| 1. |
- Admassie, Shimelis, et al.
(author)
-
Charge storage properties of biopolymer electrodes with (sub)tropical lignins
- 2014
-
In: Physical Chemistry, Chemical Physics - PCCP. - : Royal Society of Chemistry. - 1463-9076 .- 1463-9084. ; 16:45, s. 24681-24684
-
Journal article (peer-reviewed)abstract
- The electrochemical and charge storage properties of different lignins inside biopolymer electrodes were studied and correlated with the chemical variations of the lignins as indicated from the nuclear magnetic resonance (NMR) spectroscopic data. The varying fractions of monolignols were found to correlate with charge storage properties. It was found that as the sinapyl to guaiacyl (S/G) ratio increased both the specific capacitance and charge capacity increased considerably. This indicates that quinones generated on S-units can contribute more to charge storage in the biopolymer electrodes.
|
|
| 2. |
- Gadisa, Abay, et al.
(author)
-
Red and near infrared polarized light emissions from polyfluorene copolymer based light emitting diodes
- 2007
-
In: Appl. Phys. Lett. FIELD Full Journal Title:Applied Physics Letters. ; 90:11, s. 113510/1-113510/3
-
Journal article (peer-reviewed)abstract
- The authors report polarized red, electroluminescence peak at 705 nm and near IR, electroluminescence peak at 950 nm, light emission from light emitting diodes based on two polyfluorene copolymers. The copolymers are synthesized from a fluorene monomer combined with donor-acceptor-donor comonomers and designed to have a low band gap and form birefringent liq. cryst. phases. Emission occurs from aligned thin films of polymer layers. The emissive layers are aligned by spin coating on a layer of rubbed conducting polymer poly(3,4-ethylene dioxythiophene)-poly(styrene sulfonate) and thermally converted into glassy nematic liq. cryst. state. [on SciFinder (R)]
|
|
| 3. |
- Lin, Yuanbao, et al.
(author)
-
One-Step Blade-Coated Highly Efficient Nonfullerene Organic Solar Cells with a Self-Assembled Interfacial Layer Enabled by Solvent Vapor Annealing
- 2019
-
In: Solar RRL. - : Wiley. - 2367-198X. ; 3:8
-
Journal article (peer-reviewed)abstract
- A pronounced enhancement of the power conversion efficiency (PCE) by 38% is achieved in one-step doctor-blade printing organic solar cells (OSCs) via a simple solvent vapor annealing (SVA) step. The organic blend composed of a donor polymer, a nonfullerene acceptor, and an interfacial layer (IL) molecular component is found to phase-separate vertically when exposed to a solvent vapor-saturated atmosphere. Remarkably, the spontaneous formation of a fine, self-organized IL between the bulk heterojunction (BHJ) layer and the indium tin oxide (ITO) electrode facilitated by SVA yields solar cells with a significantly higher PCE (11.14%) than in control devices (8.05%) without SVA and in devices (10.06%) made with the more complex two-step doctor-blade printing method. The stratified nature of the ITO/IL/BHJ/cathode is corroborated by a range of complementary characterization techniques including surface energy, cross-sectional scanning electron microscopy, grazing incidence wide angle X-ray scattering, and X-ray photoelectron spectroscopy. This study demonstrates that a spontaneously formed IL with SVA treatment combines simplicity and precision with high device performance, thus making it attractive for large-area manufacturing of next-generation OSCs.
|
|
| 4. |
- Ma, Z. F., et al.
(author)
-
Structure-Property Relationships of Oligothiophene-Isoindigo Polymers for Efficient Bulk-Heterojunction Solar Cells
- 2014
-
In: Energy and Environmental Sciences. - 1754-5692 .- 1754-5706. ; 7:1, s. 361-369
-
Journal article (peer-reviewed)abstract
- A series of alternating oligothiophene (nT)–isoindigo (I) copolymers (PnTI) were synthesized to investigate the influence of the oligothiophene block length on the photovoltaic (PV) properties of PnTI:PCBM bulk-heterojunction blends. Our study indicates that the number of thiophene rings (n) in the repeating unit alters both polymer crystallinity and polymer–fullerene interfacial energetics, which results in a decreasing open-circuit voltage (Voc) of the solar cells with increasing n. The short-circuit current density (Jsc) of P1TI:PCBM devices is limited by the absence of a significant driving force for electron transfer. Instead, blends based on P5TI and P6TI feature large polymer domains, which limit charge generation and thus Jsc. The best PV performance with a power conversion efficiency of up to 6.9% was achieved with devices based on P3TI, where a combination of a favorable morphology and an optimal interfacial energy level offset ensures efficient exciton separation and charge generation. The structure–property relationship demonstrated in this work would be a valuable guideline for the design of high performance polymers with small energy losses during the charge generation process, allowing for the fabrication of efficient solar cells that combine a minimal loss in Voc with a high Jsc.
|
|
| 5. |
|
|
