SwePub
Sök i LIBRIS databas

  Utökad sökning

onr:"swepub:oai:DiVA.org:kth-47427"
 

Sökning: onr:"swepub:oai:DiVA.org:kth-47427" > Fabrication of high...

  • Fischer, Andreas C.KTH,Mikrosystemteknik (författare)

Fabrication of high aspect ratio through silicon vias (TSVs) by magnetic assembly of nickel wires

  • Artikel/kapitelEngelska2011

Förlag, utgivningsår, omfång ...

  • IEEE,2011
  • electronicrdacarrier

Nummerbeteckningar

  • LIBRIS-ID:oai:DiVA.org:kth-47427
  • https://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-47427URI
  • https://doi.org/10.1109/MEMSYS.2011.5734356DOI

Kompletterande språkuppgifter

  • Språk:engelska
  • Sammanfattning på:engelska

Ingår i deldatabas

Klassifikation

  • Ämneskategori:ref swepub-contenttype
  • Ämneskategori:kon swepub-publicationtype

Anmärkningar

  • © 2011 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. QC 20111110
  • Three-dimensional (3D) integration of electronics and/or MEMS-based transducers is an emerging technology that vertically interconnects stacked dies using through silicon vias (TSVs). They enable the realization of devices with shorter signal lengths, smaller packages and lower parasitic capacitances, which can result in higher performance and lower costs of the system. This paper presents a novel low-cost fabrication technique for solid metal-filled TSVs using nickel wires as conductive path. The wires are placed in the via hole of a silicon wafer by magnetic self-assembly. This metal filling technique enables through-wafer vias with high aspect ratios and potentially eliminates characteristic cost drivers of the TSV production such as metallization processes, wafer thinning and general issues associated with thin-wafer handling.

Ämnesord och genrebeteckningar

  • 3D integration;Ni;Si;conductive path;electronics and-or MEMS-based transducer;high aspect ratio through silicon via fabrication;low-cost fabrication technique;lower parasitic capacitance;magnetic self-assembly;metal filling technique;metallization process;nickel wire;shorter signal length;solid metal-filled TSV;thin-wafer handling;three-dimensional integration;through-wafer via;vertically interconnect stacked die;electronics packaging;integrated circuit interconnections;integrated circuit metallisation;microfabrication;micromechanical devices;nickel;silicon;three-dimensional integrated circuits;wires;

Biuppslag (personer, institutioner, konferenser, titlar ...)

  • Roxhed, NiclasKTH,Mikrosystemteknik(Swepub:kth)u1k8t8gc (författare)
  • Haraldsson, TommyKTH,Mikrosystemteknik(Swepub:kth)u1ohdrr6 (författare)
  • Heinig, Nora (författare)
  • Stemme, GöranKTH,Mikrosystemteknik(Swepub:kth)u1oyebfq (författare)
  • Niklaus, FrankKTH,Mikrosystemteknik(Swepub:kth)u1bcu8r2 (författare)
  • KTHMikrosystemteknik (creator_code:org_t)

Sammanhörande titlar

  • Ingår i:Micro Electro Mechanical Systems (MEMS), 2011 IEEE 24th International Conference on: IEEE, s. 37-409781424496327

Internetlänk

Hitta via bibliotek

Till lärosätets databas

Sök utanför SwePub

Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.

 
pil uppåt Stäng

Kopiera och spara länken för att återkomma till aktuell vy