| 1. |
- Engstrand, Per, 1955-, et al.
(författare)
-
Improved refining energy efficiency in thermo-mechanical pulping by means of collimated wood chipping – from solid mechanics to full scale evaluation
- 2016
-
Ingår i: PaperWeek Canada 2016 Conference <em>February 1 to 5, 2016, Montreal</em>.
-
Konferensbidrag (refereegranskat)abstract
- The wood chipping process was never optimized with regard to high yield pulping processes as thermomechanical pulping (TMP) and chemithermomechanical pulping (CTMP). It is generally believed that wood chips for pulping should be produced in such a way that the degree of damage is minimized and that the chip dimensional distribution should be as narrow as possible. Since the TMP and CTMP processes were developed in the 60-ies and 70-ies, compression screw as well as roll nip equipment have been developed to pretreat wood chips as a way to reduce refining energy consumption to given fiber and pulp properties and also in order to improve impregnation. The general conclusions are that a combination of shear and compression in the tangential or radial direction of the wood initiates cracks that later in the refiner will enhance and optimize fiber separation and also fiber property development. The idea with the collimated chipping technology is to utilize the wood chipper as a tool, combining cutting of wood logs to wood chips with a pretreatment of the chips by creating cracks that would enhance fiber separation, fiber surface development as well as chip-impregnation. In this case the compression is performed in the wood fiber direction, in which direction wood actually is weakest when it comes to compression induced cracking. The maximization of the amount of cracks in wood-chips is performed by optimizing the knife angle (or spout angle) in the chipper, to what we call collimated chipping (according to a patent owned by CCT AB). This presentation describes a theoretical background and two demonstration scale studies performed by SCA Forest Products at their Ortviken mill. One conclusion drawn, based on two-month test period with three weeks of collimated chipping, was that specific refining energy reduction was around 100 kWh/adt of the 1400 kWh/adt used in primary stage double disc refining. Most probably the potential is higher if the whole system is optimized. Tests were performed at constant production rate and energy was reduced by reducing power to constant freeness, leading to similar tensile and light scattering levels. The deliberately increased forces created in the wood chipper by means of an optimized (increased) edge angle caused more problems with knife holder equipment than normally, as well as increased vibrations. These problems will have to be solved for future long-term implementation of the technique.
|
|
| 2. |
- Enberg, Sofia, et al.
(författare)
-
Some causes of formation of colour during storage of hydrogen-peroxide bleached Norway spruce mechanical pulp
- 2014
-
Ingår i: Nordic Pulp & Paper Research Journal. - 0283-2631 .- 2000-0669. ; 29:2, s. 356-366
-
Tidskriftsartikel (refereegranskat)abstract
- The discolouration of hydrogen-peroxide bleached Norway spruce mechanical pulp during storage in mill systems was studied and the contributions of process water, iron and dyes were evaluated over the visible spectrum. Washing of the pulp made it less sensitive to storage, possibly due to the removal of extractives, lignin-like substances, iron and pulp fines. Storage in white water gave extensive discolouration with a shoulder in the absorption spectrum at around 550-650 nm. Most of the colour was associated with pulp fines or filler but some colour was also found in smaller fractions and in the water phase. The addition of ferric ions increased the light absorption coefficient during storage, initially at short wavelengths and then over the whole spectrum, but could not explain the increased absorption at 550-650 nm and could not be the only cause of the darkening in the mill system. A cationic basic violet dye gave a shoulder in the absorption spectrum similar to that in the mill system, but the absorption in this area did not increase during storage. Model calculations indicate that ferric ions together with violet and red dyes could explain a major part, but not all, of the colour observed in the mill system after storage. The darkening not accounted for at longer wavelengths and around 550-650 nm is suggested to be related to fines and fillers including dissolved and colloidal substances associated with these particles.
