Benzene conversion using a partial combustion approach in a packed bed reactor

• This study investigates the partial combustion technique for tar conversion using a modified experimental set up comprising a packed bed reactor with bed-inside probe for air supply. Simulated producer gas (SPG) and benzene were selected as a real producer gas alternative and model tar component respectively. The benzene conversion was investigated under different experimental conditions such as reactor temperature (650–900 °C), packed bed height (0–12 cm), residence time (1.2–1.9 s), air fuel ratio (0.2 and 0.3) and SPG composition. The results showed insignificant effect of temperature over benzene conversion while air fuel ratio of 0.3 caused high benzene conversion than at 0.2. Absence of packed bed lead high benzene conversion of 90% to polyaromatic hydrocarbons (PAHs) compared to similar low PAHs free benzene conversion of 32% achieved at both packed heights. In SPG composition effect, H2 and CH4 had a substantial inverse effect on benzene conversion. An increase in H2 concentration from 12 to 24 vol% increased the benzene conversion from 26 to 45% while an increase in CH4 concentration from 7 to 14 vol% reduced the benzene conversion from 28 to 4%. However, other SPG components had insignificant impacts on benzene conversion.

Subject headings

TEKNIK OCH TEKNOLOGIER  -- Kemiteknik -- Kemiska processer (hsv//swe)

ENGINEERING AND TECHNOLOGY  -- Chemical Engineering -- Chemical Process Engineering (hsv//eng)

Keyword

Partial combustion

Gasification

Tar

Simulated producer gas

Sustainable Built Environment

Hållbar byggd miljö

Publication and Content Type

ref (subject category)

art (subject category)