Sökning: onr:"swepub:oai:DiVA.org:lnu-97266" >
Automatic detection...
Automatic detection of pith location along norway spruce timber boards on the basis of optical scanning
-
- Habite, Tadios (författare)
- Linnéuniversitetet,Institutionen för byggteknik (BY)
-
- Olsson, Anders, 1973- (författare)
- Linnéuniversitetet,Institutionen för byggteknik (BY)
-
- Oscarsson, Jan, 1958- (författare)
- Linnéuniversitetet,Institutionen för byggteknik (BY)
-
(creator_code:org_t)
- 2020-07-16
- 2020
- Engelska.
-
Ingår i: European Journal of Wood and Wood Products. - : Springer. - 0018-3768 .- 1436-736X. ; 78, s. 1061-1074
- Relaterad länk:
-
https://doi.org/10.1...
-
visa fler...
-
https://lnu.diva-por... (primary) (Raw object)
-
https://link.springe...
-
https://urn.kb.se/re...
-
https://doi.org/10.1...
-
visa färre...
Abstract
Ämnesord
Stäng
- Knowledge of annual ring width and location of pith in relation to board cross-sections, and how these properties vary in the longitudinal direction of boards, is relevant for many purposes, such as assessment of shape mechanical properties and stability of sawn timber. Hence, the present research aims at developing a novel method and an algorithm, based on data obtained from optical surface scanning, by which the pith location along the length of sawn timber boards can be determined accurately and automatically. The first step of the method is to identify clear wood sections, free of defects along boards. Then time-frequency analysis, using the continuous wavelet transform, is applied to detect the surface annual ring width distribution of the four sides of the selected sections. Finally, the pith location is estimated by comparing annual ring width distributions on the different surfaces, and assuming that annual rings are concentric circles with the pith in the centre. The proposed algorithm was applied to a total sample of 104 Norway spruce boards. Results indicate that optical scanners and the suggested automatic method allow for accurate detection of annual ring width and location of pith along boards. For a sample of boards with the pith located within the cross-section, a mean error of 2.6 mm and 3.2 mm in the depth and thickness direction, respectively, was obtained. For a sample of boards of which 60% with pith located outside the cross-section, a mean discrepancy between automatically and manually determined pith locations of 3.9 mm and 5.8 mm in depth and thickness direction, respectively, was obtained.
Ämnesord
- TEKNIK OCH TEKNOLOGIER -- Samhällsbyggnadsteknik -- Husbyggnad (hsv//swe)
- ENGINEERING AND TECHNOLOGY -- Civil Engineering -- Building Technologies (hsv//eng)
- TEKNIK OCH TEKNOLOGIER -- Samhällsbyggnadsteknik -- Annan samhällsbyggnadsteknik (hsv//swe)
- ENGINEERING AND TECHNOLOGY -- Civil Engineering -- Other Civil Engineering (hsv//eng)
Nyckelord
- Optical scanning
- Automatic pith detection
- Annual ring width
- Continuous Wavelet Transform (CWT)
- Byggteknik
- Civil engineering
Publikations- och innehållstyp
- ref (ämneskategori)
- art (ämneskategori)
Hitta via bibliotek
Till lärosätets databas