Funktionsprovning av tätskiktsystem för våtutrymmen 2022

• Functional testing of waterproofing systems for use behind ceramic tiling based on flexible sheets 2022 This research project is a repetition of previously completed projects. These projects span a long period of time, 12 years. The projects were completed during the period 2010 to 2022. Functional testing The result is better than before. 2022 2019 (1) 2016 (2) 2014 (3) 2010 (4) Result Result Result Result Result Result No leakage 9 (47 %) 6 (32 %) 8 (40 %) 3 (15 %) 0 (0 %) Leakage 10 (53 %) 13 (68 %) 12 (60 %) 17 (85 %) 5 (100 %) In this investigation, most of the leaks are located to penetrations of large and small sewer pipes. In this investigation, we have on several occasions seen that the pipe sleeves have had substandard quality. This has manifested itself in the fact that the polymeric material which is to seal around the pipe during the test has lost its sealing ability. It is probable that the material has developed a residual deformation (settling) which means that the material has lost its ability to seal around the pipe. We have also noticed that pipe cuffs have delaminated, the layers in the cuff during the test have been divided into their components. Leakage has also occurred at inner corners, outer corners and at chafing. Only a few, two, leaks at connections to floor drains have been noted. Better yet, none of the examined waterproofing systems showed leaks that were so extensive that one can speak of a total damage. Water vapour resistance and mass per unit area The vast majority of investigated waterproofing foils have a water vapour resistance of between 2.5 and 4.5 million s m, which is a high or very high value. Results for five waterproofing foils fall below 2.5 million s / m. Based on the determinations of water vapor resistance and basis weight, it can be concluded that probably six of the waterproofing suppliers have developed new or changed foils since the last survey. The trend of wanting to make thinner foils seems to have been broken. Most of the waterproofing foils have a higher vapor passage resistance now than in the previous survey. It is also noteworthy that the PVC sealing layer has a low water vapor passage resistance. The waterproofing foil has basically the same basis weight now compared to the previous survey. Indication of long-term properties To obtain an indication of the amount of added antioxidants that improve the long-term properties of the materials, DSC analyses of the waterproofing foils have been performed. Compared with the previous study, the induction temperatures are at about the same level as before, only small differences occur. The average induction temperature for all polyethylene films is 216 ° C and, in summary, the materials appear to be stabilized at the same level as the previous study. In the same way as in the survey, 2016, most materials seem to be more stabilized for long-term use compared with the previous study, 2014. However, for all analysed materials, to make a reliable service life prediction of the material, a more comprehensive aging study is recommended

Subject headings

TEKNIK OCH TEKNOLOGIER  -- Samhällsbyggnadsteknik -- Husbyggnad (hsv//swe)

ENGINEERING AND TECHNOLOGY  -- Civil Engineering -- Building Technologies (hsv//eng)

Keyword

Functional test

waterproofing system

wet room

Publication and Content Type

vet (subject category)

rap (subject category)