1. |
- Moberg, Christina, et al.
(författare)
-
De unga gör helt rätt när de stämmer staten
- 2022
-
Ingår i: Aftonbladet. - 1103-9000.
-
Tidskriftsartikel (populärvet., debatt m.m.)abstract
- 1 620 forskare och lärare i forskarvärlden: Vi ställer oss bakom Auroras klimatkrav
|
|
2. |
- Blomberg, Anders, et al.
(författare)
-
Chronic Airflow Limitation, Emphysema and Impaired Diffusing Capacity in Relation to Smoking Habits in a Swedish Middle-Aged Population.
- 2024
-
Ingår i: Annals of the American Thoracic Society. - 2329-6933 .- 2325-6621.
-
Tidskriftsartikel (refereegranskat)abstract
- RATIONALE: Chronic obstructive pulmonary disease (COPD) includes respiratory symptoms and chronic airflow limitation (CAL). In some cases, emphysema and impaired diffusing capacity for carbon monoxide (DLCO) are present, but characteristics and symptoms vary with smoking exposure.OBJECTIVES: To study the prevalence of CAL, emphysema and impaired DLCO in relation to smoking and respiratory symptoms in a middle-aged population.METHODS: We investigated 28,746 randomly invited individuals (52% women) aged 50-64 years across six Swedish sites. We performed spirometry, DLCO, high-resolution computed tomography (HRCT) and asked for smoking habits and respiratory symptoms. CAL was defined as post-bronchodilator forced expiratory volume in 1 second divided by forced expiratory volume (FEV1/FVC)<0.7.RESULTS: The overall prevalence was for CAL 8.8%, for impaired DLCO (DLCOCONCLUSIONS: In this large population-based study of middle-aged people, CAL and impaired DLCO were associated with common respiratory symptoms. Self-reported asthma was not associated with CAL in never-smokers. Our findings suggest that CAL in never-smokers signifies a separate clinical phenotype that may be monitored and, possibly, treated differently from smoking-related COPD. This article is open access and distributed under the terms of the Creative Commons Attribution 4.0 International License (https://creativecommons.org/licenses/by/4.0/).
|
|
3. |
- Ekstrom, Mattias, et al.
(författare)
-
Stimulated in vivo synthesis of plasminogen activator inhibitor 1 in human adipose tissue
- 2012
-
Ingår i: Thrombosis and Haemostasis. - 0340-6245 .- 2567-689X. ; 108:3, s. 485-492
-
Tidskriftsartikel (refereegranskat)abstract
- Plasminogen activator inhibitor type-1 (PAI-1) is one of the most important inhibitors of endogenous fibrinolysis. Adipose tissue is a suggested source of the elevated plasma levels o(-) PAI-1 in obesity. The relation between PAI-1 and inflammation is of particular interest, but current knowledge regarding regulation of PAI-1 in adipose tissue is mainly based on animal studies or ex vivo experiments on human cultured adipocytes. So far, no study has described stimulated gene expression and protein synthesis of PAI-1 in vivo in human adipose tissue. We used open heart surgery as a model of acute systemic inflammation. Twenty-two male patients underwent blood sampling and omental and subcutaneous adipose tissue biopsies for gene expression studies before and after surgery. Expression and localisation of PAI-1 antigen was evaluated by immunohistochemistry. After surgery gene expression of PAI-1 increased 27-fold in omental adipose tissue and three-fold in subcutaneous adipose tissue, but no differences were found in tissue-type plasminogen activator (t-PA) mRNA. PAI-1 antigen was localised within endothelial cells and in the adipose tissue interstitium close to vessels. The upregulated gene expression and protein synthesis in adipose tissue was followed by increased concentrations of PAI-1 antigen in plasma. In conclusion, we present for the first time that an acute systemic inflammation in humans increased gene expression and protein synthesis of PAI-1 in adipose tissue and that this increase was most prominent in omental adipose tissue. PAI-1 synthesis in adipose tissue due to acute systemic inflammation may be a link between inflammation and impaired endogenous fibrinolysis.
|
|
4. |
- Ekström, Erik, 1989-, et al.
