Sökning: onr:"swepub:oai:DiVA.org:hv-12274" >
Influence of Surfac...
-
Tamil Alagan, Nageswaran,1990-Högskolan Väst,Avdelningen för avverkande och additativa tillverkningsprocesser (AAT),PTW,University West
(författare)
Influence of Surface Features for Increased Heat Dissipation on Tool Wear
- Artikel/kapitelEngelska2018
Förlag, utgivningsår, omfång ...
-
2018-04-25
-
MDPI AG,2018
-
printrdacarrier
Nummerbeteckningar
-
LIBRIS-ID:oai:DiVA.org:hv-12274
-
https://urn.kb.se/resolve?urn=urn:nbn:se:hv:diva-12274URI
-
https://doi.org/10.3390/ma11050664DOI
-
https://research.chalmers.se/publication/503099URI
-
https://research.chalmers.se/publication/502902URI
Kompletterande språkuppgifter
-
Språk:engelska
-
Sammanfattning på:engelska
Ingår i deldatabas
Klassifikation
-
Ämneskategori:ref swepub-contenttype
-
Ämneskategori:art swepub-publicationtype
Anmärkningar
-
Funders: EDS
-
The critical problems faced during the machining process of heat resistant superalloys, (HRSA), is the concentration of heat in the cutting zone and the difficulty in dissipating it. The concentrated heat in the cutting zone has a negative influence on the tool life and surface quality of the machined surface, which in turn, contributes to higher manufacturing costs. This paper investigates improved heat dissipation from the cutting zone on the tool wear through surface features on the cutting tools. Firstly, the objective was to increase the available surface area in high temperature regions of the cutting tool. Secondly, multiple surface features were fabricated for the purpose of acting as channels in the rake face to create better access for the coolant to the proximity of the cutting edge. The purpose was thereby to improve the cooling of the cutting edge itself, which exhibits the highest temperature during machining. These modified inserts were experimentally investigated in face turning of Alloy 718 with high-pressure coolant. Overall results exhibited that surface featured inserts decreased flank wear, abrasion of the flank face, cutting edge deterioration and crater wear probably due to better heat dissipation from the cutting zone.
Ämnesord och genrebeteckningar
Biuppslag (personer, institutioner, konferenser, titlar ...)
-
Beno, TomasHögskolan Väst,Avdelningen för avverkande och additativa tillverkningsprocesser (AAT),PTW,University West(Swepub:hv)ttb
(författare)
-
Hoier, Philipp,1988Chalmers University of Technology, Department of Industrial and Materials Science, SE-412 96 Gothenburg, Sweden,Chalmers tekniska högskola(Swepub:cth)hoierp
(författare)
-
Klement, Uta,1962Chalmers University of Technology, Department of Industrial and Materials Science, SE-412 96 Gothenburg, Sweden,Chalmers tekniska högskola(Swepub:cth)uk
(författare)
-
Wretland, AndersGKN Aerospace Engine Systems AB, SE-461 81 Trollhättan, Sweden,GKN Aerospace Sweden AB
(författare)
-
Högskolan VästAvdelningen för avverkande och additativa tillverkningsprocesser (AAT)
(creator_code:org_t)
Sammanhörande titlar
-
Ingår i:Materials: MDPI AG11:51996-1944
Internetlänk
Hitta via bibliotek
Till lärosätets databas