Search: onr:"swepub:oai:lup.lub.lu.se:8dc3a3f9-8a4b-4b39-96b3-f286e5bfa9c3" >
Hybrid Modelling of...
Hybrid Modelling of Homogeneous Charge Compression Ignition (HCCI) Engine Dynamics—A Survey
-
Bengtsson, J. (author)
-
Strandh, P. (author)
-
- Johansson, Rolf (author)
- Lund University,Lunds universitet,Institutionen för reglerteknik,Institutioner vid LTH,Lunds Tekniska Högskola,Department of Automatic Control,Departments at LTH,Faculty of Engineering, LTH
-
show more...
-
- Tunestål, Per (author)
- Lund University,Lunds universitet,Förbränningsmotorer,Institutionen för energivetenskaper,Institutioner vid LTH,Lunds Tekniska Högskola,Combustion Engines,Department of Energy Sciences,Departments at LTH,Faculty of Engineering, LTH
-
- Johansson, Bengt (author)
- Lund University,Lunds universitet,Förbränningsmotorer,Institutionen för energivetenskaper,Institutioner vid LTH,Lunds Tekniska Högskola,Combustion Engines,Department of Energy Sciences,Departments at LTH,Faculty of Engineering, LTH
-
show less...
-
(creator_code:org_t)
- Informa UK Limited, 2007
- 2007
- English.
-
In: International Journal of Control. - : Informa UK Limited. - 0020-7179 .- 1366-5820. ; 80:11, s. 1814-1848
- Related links:
-
http://dx.doi.org/10...
-
show more...
-
https://lup.lub.lu.s...
-
https://doi.org/10.1...
-
show less...
Abstract
Subject headings
Close
- The Homogeneous charge compression ignition (HCCI) principle holds promise to increase efficiency and to reduce emissions from internal combustion engines. As HCCI combustion lacks direct ignition timing control and auto-ignition depends on the operating condition, control of auto-ignition is necessary. Since auto-ignition of a homogeneous mixture is very sensitive to operating conditions, a fast combustion phasing control is necessary for reliable operation. To this purpose, HCCI modelling and model-based control with experimental validation were studied. A six-cylinder heavy-duty HCCI engine was controlled on a cycle-to-cycle basis in real time using a variety of sensors, actuators and control structures for control of the HCCI combustion in comparison. Combustion phasing control based on ion current was compared to feedback control based on cylinder pressure. With several actuators for controlling HCCI engines suggested, two actuators were compared, dual fuel and variable valve actuation (VVA). Model-based control synthesis requiring dynamic models of low complexity and HCCI combustion models were estimated by system identification and by physical modelling the physical models aiming at describing the major thermodynamic and chemical interactions in the course of an engine stroke and their influence on combustion phasing. The models identified by system identification were used to design model-predictive control (MPC) with several desirable features and today applicable to relatively fast systems, the MPC control results being compared to PID control results. Both control of the combustion phasing and control of load-torque with simultaneous minimization of the fuel consumption and emissions, while satisfying the constraints on cylinder pressure, were included.
Subject headings
- TEKNIK OCH TEKNOLOGIER -- Maskinteknik -- Annan maskinteknik (hsv//swe)
- ENGINEERING AND TECHNOLOGY -- Mechanical Engineering -- Other Mechanical Engineering (hsv//eng)
- TEKNIK OCH TEKNOLOGIER -- Elektroteknik och elektronik -- Reglerteknik (hsv//swe)
- ENGINEERING AND TECHNOLOGY -- Electrical Engineering, Electronic Engineering, Information Engineering -- Control Engineering (hsv//eng)
Publication and Content Type
- art (subject category)
- ref (subject category)
Find in a library
To the university's database