| 1. |
- Hellsten, Torbjörn, et al.
(författare)
-
Self-Consistent ICRH Modelling
- 2011
-
Ingår i: RADIO FREQUENCY POWER IN PLASMAS. - : AIP. - 9780735409781 ; , s. 365-368
-
Konferensbidrag (refereegranskat)abstract
- A new code for self-consistent modelling of ion cyclotron heating suitable for routine calculations has been developed.
|
|
| 2. |
- Jacquet, P., et al.
(författare)
-
Parasitic signals in the receiving band of the Sub-Harmonic Arc Detection system on JET ICRF Antennas
- 2011
-
Ingår i: AIP Conf. Proc.. - : AIP. - 9780735409781 ; , s. 17-20
-
Konferensbidrag (refereegranskat)abstract
- When testing the SHAD system on JET ICRF antennas, parasitic signals in the detection band (5-20MHz) were detected. We have identified emission from grid breakdown events in the Neutral Beam injectors, and Ion Cyclotron Emission from the plasma. Spurious signals in the band 4-10 MHz are also often observed at the onset of ELM events. Such parasitic signals could complicate the design and operation of SHAD in ICRF systems for fusion devices.
|
|
| 3. |
- Johnson, Thomas, et al.
(författare)
-
Library for RF Interactions in Orbit Following Codes
- 2011
-
Ingår i: RADIO FREQUENCY POWER IN PLASMAS. - : AIP. - 9780735409781
-
Konferensbidrag (refereegranskat)abstract
- A new code-library has been developed to handle quasi-linear wave particle interactions in orbit following Monte Carlo codes, RFOF (RF interactions in Orbit Following codes). This library will enable a large number of orbit following codes to model fast ion acceleration during ICRF and Lower Hybrid heating. The RFOF consists of two main modules: one evaluates the resonance condition, the other the resulting RF acceleration. The resonance condition is tested at each step along the orbit and the location of the next upcoming resonance is predicted. When a particle reaches the resonance, a quasi-linear acceleration is calculated with a novel Monte Carlo technique that avoids the time-consuming evaluation of phase-space derivatives of the interaction strength. In RFOF the wave-particles interactions are assumed to be localized to a single point on the orbit. This is often valid for the ion cyclotron and lower hybrid frequency ranges, but prevents the treatment of bounce and precessional resonances. The RFOF has been developed within the European Task Force for Integrated Tokamak Modelling, enabling interaction between experts in different fields. As a result the code is designed with a simple and generic interface, with a minimum of assumptions on e.g. the geometry. Successful integration with the two orbit following codes, ASCOT and SPOT, has already been demonstrated.
|
|
| 4. |
- Lerche, E., et al.
(författare)
-
ICRF scenarios for ITER's half-field phase
- 2011
-
Ingår i: AIP Conf. Proc.. - : AIP. - 9780735409781 ; , s. 245-252
-
Konferensbidrag (refereegranskat)abstract
- The non-active operation phase of ITER will be done in H and 4He plasmas at half the nominal magnetic field, B 0=2.65T. At this field and for the given frequency range of the ICRF system (f=40-55MHz), three ICRF heating scenarios are available a priori: (i) Fundamental ICRH of majority H plasmas at f≈40MHz, (ii) second harmonic (N=2) 3He ICRH in H plasmas at f≈53MHz and (iii) fundamental minority H heating in 4He plasmas at f≈40MHz. While the latter is expected to perform well for not too large H concentrations, the heating scenarios available for the Hydrogen plasmas are less robust. Recent JET experiments performed in similar conditions to those expected in ITER's half-field phase confirmed the low performance of these two scenarios and numerical simulations have shown that the situation is not much improved in ITER, mainly because of the rather modest plasma temperature and density expected in its initial operation phase. A summary of the main experimental results obtained at JET followed by numerical predictions for ITER's half-field ICRF heating scenarios will be presented.
|
|
| 5. |
- Van Eester, D., et al.
(författare)
-
Enhancing the mode conversion efficiency in JET plasmas with multiple mode conversion layers
- 2011
-
Ingår i: AIP Conf. Proc.. - : AIP. - 1551-7616 .- 0094-243X. - 9780735409781 ; , s. 301-308
-
Konferensbidrag (refereegranskat)abstract
- The constructive interference effect described by Fuchs et al. [1] shows that the mode conversion and thereby the overall heating efficiency can be enhanced significantly when an integer number of fast wave wavelengths can be folded in between the high field side fast wave cutoff and the ion-ion hybrid layer(s) at which the ion Bernstein or ion cyclotron waves are excited. This effect was already experimentally identified in ( 3He)-D plasmas [2] and was recently tested in ( 3He)-H JET plasmas. The latter is an 'inverted' scenario, which differs significantly from the ( 3He)-D scenarios since the mode-conversion layer is positioned between the low field side edge of the plasma and the ion-cyclotron layer of the minority 3He ions (whereas the order in which a wave entering the plasma from the low field side encounters these layers is inverted in a 'regular' scenario), and because much lower 3He concentrations are needed to achieve the mode-conversion heating regime. The presence of small amounts of 4He and D in the discharges gave rise to an additional mode conversion layer on top of the expected one associated with 3He-H, which made the interpretation of the results more complex but also more interesting: Three different regimes could be distinguished as a function of X[ 3He], and the differing dynamics at the various concentrations could be traced back to the presence of these two mode conversion layers and their associated fast wave cutoffs. Whereas (1-D and 2-D) numerical modeling yields quantitative information on the RF absorptivity, recent analytical work by Kazakov [3] permits to grasp the dominant underlying wave interaction physics.
|
|