|
|
| 3. |
- Enberg, Sofia
(författare)
-
Storage of Hydrogen Peroxide Bleached Mechanical Pulp : Reduction in Reflectance over the Visible Spectrum
- 2014
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- The objective of this thesis is to determine possible causes of the darkening of hydrogen peroxide bleached mechanical pulp over the visible spectrum and their relative contributions. It focuses on both process conditions and the composition of the pulp and the dilution water, including additions or losses of material along the process line from the bleach tower to the paper machine.A mapping of the optical properties of the pulp along the process showed that the fine fraction of the pulp darkened more than the long fibre fraction. Simulation of retention times of different fractions showed that the main part of the fine material is retained in the paper within a few hours, a small part might circulate for considerably longer time and may therefore be strongly coloured.Storage trials were mainly performed using a hydrogen peroxide bleached mechanical pulp intended for SC paper made of Norway spruce (Picea abies), sampled on one occasion and stored in a freezer. Unwashed or well-washed pulp was stored in distilled water or in different process waters. Some complementary trials were included, e.g. unbleached pulp.Time and temperature were the process variables that gave the strongest darkening of the pulp, as expected, both in a clean and a more process-like system, whereas pH only had an effect in the presence of process waters; the highest brightness stability was seen at a pH around 5.5–6.0.The darkening was due to an increase in the light absorption coefficient (k) beginning at short wavelengths, but after longer storage times the increase in kλ also became noticeable at longer wavelengths. The colour (CIE L*, a*, b*) of the pulp changed towards red and yellow, initially more towards red and then more towards yellow. These changes were clearly visible.Washing of the bleached pulp made it less sensitive to storage; possibly due to the removal of extractives, lignin-like substances, metals and pulp fines. This washing had little effect before storage and the amount of material removed was small.The pulp darkened more when stored in process waters compared to distilled water. Apart from fibres, most of the colour was associated with pulp fines or filler but some colour was also found in the dissolved and colloidal fractions. At an increased pulp consistency, the increase in k460 was smaller.Storage in white water from the paper machine gave extensive discolouration with a shoulder in the absorption spectrum around 550–650 nm, which increased with time. The addition of ferric ions increased the light absorption coefficient during storage, but could not explain the increased absorption at 550–650 nm nor could it be the only cause of the darkening in the mill system. A cationic basic violet dye gave a shoulder in the absorption spectrum similar to that of the mill system, but the absorption of the dye did not increase during storage. Model calculations indicate, but do not prove, that ferric ions together with violet and red dyes could have played a major, but not exclusive role in the colour observed in the mill system after storage. The darkening not accounted for, at longer wavelengths and around 550–650 nm, is suggested to be related to fines and fillers including dissolved and colloidal substances associated with these particles.A method to produce representative sheets for determination of optical properties of mechanical pulps was developed. The new method makes it possible to follow changes in light absorption and light scattering coefficients over the visible range of wavelengths. It is approximately six times faster than standard methods, reduces the risk of additional darkening of the sample and can be used with small pulp quantities.The deviation from the expected linear behaviour of the light scattering coefficient, s, at wavelengths corresponding to strong light absorption has been studied using the Kubelka-Munk model and the angular resolved DORT2002 radiative transfer solution method. The decrease in s could not be explained by errors introduced in the Kubelka-Munk modelling by anisotropic scattering.
|
|
| 4. |
- Enberg, Sofia, et al.
(författare)
-
The influence of process waters on optical properties during storage of hydrogen-peroxide bleached Norway spruce mechanical pulp
- 2014
-
Ingår i: Nordic Pulp & Paper Research Journal. - 0283-2631 .- 2000-0669. ; 29:2, s. 344-355
-
Tidskriftsartikel (refereegranskat)abstract
- To evaluate the causes behind the formation of colour in mill systems, the effect of different process waters on the optical properties of hydrogen-peroxide bleached Norway spruce mechanical pulp during storage was studied. The influence of process water type, temperature, time, pulp consistency and pH was evaluated over the visible range of wavelengths. The darkening was more pronounced when pulp was stored in process waters compared to in distilled water. Increased temperature and prolonged storage times increased the darkening as expected, whereas a higher storage consistency gave less darkening than a lower storage consistency (15% compared to 5%). The pH value that gave the lowest brightness reduction and a minimum in Delta k(460) was found to be 5.5-6.0. Storage of pulp in white water from the paper machine resulted in a broad shoulder in the k spectra indicating colour formation related to the particles in this water. Part of this shoulder in absorption spectra was related to added dyes, but the increase in absorption with time is likely to be caused by some other colour formation. The colour measured as a*, b* showed that the storage changed the colour of the pulp towards red and yellow, and initially more towards red.
