onr:"swepub:oai:DiVA.org:kth-92183"
Search: onr:"swepub:oai:DiVA.org:kth-92183" > Experimental studie...
- 1 of 1
- Previous record
- Next record
- To hitlist
- Saha, Ranjan,1984-KTH,Kraft- och värmeteknologi (author)
Experimental studies of leading edge contouring influence on secondary losses in transonic turbines
- Article/chapterEnglish2012
Publisher, publication year, extent ...
- ASME Press,2012
- printrdacarrier
Numbers
- LIBRIS-ID:oai:DiVA.org:kth-92183
- https://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-92183URI
- https://doi.org/10.1115/GT2012-68497DOI
Supplementary language notes
- Language:English
- Summary in:English
Part of subdatabase
- SwePubSwePub
Classification
Notes
- QC 20130115
- An experimental study of the hub leading edge contouring using fillets is performed in an annular sector cascade to observe the influence of secondary flows and aerodynamic losses. The investigated vane is a three dimensional gas turbine guide vane (geometrically similar) with a mid-span aspect ratio of 0.46. The measurements are carried out on the leading edge fillet and baseline cases using pneumatic probes. Significant precautions have been taken to increase the accuracy of the measurements. The investigations are performed for a wide range of operating exit Mach numbers from 0.5 to 0.9 at a design inlet flow angle of 90°. Data presented include the loading, fields of total pressures, exit flow angles, radial flow angles, as well as profile and secondary losses. The vane has a small profile loss of approximately 2.5 % and secondary loss of about 1.1%. Contour plots of vorticity distributions and velocity vectors indicate there is a small influence of the vortex-structure in endwall regions when the leading edge fillet is used. Compared to the baseline case the loss for the filleted case is lower up to 13 % of span and higher from 13% to 20 % of the span for a reference condition with Mach no. of 0.9. For the filleted case, there is a small increase of turning up to 15 % of the span and then a small decrease up to 35 % of the span. Hence, there are no significant influences on the losses and turning for the filleted case. Results lead to the conclusion that one cannot expect a noticeable effect of leading edge contouring on the aerodynamic efficiency for the investigated 1st stage vane of a modern gas turbine.
Subject headings and genre
- TEKNIK OCH TEKNOLOGIER Maskinteknik Energiteknik hsv//swe
- ENGINEERING AND TECHNOLOGY Mechanical Engineering Energy Engineering hsv//eng
- Aerodynamic efficiency
- Aerodynamic loss
- Experimental studies
- Reference condition
- Transonic turbine
- Turbine guide vane
- Velocity vectors
- Vorticity distribution
Added entries (persons, corporate bodies, meetings, titles ...)
- Fridh, JensKTH,Kraft- och värmeteknologi(Swepub:kth)u1ouhj7i (author)
- Fransson, TorstenKTH,Kraft- och värmeteknologi(Swepub:kth)u1yzxi2t (author)
- Mamaev, BorisSiemens LLC Energy Oil & Gas Design Department, Russia (author)
- Annerfeldt, MatsSiemens Industrial Turbomachinery AB, Finspång, Sweden (author)
- KTHKraft- och värmeteknologi (creator_code:org_t)
Related titles
- In:ASME Turbo Expo 2012: ASME Press, s. 1109-11199780791844748
Internet link
Find in a library
- ASME Turbo Expo 2012 (Search for host publication in LIBRIS)
To the university's database
- 1 of 1
- Previous record
- Next record
- To hitlist
Find more in SwePub
- By the author/editor
- Saha, Ranjan, 19 ...
- Fridh, Jens
- Fransson, Torste ...
- Mamaev, Boris
- Annerfeldt, Mats
- About the subject
-
- ENGINEERING AND TECHNOLOGY
- ENGINEERING AND ...
- and Mechanical Engin ...
- and Energy Engineeri ...
- Articles in the publication
- ASME Turbo Expo ...
- By the university
- Royal Institute of Technology
Search outside SwePub
- Extend your search to:
- Google Book Search
- Google Scholar
Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.
- Copyright © LIBRIS - National Library Systems
- LIBRIS.kb.se
