Sökning: onr:"swepub:oai:lup.lub.lu.se:f42df8d5-4abf-4457-a020-434eab78b2b8" >
Impact of Multiple ...
Impact of Multiple Injection Strategies on Performance and Emissions of Methanol PPC under Low Load Operation
-
- Aziz, Amir (författare)
- Lund University,Lunds universitet,Förbränningsmotorer,Institutionen för energivetenskaper,Institutioner vid LTH,Lunds Tekniska Högskola,Combustion Engines,Department of Energy Sciences,Departments at LTH,Faculty of Engineering, LTH
-
- Garcia, Antonio (författare)
- Polytechnic University of Valencia
-
- Pinto Dos Santos, Clarisse (författare)
- École nationale supérieure de mécanique et d'aérotechnique (ISAE-ENSMA)
-
visa fler...
-
- Tuner, Martin (författare)
- Lund University,Lunds universitet,Förbränningsmotorer,Institutionen för energivetenskaper,Institutioner vid LTH,Lunds Tekniska Högskola,Combustion Engines,Department of Energy Sciences,Departments at LTH,Faculty of Engineering, LTH
-
visa färre...
-
(creator_code:org_t)
- 2020-04-14
- 2020
- Engelska.
-
Ingår i: WCX SAE World Congress Experience. - 400 Commonwealth Drive, Warrendale, PA, United States : SAE International. - 0148-7191. ; 2020-April
- Relaterad länk:
-
http://dx.doi.org/10...
-
visa fler...
-
https://lup.lub.lu.s...
-
https://doi.org/10.4...
-
visa färre...
Abstract
Ämnesord
Stäng
- There is growing global interest in using renewable alcohols to reduce the greenhouse gases and the reliance on conventional fossil fuels. Recent studies show that methanol combined with partially premixed combustion provide clear performance and emission benefits compared to conventional diesel diffusion combustion. Nonetheless, high unburned hydrocarbon (HC) and carbon monoxide (CO) emissions can be stated as the main PPC drawback in light load condition when using high octane fuel such as Methanol with single injection strategy. Thus, the present experimental study has been carried out to investigate the influence of multiple injection strategies on the performance and emissions with methanol fuel in partially premixed combustion. Specifically, the main objective is to reduce HC, CO and simultaneously increase the gross indicated efficiency compared to single injection strategy. The work was performed with a single cylinder heavy duty engine, operated at 4 bar gross indicated mean effective pressure, and an engine speed of 1200 rpm. Double and triple injections were implemented with varying dwells, injection timings and fuel mass proportions. The experimental results were analyzed with a merit function to select the optimal injection strategy. Concerning emissions, the constraints for the merit function were based on the EURO VI limits, while the highest gross indicated efficiency for single injection was used to define the performance constraint. The results revealed that with proper dwell and mass proportion, multiple injection strategies can improve the gross indicated efficiency and reduce the emissions compare to single injection strategy.
Ämnesord
- TEKNIK OCH TEKNOLOGIER -- Maskinteknik -- Farkostteknik (hsv//swe)
- ENGINEERING AND TECHNOLOGY -- Mechanical Engineering -- Vehicle Engineering (hsv//eng)
- TEKNIK OCH TEKNOLOGIER -- Maskinteknik -- Energiteknik (hsv//swe)
- ENGINEERING AND TECHNOLOGY -- Mechanical Engineering -- Energy Engineering (hsv//eng)
Publikations- och innehållstyp
- kon (ämneskategori)
- ref (ämneskategori)
Hitta via bibliotek
Till lärosätets databas