|
|
| 5. |
- Engstrand, Mats
(författare)
-
Cellular Immune Responses to Allografts and Cytomegalovirus
- 2003
-
Doktorsavhandling (övrigt vetenskapligt/konstnärligt)abstract
- Today the immunosuppressive treatment is kept to a level were the incidence of acute rejection is below 20% within the first year after transplantation. As a consequence, a group of transplanted patients is over-immunosuppressed and at risk for infections. There is therefore an urgent need for tools which are able to determine the cellular immune response after organ transplantation. This knowledge would facilitate the task of prospectively opimize the immunosuppressive treatment and identify patients at risk of developing rejection episodes or infections.To address this issue, a rat-kidney transplantation model for acute rejection was developed to study immune responses to allografts. Infiltrating lymphocytes were analysed using an in vitro culture system which allowed cells to propagate from the biopsies to culture medium. The numbers of outgrowing cells were correlated with morphological and immunohistochemical signs of rejection. When immunosuppressive treatment was administered for 2 and four days after acute rejection, histology did not reveal any improvement, however cellular propagation was reduced by 50 and 75%, respectively. Using the tissue culture technique in human transplanted kidney grafts, which was originally developed for the animal model, the number of propagated cells measured was profoundly higher in grafts with acute cellular rejection than from grafts in other groups. In some cases the number of propagated cells was better correlated with the clinical outcome than the diagnosis made by morphological evaluation. To determine immune responses to cytomegalovirus (CMV), we utilised Human Leukocyte Antigen (HLA) tetramer staining and stimulation of T cells with viral antigens. Both of these techniques independently detected CMV specific T cells in immunosuppressed and healthy individuals with latent or active infection. Although the frequency of CMV specific T cells did not differ between groups, there was a functional impairment in immunosuppressed patients as evidenced by reduced interferon-gamma production. In conclusion, these techniques can be used to determine the cellular immune response to allografts and cytomegalovirus and prove valuable for the optimization of immunosuppressive protocols and antiviral treatment.
|
|
| 6. |
- Engstrand, Mats, et al.
(författare)
-
Cellular responses to cytomegalovirus in immunosuppressed patients : circulating CD8+ T cells recognizing CMVpp65 are present but display functional impairment
- 2003
-
Ingår i: Clinical and Experimental Immunology. - : Oxford University Press (OUP). - 0009-9104 .- 1365-2249. ; 132:1, s. 96-104
-
Tidskriftsartikel (refereegranskat)abstract
- The availability of tetrameric complexes of HLA class I molecules folded with immunodominant peptides makes it possible to utilize flow cytometry for rapid and highly specific visualization of virus specific CD8+ T cells. An alternate technique is to incubate whole blood with specific antigens and to subsequently detect and characterize responding T cells (e.g. by performing intracellular staining of interferon-gamma). By using an HLA-A2 tetramer construct folded with the same immunodominant CMV-peptide as that used for peptide pulsing, we monitored both the presence and functional capacity of CMV-specific CD8+ T cells. In addition T cell activation was assayed by determination of CD38 and CD69 expression. Twelve organ transplant patients and 31 healthy blood donors with latent CMV infection were investigated using CMV pp65 tetramer staining and intracellular staining of interferon-gamma after CMV pp65 peptide pulsing or CMV lysate pulsing. CMV-specific T cells were detected in similar absolute numbers as well as frequencies of T cells in the two groups investigated. However, the CMV-specific CD8+ T cells in immunosuppressed individuals showed a decreased functional response to the CMV-peptide, as evidenced by reduced interferon-gamma production when compared to healthy blood donors (19%; 42%, P < 0·005). In addition, CD38 expression was markedly higher in immunosuppressed patients compared to healthy blood donors (24%; 6%, P < 0·005). In a case report we demonstrate that reactivation of CMV can occur in an immunosuppressed patient with high number of CMV-specific T cells, but without functional capacity. Hence, these findings reflect impaired activation of cytotoxic T cells controlling latent CMV infection in immunosuppressed patients.
|
|
| 7. |
- Engstrand, Mats, et al.
