| 1. |
|
|
| 2. |
- Meisl, Christina J., et al.
(författare)
-
Nomograms including the UBC (R) Rapid test to detect primary bladder cancer based on a multicentre dataset
- 2022
-
Ingår i: BJU International. - : John Wiley & Sons. - 1464-4096 .- 1464-410X. ; 130:6, s. 754-763
-
Tidskriftsartikel (refereegranskat)abstract
- Objectives To evaluate the clinical utility of the urinary bladder cancer antigen test UBC (R) Rapid for the diagnosis of bladder cancer (BC) and to develop and validate nomograms to identify patients at high risk of primary BC. Patients and Methods Data from 1787 patients from 13 participating centres, who were tested between 2012 and 2020, including 763 patients with BC, were analysed. Urine samples were analysed with the UBC (R) Rapid test. The nomograms were developed using data from 320 patients and externally validated using data from 274 patients. The diagnostic accuracy of the UBC (R) Rapid test was evaluated using receiver-operating characteristic curve analysis. Brier scores and calibration curves were chosen for the validation. Biopsy-proven BC was predicted using multivariate logistic regression. Results The sensitivity, specificity, and area under the curve for the UBC (R) Rapid test were 46.4%, 75.5% and 0.61 (95% confidence interval [CI] 0.58-0.64) for low-grade (LG) BC, and 70.5%, 75.5% and 0.73 (95% CI 0.70-0.76) for high-grade (HG) BC, respectively. Age, UBC (R) Rapid test results, smoking status and haematuria were identified as independent predictors of primary BC. After external validation, nomograms based on these predictors resulted in areas under the curve of 0.79 (95% CI 0.72-0.87) and 0.95 (95% CI: 0.92-0.98) for predicting LG-BC and HG-BC, respectively, showing excellent calibration associated with a higher net benefit than the UBC (R) Rapid test alone for low and medium risk levels in decision curve analysis. The R Shiny app allows the results to be explored interactively and can be accessed at www.blucab-index. net. Conclusion The UBC (R) Rapid test alone has limited clinical utility for predicting the presence of BC. However, its combined use with BC risk factors including age, smoking status and haematuria provides a fast, highly accurate and non-invasive tool for screening patients for primary LG-BC and especially primary HG-BC.
|
|
| 3. |
- Albrecht, Stefano V., et al.
(författare)
-
Reports on the 2015 AAAI Workshop Series
- 2015
-
Ingår i: The AI Magazine. - : Wiley. - 0738-4602 .- 2371-9621. ; 36:2, s. 90-101
-
Tidskriftsartikel (refereegranskat)abstract
- AAAI's 2015 Workshop Program was held Sunday and Monday, January 25-26, 2015, at the Hyatt Regency Austin Hotel in Austin, Texas, USA. The AAAI-15 workshop program included 16 workshops covering a wide range of topics in artificial intelligence. Most workshops were held on a single day. The titles of the workshops included Algorithm Configuration; Artificial Intelligence and Ethics; Artificial Intelligence Applied to Assistive Technologies and Smart Environments; Artificial Intelligence for Cities; Artificial Intelligence for Transportation: Advice, Inter-activity, and Actor Modeling; Beyond the Turing Test; Computational Sustainability; Computer Poker and Imperfect Information; Incentive and Trust in E-Communities; Knowledge, Skill, and Behavior Transfer in Autonomous Robots; Learning for General Competency in Video Games; Multiagent Interaction without Prior Coordination; Planning, Search, and Optimization; Scholarly Big Data: AI Perspectives, Challenges, and Ideas; Trajectory-Based Behaviour Analytics; and World Wide Web and Public Health Intelligence.
|
|
| 4. |
- Bott, Lukas Thomas, et al.
