| 1. |
- Biollaz, S., et al.
(författare)
-
Gas analysis in gasification of biomass and waste : Guideline report: Document 1
- 2018
-
Rapport (refereegranskat)abstract
- Gasification is generally acknowledged as one of the technologies that will enable the large-scale production of biofuels and chemicals from biomass and waste. One of the main technical challenges associated to the deployment of biomass gasification as a commercial technology is the cleaning and upgrading of the product gas. The contaminants of product gas from biomass/waste gasification include dust, tars, alkali metals, BTX, sulphur-, nitrogen- and chlorine compounds, and heavy metals. Proper measurement of the components and contaminants of the product gas is essential for the monitoring of gasification-based plants (efficiency, product quality, by-products), as well as for the proper design of the downstream gas cleaning train (for example, scrubbers, sorbents, etc.). In practice, a trade-off between reliability, accuracy and cost has to be reached when selecting the proper analysis technique for a specific application. The deployment and implementation of inexpensive yet accurate gas analysis techniques to monitor the fate of gas contaminants might play an important role in the commercialization of biomass and waste gasification processes.This special report commissioned by the IEA Bioenergy Task 33 group compiles a representative part of the extensive work developed in the last years by relevant actors in the field of gas analysis applied to(biomass and waste) gasification. The approach of this report has been based on the creation of a team of contributing partners who have supplied material to the report. This networking approach has been complemented with a literature review. The report is composed of a set of 2 documents. Document 1(the present report) describes the available analysis techniques (both commercial and underdevelopment) for the measurement of different compounds of interest present in gasification gas. The objective is to help the reader to properly select the analysis technique most suitable to the target compounds and the intended application. Document 1 also describes some examples of application of gas analysis at commercial-, pilot- and research gasification plants, as well as examples of recent and current joint research activities in the field. The information contained in Document 1 is complemented with a book of factsheets on gas analysis techniques in Document 2, and a collection of video blogs which illustrate some of the analysis techniques described in Documents 1 and 2.This guideline report would like to become a platform for the reinforcement of the network of partners working on the development and application of gas analysis, thus fostering collaboration and exchange of knowledge. As such, this report should become a living document which incorporates in future coming progress and developments in the field.
|
|
| 2. |
- Biollaz, S., et al.
(författare)
-
Gas analysis in gasification of biomass and waste : Guideline report: Document 2 - Factsheets on gas analysis techniques
- 2018
-
Rapport (refereegranskat)abstract
- Gasification is generally acknowledged as one of the technologies that will enable the large-scale production of biofuels and chemicals from biomass and waste. One of the main technical challenges associated to the deployment of biomass gasification as a commercial technology is the cleaning and upgrading of the product gas. The contaminants of product gas from biomass/waste gasification include dust, tars, alkali metals, BTX, sulphur-, nitrogen- and chlorine compounds, and heavy metals. Proper measurement of the components and contaminants of the product gas is essential for the monitoring of gasification-based plants (efficiency, product quality, by-products), as well as for the proper design of the downstream gas cleaning train (for example, scrubbers, sorbents, etc.). The deployment and implementation of inexpensive yet accurate gas analysis techniques to monitor the fate of gas contaminants might play an important role in the commercialization of biomass and waste gasification processes.This special report commissioned by the IEA Bioenergy Task 33 group compiles a representative part of the extensive work developed in the last years by relevant actors in the field of gas analysis applied to (biomass and waste) gasification. The approach of this report has been based on the creation of a team of contributing partners who have supplied material to the report. This networking approach has been complemented with a literature review. This guideline report would like to become a platform for the reinforcement of the network of partners working on the development and application of gas analysis, thus fostering collaboration and exchange of knowledge. As such, this report should become a living document which incorporates in future coming progress and developments in the field.
|
|
| 3. |
- Hikmat, O., et al.
(författare)
-
The impact of gender, puberty, and pregnancy in patients with POLG disease
- 2020
-
Ingår i: Annals of Clinical and Translational Neurology. - : Wiley. - 2328-9503. ; 7:10, s. 2019-2025
-
Tidskriftsartikel (refereegranskat)abstract
- Objective To study the impact of gender, puberty, and pregnancy on the expression of POLG disease, one of the most common mitochondrial diseases known. Methods Clinical, laboratory, and genetic data were collected retrospectively from 155 patients with genetically confirmed POLG disease recruited from seven European countries. We used the available data to study the impact of gender, puberty, and pregnancy on disease onset and deterioration. Results We found that disease onset early in life was common in both sexes but there was also a second peak in females around the time of puberty. Further, pregnancy had a negative impact with 10 of 14 women (71%) experiencing disease onset or deterioration during pregnancy. Interpretation Gender clearly influences the expression of POLG disease. While onset very early in life was common in both males and females, puberty in females appeared associated both with disease onset and increased disease activity. Further, both disease onset and deterioration, including seizure aggravation and status epilepticus, appeared to be associated with pregnancy. Thus, whereas disease activity appears maximal early in life with no subsequent peaks in males, both menarche and pregnancy appear associated with disease onset or worsening in females. This suggests that hormonal changes may be a modulating factor.
|
|
| 4. |
- Olive, M, et al.