(författare)
-
Epitaxial Growth of CaMnO3-y Films on LaAlO3 (112 over bar 0) by Pulsed Direct Current Reactive Magnetron Sputtering
- 2022
-
Ingår i: Physica Status Solidi. Rapid Research Letters. - : Wiley-V C H Verlag GMBH. - 1862-6254 .- 1862-6270. ; 16:4
-
Tidskriftsartikel (refereegranskat)abstract
- CaMnO3 is a perovskite with attractive magnetic and thermoelectric properties. CaMnO3 films are usually grown by pulsed laser deposition or radio frequency magnetron sputtering from ceramic targets. Herein, epitaxial growth of CaMnO3-y (002) films on a (112 over bar 0)-oriented LaAlO3 substrate using pulsed direct current reactive magnetron sputtering is demonstrated, which is more suitable for industrial scale depositions. The CaMnO3-y shows growth with a small in-plane tilt of <approximate to 0.2 degrees toward the (200) plane of CaMnO3-y and the (1 over bar 104) with respect to the LaAlO3 (112 over bar 0) substrate. X-ray photoelectron spectroscopy of the electronic core levels shows an oxygen deficiency described by CaMnO2.58 that yields a lower Seebeck coefficient and a higher electrical resistivity when compared to stoichiometric CaMnO3. The LaAlO3 (112 over bar 0) substrate promotes tensile-strained growth of single crystals. Scanning transmission electron microscopy and electron energy loss spectroscopy reveal antiphase boundaries composed of Ca on Mn sites along and , forming stacking faults.
|
|
5. |
- Ekström, Erik, et al.
(författare)
-
Microstructure control and property switching in stress-free van der Waals epitaxial VO2 films on mica
- 2023
-
Ingår i: Materials & design. - : ELSEVIER SCI LTD. - 0264-1275 .- 1873-4197. ; 229
-
Tidskriftsartikel (refereegranskat)abstract
- Realizing stress-free inorganic epitaxial films on weakly bonding substrates is of importance for applications that require film transfer onto surfaces that do not seed epitaxy. Film-substrate bonding is usually weakened by harnessing natural van der Waals layers (e.g., graphene) on substrate surfaces, but this is difficult to achieve in non-layered materials. Here, we demonstrate van der Waals epitaxy of stress-free films of a non-layered material VO2 on mica. The films exhibit out-of-plane 010 texture with three inplane orientations inherited from the crystallographic domains of the substrate. The lattice parameters are invariant with film thickness, indicating weak film-substrate bonding and complete interfacial stress relaxation. The out-of-plane domain size scales monotonically with film thickness, but the in-plane domain size exhibits a minimum, indicating that the nucleation of large in-plane domains supports subsequent island growth. Complementary ab initio investigations suggest that VO2 nucleation and van der Waals epitaxy involves subtle polarization effects around, and the active participation of, surface potassium atoms on the mica surface. The VO2 films show a narrow domain-size-sensitive electrical-conductiv ity-temperature hysteresis. These results offer promise for tuning the properties of stress-free van der Waals epitaxial films of non-layered materials such as VO2 through microstructure control (C) 2023 The Author(s). Published by Elsevier Ltd. This is an open access article under the CC BY license (http://creativecommons.org/licenses/by/4.0/).
|
|
6. |
- Ekström, Erik, et al.
(författare)
-
The effects of microstructure, Nb content and secondary Ruddlesden-Popper phase on thermoelectric properties in perovskite CaMn1-xNbxO3 (x=0-0.10) thin films
- 2020
-
Ingår i: RSC Advances. - : Royal Society of Chemistry. - 2046-2069. ; 10:13, s. 7918-7926
-
Tidskriftsartikel (refereegranskat)abstract
- CaMn1-xNbxO3 (x = 0, 0.5, 0.6, 0.7 and 0.10) thin films have been grown by a two-step sputtering/annealing method. First, rock-salt-structured (Ca,Mn1-x,Nb-x)O thin films were deposited on 11 & x304;00 sapphire using reactive RF magnetron co-sputtering from elemental targets of Ca, Mn and Nb. The CaMn1-xNbxO3 films were then obtained by thermally induced phase transformation from rock-salt-structured (Ca,Mn1-xNbx)O to orthorhombic during post-deposition annealing at 700 degrees C for 3 h in oxygen flow. The X-ray diffraction patterns of pure CaMnO3 showed mixed orientation, while Nb-containing films were epitaxially grown in [101] out of-plane-direction. Scanning transmission electron microscopy showed a Ruddlesden-Popper (R-P) secondary phase in the films, which results in reduction of the electrical and thermal conductivity of CaMn1-xNbxO3. The electrical resistivity and Seebeck coefficient of the pure CaMnO3 film were measured to 2.7 omega cm and -270 mu V K-1 at room temperature, respectively. The electrical resistivity and Seebeck coefficient were reduced by alloying with Nb and was measured to 0.09 omega cm and -145 mu V K-1 for x = 0.05. Yielding a power factor of 21.5 mu W K-2 m(-1) near room temperature, nearly eight times higher than for pure CaMnO3 (2.8 mu W K-2 m(-1)). The power factors for alloyed samples are low compared to other studies on phase-pure material. This is due to high electrical resistivity originating from the secondary R-P phase. The thermal conductivity of the CaMn1-xNbxO3 films is low for all samples and is the lowest for x = 0.07 and 0.10, determined to 1.6 W m(-1) K-1. The low thermal conductivity is attributed to grain boundary scattering and the secondary R-P phase.