(författare)
-
Coulomb dissociation of O-16 into He-4 and C-12
- 2023
-
Ingår i: NUCLEAR PHYSICS IN ASTROPHYSICS - X, NPA-X 2022. - : EDP Sciences. - 2100-014X. ; 279
-
Konferensbidrag (refereegranskat)abstract
- We measured the Coulomb dissociation of O-16 into He-4 and C-12 within the FAIR Phase-0 program at GSI Helmholtzzentrum fur Schwerionenforschung Darmstadt, Germany. From this we will extract the photon dissociation cross section O-16(alpha,gamma)C-12, which is the time reversed reaction to C-12(alpha,gamma)O-16. With this indirect method, we aim to improve on the accuracy of the experimental data at lower energies than measured so far. The expected low cross section for the Coulomb dissociation reaction and close magnetic rigidity of beam and fragments demand a high precision measurement. Hence, new detector systems were built and radical changes to the (RB)-B-3 setup were necessary to cope with the high-intensity O-16 beam. All tracking detectors were designed to let the unreacted O-16 ions pass, while detecting the C-12 and He-4.
|
|
| 5. |
- Heimann, Mikael, et al.
(författare)
-
2-Year-Olds Learning From 2D Media With and Without Parental Support : Comparing Two Forms of Joint Media Engagement With Passive Viewing and Learning From 3D
- 2021
-
Ingår i: Frontiers in Psychology. - : Frontiers Media S.A.. - 1664-1078. ; 11
-
Tidskriftsartikel (refereegranskat)abstract
- The study investigates to what degree two different joint media engagement (JME) strategies affect childrens learning from two-dimensional (2D)-media. More specifically, we expected an instructed JME strategy to be more effective than a spontaneous, non-instructed, JME strategy. Thirty-five 2-year old children saw a short video on a tablet demonstrating memory tasks together with a parent. The parents were randomized into two groups: One group (N = 17) was instructed to help their child by describing the actions they saw on the video while the other group (N = 18) received no specific instruction besides "do as you usually do." The parents in the instructed group used significantly more words and verbs when supporting their child but both groups of children did equally well on the memory test. In a second step, we compared the performance of the two JME groups with an opportunistic comparison group (N = 95) tested with half of the memory tasks live and half of the tasks on 2D without any JME support. Results showed that the JME intervention groups received significantly higher recall scores than the no JME 2D comparison group. In contrast, the three-dimensional (3D) comparison group outperformed both JME groups. In sum, our findings suggest that JME as implemented here is more effective in promoting learning than a no JME 2D demonstration but less so than the standard 3D presentation of the tasks.
|
|
| 6. |
- Hoppmann-Baum, Kai, et al.
(författare)
-
Length-Constrained Cycle Partition with an Application to UAV Routing
- 2020
-
Rapport (övrigt vetenskapligt/konstnärligt)abstract
- In this article, we discuss the Length-Constrained Cycle Partition Problem (LCCP). Besides edge weights, the undirected graph in LCCP features an individual critical weight value for each vertex. A cycle partition, i.e., a vertex disjoint cycle cover, is a feasible solution if the length of each cycle is not greater than the critical weight of each of the vertices in the cycle. The goal is to find a feasible partition with the minimum number of cycles. In this article, we discuss theoretical properties, preprocessing techniques, and two mixed-integer programming models (MIP) for LCCP both inspired by formulations for the closely related Travelling Salesperson Problem (TSP). Further, we introduce conflct hypergraphs, whose cliques yield valid constraints for the MIP models. We conclude with a report on computational experiments conducted on (A)TSPLIB-based instances. As an example, we use a routing problem in which a set of uncrewed aerial vehicles (UAVs) patrols a set of areas.
|
|
| 7. |
- Hoppmann-Baum, Kai, et al.