(författare)
-
Myoglobinopathy is an adult-onset autosomal dominant myopathy with characteristic sarcoplasmic inclusions
- 2019
-
Ingår i: Nature communications. - : Springer Science and Business Media LLC. - 2041-1723. ; 10:1, s. 1396-
-
Tidskriftsartikel (refereegranskat)abstract
- Myoglobin, encoded by MB, is a small cytoplasmic globular hemoprotein highly expressed in cardiac myocytes and oxidative skeletal myofibers. Myoglobin binds O2, facilitates its intracellular transport and serves as a controller of nitric oxide and reactive oxygen species. Here, we identify a recurrent c.292C>T (p.His98Tyr) substitution in MB in fourteen members of six European families suffering from an autosomal dominant progressive myopathy with highly characteristic sarcoplasmic inclusions in skeletal and cardiac muscle. Myoglobinopathy manifests in adulthood with proximal and axial weakness that progresses to involve distal muscles and causes respiratory and cardiac failure. Biochemical characterization reveals that the mutant myoglobin has altered O2 binding, exhibits a faster heme dissociation rate and has a lower reduction potential compared to wild-type myoglobin. Preliminary studies show that mutant myoglobin may result in elevated superoxide levels at the cellular level. These data define a recognizable muscle disease associated with MB mutation.
|
|
| 5. |
|
|
| 6. |
- Hikmat, O., et al.
(författare)
-
Simplifying the clinical classification of polymerase gamma (POLG) disease based on age of onset; studies using a cohort of 155 cases
- 2020
-
Ingår i: Journal of Inherited Metabolic Disease. - : Wiley. - 0141-8955 .- 1573-2665. ; 43:4, s. 726-736
-
Tidskriftsartikel (refereegranskat)abstract
- Background: Variants in POLG are one of the most common causes of inherited mitochondrial disease. Phenotypic classification of POLG disease has evolved haphazardly making it complicated and difficult to implement in everyday clinical practise. The aim of our study was to simplify the classification and facilitate better clinical recognition. Methods: A multinational, retrospective study using data from 155 patients with POLG variants recruited from seven European countries. Results: We describe the spectrum of clinical features associated with POLG variants in the largest known cohort of patients. While clinical features clearly form a continuum, stratifying patients simply according to age of onset—onset prior to age 12 years; onset between 12 and 40 years and onset after the age of 40 years, permitted us to identify clear phenotypic and prognostic differences. Prior to 12 years of age, liver involvement (87%), seizures (84%), and feeding difficulties (84%) were the major features. For those with onset between 12 and 40 years, ataxia (90%), peripheral neuropathy (84%), and seizures (71%) predominated, while for those with onset over 40 years, ptosis (95%), progressive external ophthalmoplegia (89%), and ataxia (58%) were the major clinical features. The earlier the onset the worse the prognosis. Patients with epilepsy and those with compound heterozygous variants carried significantly worse prognosis. Conclusion: Based on our data, we propose a simplified POLG disease classification, which can be used to guide diagnostic investigations and predict disease course. © 2020 The Authors. Journal of Inherited Metabolic Disease published by John Wiley & Sons Ltd on behalf of SSIEM
|
|
| 7. |
|
|
| 8. |
- Pio, D. T., et al.
(författare)
-
Tar formation during eucalyptus gasification in a bubbling fluidized bed reactor : Effect of feedstock and reactor bed composition
- 2021
-
Ingår i: Energy Conversion and Management. - : Elsevier BV. - 0196-8904 .- 1879-2227. ; 229
-
Tidskriftsartikel (refereegranskat)abstract
- Tar compounds are inevitably present in the raw producer gas from biomass gasification and currently represent the main barrier for the commercial breakthrough of gasification technologies. In the present work, tar concentration in the producer gas from direct gasification of distinct types of residual forest biomass from eucalyptus in a 5 kWth bubbling fluidized bed reactor was investigated. The influence of the feedstock chemical composition and gasifier operation time was evaluated. Average tar concentration values in the raw producer gas were between 1.5 and 13.3 g/Nm3, representing a tar production between 8.4 and 67.0 g tar/kg biomass db, which surpasses suggested tar concentration limits for various potential applications for the producer gas. Major average tar compounds present in the tar sampled from the raw producer gas were benzene (47.1 %wt), toluene (21.6 %wt), naphthalene (10 %wt) and indene (6.4 %wt). A significant decay of the tar concentration in the producer gas was observed with increasing gasifier operation time, namely up to 50% within 45 min of operation, indicating its dependency on inorganics (e.g., CaCO3, KCl, maximum 5.5 %wt) and solid carbon (maximum 22.7 %wt) accumulation in the reactor bed.
|
|
| 9. |
- Ruivo, L. C. M., et al.
(författare)
-
Iron-based catalyst (Fe2-xNixTiO5) for tar decomposition in biomass gasification
- 2021
-
Ingår i: Fuel. - : Elsevier BV. - 0016-2361 .- 1873-7153. ; 300
-
Tidskriftsartikel (refereegranskat)abstract
- In this study, a novel Fe2-xNixTiO5 catalyst for potential applications in biomass gasification gas cleaning/ upgrading was investigated. The material was successfully synthesized through combined mechanical activation and microwave firing. Catalytic steam reforming was studied in a fixed bed tubular reactor, using a mixture of toluene and naphthalene as model tar compounds as well as downstream a fluidized bed gasifier. Fe2-xNixTiO5 catalyst showed high activity in converting the model compounds at temperatures higher than 700 degrees C. The catalyst exhibited a tar conversion of 78% at 800 degrees C when exposed to biomass-derived gas from a bubbling fluidized bed gasifier. Nevertheless, the catalytic activity declined with increased time on stream due to structural changes in iron active phases, caused by redox conditions of the producer gas. Furthermore, thermodynamic calculations suggest that sulfur chemisorption on the nickel surface, may also contribute to the catalyst deactivation.
|
|
| 10. |
|
|
