Sökning: onr:"swepub:oai:DiVA.org:liu-99841" >
Fatigue Strength of...
Fatigue Strength of Machined and Shot Peened Grey Cast Iron : Influence of Graphite Morphology
-
- Lundberg, Mattias (författare)
- Linköpings universitet,Konstruktionsmaterial,Tekniska högskolan
-
- Peng, Ru (författare)
- Linköpings universitet,Konstruktionsmaterial,Tekniska högskolan
-
- Ahmad, Maqsood (författare)
- Base Engine & Materials Technology, Volvo Powertrain, Gothenburg, Sweden
-
visa fler...
-
- Bäckström, Daniel (författare)
- Testing Methods and Testing, Scania CV AB, Södertälje, Sweden
-
- Vuoristo, Taina (författare)
- Testing Methods and Testing, Scania CV AB, Södertälje, Sweden
-
- Johansson, Sten (författare)
- Linköpings universitet,Konstruktionsmaterial,Tekniska högskolan
-
visa färre...
-
(creator_code:org_t)
- 2013
- Engelska.
- Relaterad länk:
-
https://urn.kb.se/re...
Abstract
Ämnesord
Stäng
- A common opinion is that cast iron, especially grey cast iron, is not as notch sensitive as steel and has therefore not been treated by shot peening to suppress crack initiation. For a heterogeneous material that also is brittle, just like grey cast iron, the shot peening parameters needed to induce beneficial surface residual stresses can be problematic to identify. Fatigue testing under uniaxial loading with an R value of -1, on mechanically polished and shot peened specimens, has been performed to determine the fatigue strength at 107 cycles as well as complete Wöhler-curves. Two different types of specimen geometries were tested, one smooth and one notched specimen having kt equal to 1.05 resp. 1.33. With large shots and high peening intensity (heavy shot peening) the fatigue strength clearly decreased whereas small shots and low peening intensity (gentle shot peening) might have lowered the fatigue strength. A short annealing at 285° after gentle shot peening increased the fatigue strength. The results are discussed and explained based on x-ray diffraction measurements, i.e. residual stress and full width at half maximum profiles, as well as microstructural investigations using scanning electron microscope (SEM).
Ämnesord
- TEKNIK OCH TEKNOLOGIER -- Materialteknik (hsv//swe)
- ENGINEERING AND TECHNOLOGY -- Materials Engineering (hsv//eng)
Nyckelord
- Fatigue strength
- grey cast iron
- residual stresses
- shot peening
Publikations- och innehållstyp
- vet (ämneskategori)
- ovr (ämneskategori)