacts on climate and human health. While fresh diesel soot particles are highly aspherical and non-hygroscopic, aged particles are spherical and hygroscopic. Aging and its effect on water uptake also controls the dispersion of diesel soot in the atmosphere. Understanding the timescales on which diesel soot ages in the atmosphere is thus important, yet knowledge thereof is lacking. We show that under cold, dark and humid conditions the atmospheric transformation from fresh to aged soot occurs on a timescale of less than five hours. Under dry conditions in the laboratory, diesel soot transformation is much less efficient. While photochemistry drives soot aging, our data show it is not always a limiting factor. Field observations together with aerosol process model simulations show that the rapid ambient diesel soot aging in urban plumes is caused by coupled ammonium nitrate formation and water uptake.
|
|
36. |
|
|
37. |
|
|
38. |
- Eriksson, Axel, et al.
(author)
-
Particulate PAH Emissions from Residential Biomass Combustion : Time-Resolved Analysis with Aerosol Mass Spectrometry
- 2014
-
In: Environmental Science and Technology. - : American Chemical Society (ACS). - 0013-936X .- 1520-5851. ; 48:12, s. 7143-7150
-
Journal article (peer-reviewed)abstract
- Time-resolved emissions of particulate polycyclic aromatic hydrocarbons (PAHs) and total organic particulate matter (OA) from a wood log stove and an adjusted pellet stove were investigated with high-resolution time-of-flight aerosol mass spectrometry (AMS). The highest OA emissions were found during the addition of log wood on glowing embers, that is, slow burning pyrolysis conditions. These emissions contained about 1% PAHs (of OA). The highest PAH emissions were found during fast burning under hot air starved combustion conditions, in both stoves. In the latter case, PAHs contributed up to 40% of OA, likely due to thermal degradation of other condensable species. The distribution of PAHs was also shifted toward larger molecules in these emissions. AMS signals attributed to PAHs were found at molecular weights up to 600 Da. The vacuum aerodynamic size distribution was found to be bimodal with a smaller mode (Dva ~ 200 nm) dominating under hot air starved combustion and a larger sized mode dominating under slow burning pyrolysis (Dva ~ 600 nm). Simultaneous reduction of PAHs, OA and total particulate matter from residential biomass combustion may prove to be a challenge for environmental legislation efforts as these classes of emissions are elevated at different combustion conditions.
|
|
39. |
|
|
40. |
|
|
41. |
|
|
42. |
|
|
43. |
|
|
44. |
- Falk, John, et al.
(author)
-
Immersion freezing ability of freshly emitted soot with various physico-chemical characteristics
- 2021
-
In: Atmosphere. - : MDPI AG. - 2073-4433. ; 12:9
-
Journal article (peer-reviewed)abstract
- The immersion freezing ability of soot particles has in previous studies been reported in the range of low/insignificant to very high. The aims of this study were to: (i) perform detailed physico-chemical characterisation of freshly produced soot particles with very different properties, (ii) investigate the immersion freezing ability of the same particles, and (iii) investigate the potential links between physico-chemical particle properties and ice-activity. A miniCAST soot generator was used to produce eight different soot samples representing a wide range of physico-chemical properties. A continuous flow diffusion chamber was used to study each sample online in immersion mode over the temperature (T) range from −41 to −32◦C, at a supersaturation of about 10% with respect to liquid water. All samples exhibited low to no heterogeneous immersion freezing. The most active sample reached ice-activated fractions (AF) of 10−3 and 10−4 at temperatures of 1.7 and 1.9 K, respectively, above the homogeneous freezing temperature. The samples were characterized online with respect to a wide range of physico-chemical properties including effective particle density, optical properties, particle surface oxidation and soot maturity. We did observe indications of increasing immersion freezing ice-activity with increasing effective particle density and increasing particulate PAH fraction . Hence, those properties, or other properties co-varying with those, could potentially enhance the immersion freezing ice-activity of the studied soot particle types. However, we found no significant correlation between the physico-chemical properties and the observed ice-nucleating ability when the particle ensemble was extended to include previously published results including more ice-active biomass combustion soot particles. We conclude that it does not appear possible in general and in any straightforward way to link observed soot particle physico-chemical properties to the ice-nucleating ability using the online instrumentation included in this study. Furthermore, our observations support that freshly produced soot particles with a wide range of physico-chemical properties have low to insignificant immersion freezing ice-nucleating ability.
|
|
45. |
|
|
46. |
|
|
47. |
|
|
48. |
- Gallo, Yann, et al.