|
|
7. |
- Ekström, Thommy, et al.
(författare)
-
Dense single-phase β-sialon ceramics by glass-encapsulated hot isostatic pressing
- 1989
-
Ingår i: Journal of Materials Science. - 0022-2461. ; 24:5, s. 1853-1861
-
Tidskriftsartikel (refereegranskat)abstract
- Single phase-sialon ceramics, Si6–z Al z O z N8–z , have been prepared from carefully balanced powder mixtures, also taking account of any excess oxygen in the starting materials. Sintering powder compacts in a nitrogen atmosphere (0.1 MPa) at 1800° C or higher transforms the starting mixture into a-sialon solid solution atz-values up to about 4.3, but the sintered material has an open porosity. Addition of 1 wt% Y2O3 to the starting mix improved the sintering behaviour somewhat and the density of the sintered compacts reached 95% of the theoretical value. By glass-encapsulated hot isostatic pressing at 1825° C, however, sintered materials of virtually theoretical density could be obtained, with or without the 1 wt% Y2O3 addition. These latter samples have been studied by X-ray diffraction and electron microscopy, and their hardness and indentation fracture toughness have been measured. It was found that the maximum extension of the-sialon phase composition at 1825° C and 200 MPa pressure is slightly below 4,z 3.85 and about 4.1 at atmospheric pressure, and that the hexagonal unit cell parameters are linear functions of thez-value. The single-phase-sialon ceramics had no residual glassy grain-boundary phase. The grain shape was equi-axed and the grain size increased from about 1m at lowz-values to 5m at highz-values. At lowz-values the hardness at a 98 N load was 1700 and the fracture toughness 3, whereas an increase inz above 1 caused both the hardness and fracture toughness to decrease significantly. Addition of 1 wt % Y2O3 to the starting mix prior to the HIP-sintering gave rise to a small amount of amorphous intergranular phase, changes in grain size and shape, a clear increase in fracture toughness and a moderate decrease in hardness.
|
|
8. |
- Ekström, Thomas, et al.
(författare)
-
Differentiation strategies for defence supply chain design
- 2020
-
Ingår i: Journal of Defense Analytics and Logistics. - : Emerald Group Publishing Limited. - 2399-6439. ; 4:2, s. 183-202
-
Tidskriftsartikel (refereegranskat)abstract
- PurposeDefence supply chains (SCs) aim at operational outcomes, and armed forces depend on them to provide availability and preparedness in peace and sustainability in war. Previous research has focussed on strategies for SCs aiming at financial outcomes. This raises the question of how suitable commercial supply chain strategies (SCSs) are for supply chain design (SCD) in defence. The purpose of this paper is to explain the constructs of SCSs that satisfy military operational requirements and to propose SCSs that are appropriate in defence.Design/methodology/approachThis paper reports on a Delphi study with 20 experts from Swedish defence authorities. Through three Delphi rounds, two workshops and a validation round, these experts contributed to the reported findings.FindingsThe findings demonstrate that commercial SC constructs are acceptable and applicable in defence but not sufficient. An additional strategy is required to satisfy requirements on availability, preparedness and sustainability. The paper shows that different requirements in peace and war make it challenging to design suitable defence SCs and proposes eight SCSs that satisfy these requirements.Research limitations/implicationsThe results emanate from the Swedish defence context and further research is required for generalisation.Originality/valueThis paper extends theory by investigating SCs aiming at operational outcomes. For managers in companies and defence authorities, it explicates how the unique issues in defence must influence SCD to satisfy operational requirements.
|
|
9. |
|
|
10. |
|
|