(författare)
-
Length-constrained cycle partition with an application to UAV routing*
- 2022
-
Ingår i: Optimization Methods and Software. - : TAYLOR & FRANCIS LTD. - 1055-6788 .- 1029-4937. ; 37:6, s. 2080-2116
-
Tidskriftsartikel (refereegranskat)abstract
- This article discusses the Length-Constrained Cycle Partition Problem (LCCP), which constitutes a new generalization of the Travelling Salesperson Problem (TSP). Apart from nonnegative edge weights, the undirected graph in LCCP features a nonnegative critical length parameter for each vertex. A cycle partition, i.e. a vertex-disjoint cycle cover, is a feasible solution for LCCP if the length of each cycle is not greater than the critical length of each vertex contained in it. The goal is to find a feasible partition having a minimum number of cycles. Besides analyzing theoretical properties and developing preprocessing techniques, we propose an elaborate heuristic algorithm that produces solutions of good quality even for large-size instances. Moreover, we present two exact mixed-integer programming formulations (MIPs) for LCCP, which are inspired by well-known modeling approaches for TSP. Further, we introduce the concept of conflict hypergraphs, whose cliques yield valid constraints for the MIP models. We conclude with a discussion on computational experiments that we conducted using (A)TSPLIB-based problem instances. As a motivating example application, we describe a routing problem where a fleet of uncrewed aerial vehicles (UAVs) must patrol a given set of areas.
|
|
| 8. |
- Hoppmann, Kai, et al.
(författare)
-
Minimum Cycle Partition with Length Requirements
- 2020
-
Ingår i: Integration of Constraint Programming, Artificial Intelligence, and Operations Research. - Cham : Springer International Publishing. - 9783030589417 ; , s. 273-282
-
Konferensbidrag (refereegranskat)abstract
- In this article we introduce a Minimum Cycle Partition Problem with Length Requirements (CPLR). This generalization of the Travelling Salesman Problem (TSP) originates from routing Unmanned Aerial Vehicles (UAVs). Apart from nonnegative edge weights, CPLR has an individual critical weight value associated with each vertex. A cycle partition, i.e., a vertex disjoint cycle cover, is regarded as a feasible solution if the length of each cycle, which is the sum of the weights of its edges, is not greater than the critical weight of each of its vertices. The goal is to find a feasible partition, which minimizes the number of cycles. In this article, a heuristic algorithm is presented together with a Mixed Integer Programming (MIP) formulation of CPLR. We furthermore introduce a conflict graph, whose cliques yield valid constraints for the MIP model. Finally, we report on computational experiments conducted on TSPLIB-based test instances.
|
|
| 9. |
- Klionsky, Daniel J., et al.
(författare)
-
Guidelines for the use and interpretation of assays for monitoring autophagy
- 2012
-
Ingår i: Autophagy. - : Informa UK Limited. - 1554-8635 .- 1554-8627. ; 8:4, s. 445-544
-
Forskningsöversikt (refereegranskat)abstract
- In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. A key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process vs. those that measure flux through the autophagy pathway (i.e., the complete process); thus, a block in macroautophagy that results in autophagosome accumulation needs to be differentiated from stimuli that result in increased autophagic activity, defined as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (in most higher eukaryotes and some protists such as Dictyostelium) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the field understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field.
|
|
| 10. |
- Ma, Weimin, et al.
(författare)
-
Experimental and numerical study on lead-bismuth heat transfer in a fuel rod simulator
- 2011
-
Ingår i: Journal of Nuclear Materials. - : Elsevier BV. - 0022-3115 .- 1873-4820. ; 415:3, s. 415-424
-
Tidskriftsartikel (refereegranskat)abstract
- As a task of the EU project IP EUROTRANS towards development of an Accelerator Driven System (ADS) dedicated to the transmutation of long-lived fission products, experiments and simulations were performed on the TALL test facility at KTH to investigate thermal hydraulics along a single fuel rod simulator cooled by lead-bismuth eutectic (LBE). The fuel rod simulator is concentrically inserted in a tube, so that an annular channel is formed for LBE flow. This paper presents the measured temperature profiles in the annular channel, and the comparisons with the simulation results of the CFX code. The primary objective is to help understanding the LBE heat transfer characteristics and qualifying the turbulence and heat transfer modeling for LBE application. The quantitative comparison between the calculated and measured temperatures of the LBE indicates that the simulation underestimates the experiment at most radial and axial positions. Finally the uncertainties in measurement and the deficiency in turbulence models resulting in such a disagreement were discussed, which will be directive and beneficial to future work in the field.
|
|