(author)
-
Investigation of Late-Cycle Soot Oxidation Using Laser Extinction and In-Cylinder Gas Sampling at Varying Inlet Oxygen Concentrations in Diesel Engines
- 2017
-
In: Fuel. - : Elsevier BV. - 1873-7153 .- 0016-2361. ; 193, s. 308-314
-
Journal article (peer-reviewed)abstract
- This study focuses on the relative importance of O2 and OH as oxidizers of soot during the late cycle in diesel engines, where the soot oxidation is characterized in an optically accessible engine using laser extinction measurements. These are combined with in cylinder gas sampling data from a single cylinder engine fitted with a fast gas sampling valve. Both measurements confirm that the in-cylinder soot oxidation slows down when the inlet concentration of O2 is reduced. A 38% decrease in intake O2 concentration reduces the soot oxidation rate by 83%, a non-linearity suggesting that O2 in itself is not the main soot oxidizing species. Chemical kinetics simulations of OH concentrations in the oxidation zone and estimates of the OH soot oxidation rates point towards OH being the dominant oxidizer.
|
|
49. |
- Gren, Louise, et al.
(author)
-
Effect of renewable fuels and intake O2 concentration on diesel engine emission characteristics and reactive oxygen species (ROS) formation
- 2020
-
In: Atmosphere. - : MDPI AG. - 2073-4433. ; 11:6
-
Journal article (peer-reviewed)abstract
- Renewable diesel fuels have the potential to reduce net CO2 emissions, and simultaneously decrease particulate matter (PM) emissions. This study characterized engine-out PM emissions and PM-induced reactive oxygen species (ROS) formation potential. Emissions from a modern heavy-duty diesel engine without external aftertreatment devices, and fueled with petroleum diesel, hydrotreated vegetable oil (HVO) or rapeseed methyl ester (RME) biodiesel were studied. Exhaust gas recirculation (EGR) allowed us to probe the effect of air intake O2 concentration, and thereby combustion temperature, on emissions and ROS formation potential. An increasing level of EGR (decreasing O2 concentration) resulted in a general increase of equivalent black carbon (eBC) emissions and decrease of NOx emissions. At a medium level of EGR (13% intake O2), eBC emissions were reduced for HVO and RME by 30 and 54% respectively compared to petroleum diesel. In general, substantially lower emissions of polycyclic aromatic hydrocarbons (PAHs), including nitro and oxy-PAHs, were observed for RME compared to both HVO and diesel. At low-temperature combustion (LTC, O2 < 10%), CO and hydrocarbon gas emissions increased and an increased fraction of refractory organic carbon and PAHs were found in the particle phase. These altered soot properties have implications for the design of aftertreatment systems and diesel PM measurements with optical techniques. The ROS formation potential per mass of particles increased with increasing engine O2 concentration intake. We hypothesize that this is because soot surface properties evolve with the combustion temperature and become more active as the soot matures into refractory BC, and secondly as the soot surface becomes altered by surface oxidation. At 13% intake O2, the ROS-producing ability was high and of similar magnitude per mass for all fuels. When normalizing by energy output, the lowered emissions for the renewable fuels led to a reduced ROS formation potential.
|
|
50. |
- Gren, Louise, et al.
(author)
-
Effects of renewable fuel and exhaust aftertreatment on primary and secondary emissions from a modern heavy-duty diesel engine
- 2021
-
In: Journal of Aerosol Science. - : Elsevier BV. - 0021-8502. ; 156
-
Journal article (peer-reviewed)abstract
- Compared to petroleum diesel, renewable diesel fuels and exhaust aftertreatment systems can reduce primary exhaust emissions that are hazardous to human health and the environment. Secondary aerosol emissions which form upon atmospheric processing have, however, been less studied. This study aimed to quantify the impacts of replacing petroleum diesel with renewable fuels (hydrotreated vegetable oil [HVO] and rapeseed methyl ester [RME]) on primary and secondary aerosol emissions from a heavy-duty diesel engine at different stages of an exhaust aftertreatment system. Emission characterization was obtained by combining a battery of physical characterization techniques with chemical characterization using aerosol mass spectrometry. At engine-out measurements, RME and HVO reduced primary particulate matter (PM) emissions (for example equivalent black carbon [eBC]) and secondary aerosol production (studied with an oxidation flow reactor [OFR]) by mass compared to petroleum diesel. The diesel oxidation catalyst (DOC) reduced primary nucleation mode emissions, reduced the effective density of soot mode emissions, and reduced secondary particle production by mass. The DOC + a diesel particulate filter removed >99% of the particle number and eBC emissions. Volatile PM emissions (for example organic aerosol) were found to be distributed between the nucleation mode and soot mode for both primary and secondary emissions, to a degree that depends on both fuel type and aftertreatment. A high mass concentration of condensable species and a low condensation sink in the soot mode led to increased fractions of condensable species present in the nucleation mode. Aging in the OFR led to increases in particle effective density. Motoring the engine (running without combustion) showed that the nucleation mode originated primarily from lubricating oil, and nonvolatile nanoparticle emissions were identified down to 1.2 nm in particle size. In conclusion, replacing petroleum diesel with HVO and RME changes emission characteristics and can help reduce key aerosol emissions of relevance for adverse health and climate impact, especially for diesel engines with no or limited exhaust aftertreatment.
|
|