Sökning: onr:"swepub:oai:DiVA.org:ltu-87954" >
Embedment propertie...
Embedment properties of thermally modified spruce timber with dowel-type fasteners
-
- van Blokland, Joran (författare)
- Swedish University of Agricultural Sciences,Sveriges lantbruksuniversitet,Skogens biomaterial och teknologi,Department of Forest Biomaterials and Technology
-
- Florisson, Sara (författare)
- Luleå tekniska universitet,Träteknik,Luleå University of Technology, Sweden
-
- Schweigler, Michael (författare)
- Linnéuniversitetet,Institutionen för byggteknik (BY),Department of Building Technology, Linnaeus University, Växjö, Sweden
-
visa fler...
-
- Ekevid, Torbjörn (författare)
- Volvo Construction Equipment, Gothenburg, Sweden,Volvo Construct Equipment, Sweden
-
- Bader, Thomas K., 1980- (författare)
- Linnéuniversitetet,Institutionen för byggteknik (BY),Department of Building Technology, Linnaeus University, Växjö, Sweden
-
- Adamopoulos, Stergios (författare)
- Swedish University of Agricultural Sciences,Sveriges lantbruksuniversitet,Skogens biomaterial och teknologi,Department of Forest Biomaterials and Technology
-
visa färre...
-
(creator_code:org_t)
-
- Elsevier, 2021
- 2021
- Engelska.
-
Ingår i: Construction and Building Materials. - : Elsevier. - 0950-0618 .- 1879-0526. ; 313
- Relaterad länk:
-
https://doi.org/10.1...
-
visa fler...
-
https://doi.org/10.1...
-
https://pub.epsilon.... (primary) (Raw object) (free)
-
https://urn.kb.se/re...
-
https://doi.org/10.1...
-
https://urn.kb.se/re...
-
https://res.slu.se/i...
-
visa färre...
Abstract
Ämnesord
Stäng
- This study investigates the effect of thermal modification, ThermoWood Thermo-D treatment versus no treatment, on the embedment properties of Norway spruce timber (Picea abies [L.] Karst.) with dowel-type fasteners. The test specimens were reinforced to prevent splitting of the wood. The influence of density, load direction, test specimen configuration (full hole versus half hole), moisture content, gauge points and calculation method were also evaluated. Thermal modification primarily affected the embedment strength parallel to the grain, which was ∼ 25% higher after thermal modification, mainly due to the change in physical properties because of the treatment, i.e. the lower equilibrium moisture content. The influence of the investigated parameters on embedment properties of thermally modified spruce followed similar trends as for unmodified spruce. It was for example seen that the density–embedment strength relationships still hold after the treatment despite the decrease in density and the increase in embedment strength parallel to the grain. However, after thermal modification, the influence of load direction on embedment strength was ∼30% larger and the influence of calculation method (yield versus ultimate strength) on embedment strength perpendicular to the grain was ∼10% smaller.
Ämnesord
- LANTBRUKSVETENSKAPER -- Lantbruksvetenskap, skogsbruk och fiske -- Trävetenskap (hsv//swe)
- AGRICULTURAL SCIENCES -- Agriculture, Forestry and Fisheries -- Wood Science (hsv//eng)
Nyckelord
- ASTM D 5764-97a
- Embedment stiffness
- Embedment strength
- EN 383
- Foundation modulus
- Full-hole test
- Half-hole test
- Norway spruce
- ThermoWood®
- Träteknik
- Wood Science and Engineering
- Forestry and Wood Technology
Publikations- och innehållstyp
- ref (ämneskategori)
- art (ämneskategori)
Hitta via bibliotek
Till lärosätets databas