onr:"swepub:oai:DiVA.org:mdh-36555"
Sökning: onr:"swepub:oai:DiVA.org:mdh-36555" > Preliminary design ...
- 1 av 1
- Föregående post
- Nästa post
- Till träfflistan
- Da Silva, EdnaMälardalens högskola,Framtidens energi (författare)
Preliminary design optimization of an organic Rankine cycle radial turbine rotor
- Artikel/kapitelEngelska2017
Förlag, utgivningsår, omfång ...
- American Society of Mechanical Engineers (ASME),2017
- printrdacarrier
Nummerbeteckningar
- LIBRIS-ID:oai:DiVA.org:mdh-36555
- https://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-36555URI
- https://doi.org/10.1115/GT2017-64028DOI
Kompletterande språkuppgifter
- Språk:engelska
- Sammanfattning på:engelska
Ingår i deldatabas
- SwePubSwePub
Klassifikation
Anmärkningar
- The present study describes the application of a preliminary design approach for the optimization of an organic Rankine cycle radial turbine. Losses in the nozzle the rotor have initially been modelled using a mean-line design approach. The work focuses on a typical small-scale application of 50 kW, and two working fluids, R245fa (1,1,1,3,3,-pentafluoropropane) and R236fa (1,1,1,3,3,3-hexafluoropropane) are considered for validation purposes. Real gas formulations have been used based on the NIST REFPROP database. The validation is based on a design from the literature, and the results demonstrate close agreement the reference geometry and thermodynamic parameters. The total-to-total efficiencies of the reference turbine designs were 72% and 79%. Following the validation exercise, an optimization process was performed using a controlled random search algorithm with the turbine efficiency set as the figure of merit. The optimization focuses on the R245fa working fluid since it is more suitable for the operating conditions of the proposed cycle, enables an overpressure in the condenser and allows higher system efficiency levels. The R236fa working fluid was also used for comparison with the literature, and the reason is the positive slope of the saturation curve, somehow is possible to work with lower temperatures. Key preliminary design variables such as flow coefficient, loading coefficient, and length parameter have been considered. While several optimized preliminary designs are available in the literature with efficiency levels of up to 90%, the preliminary design choices made will only hold true for machines operating with ideal gases, i.e. typical exhaust gases from an airbreathing combustion engine. For machines operating with real gases, such as organic working fluids, the design choices need to be rethought and a preliminary design optimization process needs to be introduced. The efficiency achieved in the final radial turbine design operating with R245fa following the optimization process was 82.4%. A three-dimensional analysis of the flow through the blade section using computational fluid dynamics was carried out on the final optimized design to confirm the preliminary design and further analyze its characteristics.
Ämnesord och genrebeteckningar
- TEKNIK OCH TEKNOLOGIER Maskinteknik Energiteknik hsv//swe
- ENGINEERING AND TECHNOLOGY Mechanical Engineering Energy Engineering hsv//eng
- Organic ranking cycle
- Preliminary design optimization
- R245fa
- Radial turbine
- Alternative fuels
- Coal combustion
- Computational fluid dynamics
- Design
- Efficiency
- Exhaust gases
- Fluids
- Gas turbines
- Gases
- Optimization
- Rankine cycle
- Turbines
- Turbomachinery
- Controlled random search
- Organic ranking cycles
- Preliminary design
- Radial turbines
- Small-scale applications
- Thermodynamic parameter
- Three-dimensional analysis
- Nozzle design
Biuppslag (personer, institutioner, konferenser, titlar ...)
- Kyprianidis, KonstantinosMälardalens högskola,Framtidens energi(Swepub:mdh)kks01 (författare)
- Säterskog, M.Saab AB, Linköping, Sweden (författare)
- Camacho, R. G. R.Federal University of Itajubá, Itajubá, MG, Brazil (författare)
- Sarmiento, A. L. E.FederalCenter of Technology Education, Rio de Janeiro, RJ, Brazil (författare)
- Mälardalens högskolaFramtidens energi (creator_code:org_t)
Sammanhörande titlar
- Ingår i:PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION, 2017, VOL 3: American Society of Mechanical Engineers (ASME)9780791850831
Internetlänk
Hitta via bibliotek
- PROCEEDINGS OF THE ASME TURBO EXPO: TURBINE TECHNICAL CONFERENCE AND EXPOSITION,... (Sök värdpublikationen i LIBRIS)
Till lärosätets databas
- 1 av 1
- Föregående post
- Nästa post
- Till träfflistan
Hitta mer i SwePub
- Av författaren/redakt...
- Da Silva, Edna
- Kyprianidis, Kon ...
- Säterskog, M.
- Camacho, R. G. R ...
- Sarmiento, A. L. ...
- Om ämnet
-
- TEKNIK OCH TEKNOLOGIER
- TEKNIK OCH TEKNO ...
- och Maskinteknik
- och Energiteknik
- Artiklar i publikationen
- PROCEEDINGS OF T ...
- Av lärosätet
- Mälardalens universitet
Sök utanför SwePub
- Sök vidare i:
- Google Book Search
- Google Scholar
Kungliga biblioteket hanterar dina personuppgifter i enlighet med EU:s dataskyddsförordning (2018), GDPR. Läs mer om hur det funkar här.
Så här hanterar KB dina uppgifter vid användning av denna tjänst.
- Copyright © LIBRIS - Nationella bibliotekssystem
- LIBRIS.kb.se
