Weld metal mechanical properties in hyperbaric GTAW of X70 pipeline

• In the present investigation, 2 different wires for hyperbaric (underwater) GTA (gas tungsten arc) welding of X70 pipelines have been tested with respect to their weld metal mechanical properties. Welding of full coupons at different pressures (seawater depths of 16, 75 and 200 msw) was done with subsequent weld metal chemical analyses, hardness measurements, tensile testing and Charpy V notch testing as well as microstructure characterization. It is shown that both wires satisfied strength requirements set to X70 grade, representing a weld metal overmatch situation. Both wires gave sufficient impact toughness, but the toughness of the Ni-Mo containing weld was reduced with increasing seawater depth. This observation was strongly linked to the positioning of the Charpy V notch, and crack growth in a brittle, partially transformed region as a consequence of reheating by subsequent stringer beads. The embrittling microstructure consisted of high carbon MA (martensite-austenite constituents islands) decorating prior austenite grain boundaries. This microstructure was less pronounced when welding with the high Ni wire, which may explain why no similar toughness drop was found.

Keyword

hyperbaric welding

subsea pipelines

X70 steel

Ni- and Ni-Mo consumables

mechanical properties

toughness

MA microstructure constituents

carbon microalloyed steels

heat-affected zone

Publication and Content Type

ref (subject category)

art (subject category)