| 1. |
- Andrault, D, et al.
(författare)
-
Study of partial melting at high-pressure using in situ X-ray diffraction
- 2006
-
Ingår i: High Pressure Research. - : Informa UK Limited. - 0895-7959 .- 1477-2299. ; 26:3, s. 267-276
-
Tidskriftsartikel (refereegranskat)abstract
- The high-pressure melting behavior of different iron alloys was investigated using the classical synchrotron-based in situ X-ray diffraction techniques. As they offer specific advantages and disadvantages, both energy-dispersive (EDX) and angle-dispersive (ADX) X-ray diffraction methods were performed at the BL04B1 beamline of SPring8 (Japan) and at the ID27-30 beamline of the ESRF (France), respectively. High-pressure vessels and pressure ranges investigated include the Paris- Edinburgh press from 2 to 17GPa, the SPEED-1500 multi-anvil press from 10 to 27 GPa, and the laser-heated diamond anvil cell from 15 to 60 GPa. The onset of melting (at the solidus or eutectic temperature) can be easily detected using EDX because the grains start to rotate relative to the X-ray beam, which provokes rapid and drastic changes with time of the peak growth rate. Then, the degree of melting can be determined, using both EDX and ADX, from the intensity of diffuse X-ray scattering characteristic of the liquid phase. This diffuse contribution can be easily differentiated from the Compton diffusion of the pressure medium because they have different shapes in the diffraction patterns. Information about the composition and/or about the structure of the liquid phase can then be extracted from the shape of the diffuse X-ray scattering.
|
|
| 2. |
- Marcouille, O., et al.
(författare)
-
Production of high energy photons with in vacuum wigglers : From SOLEIL wiggler to MAXIV wiggler
- 2019
-
Ingår i: Proceedings of the 13th International Conference on Synchrotron Radiation Instrumentation, SRI 2018. - : Author(s). - 9780735417823 ; 2054
-
Konferensbidrag (refereegranskat)abstract
- Small gap wigglers become more and more attractive to produce high photon fluxes in the hard X-ray photon range. They use magnet blocks of high magnetization which resists much better to heating (baking, synchrotron radiation) than in the past, produce high magnetic field with numerous periods and are very compact. They also are a very good alternative to superconducting technology which requires special infrastructure, heavy maintenance and is not running cost free. SOLEIL, operating presently at 2.75 GeV has designed and built an in-vacuum wiggler of 38 periods of 50 mm producing 2.1 T at a minimum gap of 5.5 mm to delivered photon beam between 20 keV and 50 keV. Already in operation, further improvements are presently in progress to push photons towards higher energy, in particular thanks to the operation at lower gap (4.5 mm). MAX IV and SOLEIL, in the frame of collaboration, ave built an upgraded version of the existing SOLEIL wiggler with the target to extend the spectral range at high energy (above 50 keV) but also at low energy (4 keV) with the same insertion device. The design of the existing magnetic system has been modified to reach 2.4 T at a minimum gap of 4.2 mm and includes taper operation to avoid undulator structure in the radiated spectrum at low energy.
|
|
| 3. |
|
|