(författare)
-
Characterization of CMVpp65-specific CD8+ T lymphocytes using MHC tetramers in kidney transplant patients and healthy participants
- 2000
-
Ingår i: Transplantation. - : Ovid Technologies (Wolters Kluwer Health). - 0041-1337 .- 1534-6080. ; 69:11, s. 2243-2250
-
Tidskriftsartikel (refereegranskat)abstract
- BACKGROUND: Cytomegalovirus (CMV) is a ubiquitous herpesvirus that infects 50-90% of individuals in different populations. After primary infection, the virus persists latently in myeloid cells under the control of specific T-cells. Reactivation of CMV infection may cause lethal organ dysfunction and is frequently seen in immunosuppressed individuals. CD8+ cytotoxic T-cells (CTL) have a primary role in suppressing CMV reactivation, and the dominating CTL response is directed against pp65. METHODS: MHC tetramers, that is, complexes between HLA class I (or class II) molecules and antigenic peptides conjugated to fluorochromes allow the direct visualization of antigen-specific receptor-carrying T-cells using flow cytometry. We constructed a novel MHC tetramer for identification of CMVpp65-specific CD8+ T-cells using HLA-A2 molecules folded with the immunodominant NLVPMVATV peptide. RESULTS: The A2/pp65 tetramer specifically stained CMV-directed T-cell lines, and sorted cells showed CMV-specific cytotoxicity. High proportions (0.1-9%) of the CD8+ T-cells were A2/pp65 tetramer+ in healthy HLA-A2+ CMV carriers and in immunosuppressed kidney transplant patients with latent infection. Patients with reactivated CMV infection exhibited up to 15% A2/pp65 tetramer+ cells, which seemed to correlate with CMV load over time. A2/pp65 tetramer+ cells expressed T-cell activation markers. CONCLUSIONS: The construction of a novel A2/pp65 MHC tetramer enabled the design of a rapid and precise flow cytometric method allowing quantitative and qualitative analysis of CMV-specific T-cells. The number of A2/pp65 tetramer binding CTLs in blood may prove to be clinically relevant in assessing the immune response to CMV.
|
|
| 8. |
- Engstrand, Mats, et al.
(författare)
-
Lymphocyte propagation from biopsies of kidney allografts
- 2006
-
Ingår i: Transplant Immunology. - : Elsevier BV. - 0966-3274 .- 1878-5492. ; 16:3-4, s. 215-219
-
Tidskriftsartikel (refereegranskat)abstract
- Morphological evaluation of transplant biopsies, usually using the Banff classification, is the most important tool to diagnose rejection after kidney transplantation. However, morphological analysis only scores the amount and localisation of infiltrating cells, and studies show that up to 30% of grafts with a stable function display infiltration of lymphocytes consistent with acute cellular rejection. Methods to study the functional properties of the infiltrating lymphocytes are therefore needed. We applied a tissue culture system on biopsies from transplanted human kidneys, allowing infiltrating cells to propagate out from the tissue. Cells were then counted and subtyped by flow cytometry. The results were correlated to morphology. In total, 92 biopsies from 69 patients were analysed. For 14 patients, serial biopsies were available. In grafts with cellular or combined cellular and vascular rejection, the number of ex vivo propagated mononuclear cells was higher than from non-rejecting grafts. A similar pattern was seen for CD3(+) T cells as well as for T cells expressing CD25 or MHC class II antigens. However, the proportion of CD25(+) or MHC class II(+) T lymphocytes was similar in all groups (no rejection, vascular rejection, borderline changes, cellular rejection, combined cellular and vascular rejection). In all groups the number of CD4(+) cells was higher than the number of CD8(+) cells. The results confirm previous experimental studies showing that graft-infiltrating cells are possible to culture in vitro and that lymphocyte propagation correlates to acute cellular rejection. Tissue culturing is easy to perform and evaluate and can be used to determine and analyse the cellular immune response to allografts and may thus be used as a complement to morphological analyses.
|
|
| 9. |
|
|
| 10. |
- Engstrand, Per, Professor, 1955-, et al.
(författare)
-
Decrease in strengthalong a process line for SC paper
- 2019
-
Ingår i: Fundamental Mechanical Pulp Research Seminar, FMPRS2019, Norrköping, SwedenArranged by Mid Sweden University in cooperatrion with Holmen AB, Valmet AB, AF AB and Treesearch..
-
Konferensbidrag (refereegranskat)
|
|
