Sökning: onr:"swepub:oai:lup.lub.lu.se:85e9ef1e-0562-465c-a664-ae1982d1cdb0" >
Effect of feed on s...
Effect of feed on sub-surface deformation and yield strength of oxygen-free pitch copper in machining
-
- Olsson, Mike (författare)
- Lund University,Lunds universitet,Industriell Produktion,Institutionen för maskinvetenskaper,Institutioner vid LTH,Lunds Tekniska Högskola,Production and Materials Engineering,Department of Mechanical Engineering Sciences,Departments at LTH,Faculty of Engineering, LTH
-
- Bushlya, Volodymyr (författare)
- Lund University,Lunds universitet,Industriell Produktion,Institutionen för maskinvetenskaper,Institutioner vid LTH,Lunds Tekniska Högskola,Production and Materials Engineering,Department of Mechanical Engineering Sciences,Departments at LTH,Faculty of Engineering, LTH
-
- Zhou, Jinming (författare)
- Lund University,Lunds universitet,Industriell Produktion,Institutionen för maskinvetenskaper,Institutioner vid LTH,Lunds Tekniska Högskola,Production and Materials Engineering,Department of Mechanical Engineering Sciences,Departments at LTH,Faculty of Engineering, LTH
-
visa fler...
-
- Ståhl, Jan-Eric (författare)
- Lund University,Lunds universitet,Industriell Produktion,Institutionen för maskinvetenskaper,Institutioner vid LTH,Lunds Tekniska Högskola,Production and Materials Engineering,Department of Mechanical Engineering Sciences,Departments at LTH,Faculty of Engineering, LTH
-
visa färre...
-
(creator_code:org_t)
- Elsevier BV, 2016
- 2016
- Engelska 4 s.
-
Ingår i: Procedia CIRP. - : Elsevier BV. - 2212-8271. ; 45, s. 103-106
- Relaterad länk:
-
http://dx.doi.org/10... (free)
-
visa fler...
-
https://doi.org/10.1...
-
https://lup.lub.lu.s...
-
https://doi.org/10.1...
-
visa färre...
Abstract
Ämnesord
Stäng
- The article deals with the influence of the machining induced surface integrity on tensile properties of 99.99% purity Oxygen-Free Pitch copper (OFC), used in nuclear and research facilities. The increase in the feed in machining was found to lead to an increase, up to 55%, in yield strength of the OFC specimens. Intensive sub-surface deformation and a high degree of work-hardening in the near-surface layer are attributed to this effect. Increase of feed resulted in an increase of deformation depth ɛIII and work-hardening ΔH detected via SEM and nanoindentation. The correlation coefficient between the tensile properties and sub-surface deformation was found to equal R = 0.983.
- The article deals with the influence of the machining induced surface integrity on tensile properties of 99.99% purity Oxygen-Free Pitch copper (OFC), used in nuclear and research facilities. The increase in the feed in machining was found to lead to an increase, up to 55%, in yield strength of the OFC specimens. Intensive sub-surface deformation and a high degree of work-hardening in the near-surface layer are attributed to this effect. Increase of feed resulted in an increase of deformation depth ɛIII and work-hardening ΔH detected via SEM and nanoindentation. The correlation coefficient between the tensile properties and sub-surface deformation was found to equal R = 0.983.
Ämnesord
- TEKNIK OCH TEKNOLOGIER -- Maskinteknik -- Produktionsteknik, arbetsvetenskap och ergonomi (hsv//swe)
- ENGINEERING AND TECHNOLOGY -- Mechanical Engineering -- Production Engineering, Human Work Science and Ergonomics (hsv//eng)
Publikations- och innehållstyp
- kon (ämneskategori)
- ref (ämneskategori)
Hitta via bibliotek
Till lärosätets databas