1. |
- Kristanl, Matej, et al.
(författare)
-
The Seventh Visual Object Tracking VOT2019 Challenge Results
- 2019
-
Ingår i: 2019 IEEE/CVF INTERNATIONAL CONFERENCE ON COMPUTER VISION WORKSHOPS (ICCVW). - : IEEE COMPUTER SOC. - 9781728150239 ; , s. 2206-2241
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2019 is the seventh annual tracker benchmarking activity organized by the VOT initiative. Results of 81 trackers are presented; many are state-of-the-art trackers published at major computer vision conferences or in journals in the recent years. The evaluation included the standard VOT and other popular methodologies for short-term tracking analysis as well as the standard VOT methodology for long-term tracking analysis. The VOT2019 challenge was composed of five challenges focusing on different tracking domains: (i) VOT-ST2019 challenge focused on short-term tracking in RGB, (ii) VOT-RT2019 challenge focused on "real-time" short-term tracking in RGB, (iii) VOT-LT2019 focused on long-term tracking namely coping with target disappearance and reappearance. Two new challenges have been introduced: (iv) VOT-RGBT2019 challenge focused on short-term tracking in RGB and thermal imagery and (v) VOT-RGBD2019 challenge focused on long-term tracking in RGB and depth imagery. The VOT-ST2019, VOT-RT2019 and VOT-LT2019 datasets were refreshed while new datasets were introduced for VOT-RGBT2019 and VOT-RGBD2019. The VOT toolkit has been updated to support both standard short-term, long-term tracking and tracking with multi-channel imagery. Performance of the tested trackers typically by far exceeds standard baselines. The source code for most of the trackers is publicly available from the VOT page. The dataset, the evaluation kit and the results are publicly available at the challenge website(1).
|
|
2. |
- Kristan, Matej, et al.
(författare)
-
The first visual object tracking segmentation VOTS2023 challenge results
- 2023
-
Ingår i: 2023 IEEE/CVF International conference on computer vision workshops (ICCVW). - : Institute of Electrical and Electronics Engineers Inc.. - 9798350307443 - 9798350307450 ; , s. 1788-1810
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking Segmentation VOTS2023 challenge is the eleventh annual tracker benchmarking activity of the VOT initiative. This challenge is the first to merge short-term and long-term as well as single-target and multiple-target tracking with segmentation masks as the only target location specification. A new dataset was created; the ground truth has been withheld to prevent overfitting. New performance measures and evaluation protocols have been created along with a new toolkit and an evaluation server. Results of the presented 47 trackers indicate that modern tracking frameworks are well-suited to deal with convergence of short-term and long-term tracking and that multiple and single target tracking can be considered a single problem. A leaderboard, with participating trackers details, the source code, the datasets, and the evaluation kit are publicly available at the challenge website1
|
|
3. |
- Bai, Yang, et al.
(författare)
-
Geometry design of tethered small-molecule acceptor enables highly stable and efficient polymer solar cells
- 2023
-
Ingår i: Nature Communications. - : NATURE PORTFOLIO. - 2041-1723. ; 14:1
-
Tidskriftsartikel (refereegranskat)abstract
- With the power conversion efficiency of binary polymer solar cells dramatically improved, the thermal stability of the small-molecule acceptors raised the main concerns on the device operating stability. Here, to address this issue, thiophene-dicarboxylate spacer tethered small-molecule acceptors are designed, and their molecular geometries are further regulated via the thiophene-core isomerism engineering, affording dimeric TDY-alpha with a 2, 5-substitution and TDY-beta with 3, 4-substitution on the core. It shows that TDY-alpha processes a higher glass transition temperature, better crystallinity relative to its individual small-molecule acceptor segment and isomeric counterpart of TDY-beta, and amore stablemorphology with the polymer donor. As a result, the TDY-alpha based device delivers a higher device efficiency of 18.1%, and most important, achieves an extrapolated lifetime of about 35000 hours that retaining 80% of their initial efficiency. Our result suggests that with proper geometry design, the tethered small-molecule acceptors can achieve both high device efficiency and operating stability.
|
|
4. |
- Li, Shangyu, et al.
(författare)
-
Tethered Small-Molecule Acceptors Simultaneously Enhance the Efficiency and Stability of Polymer Solar Cells
- 2023
-
Ingår i: Advanced Materials. - : WILEY-V C H VERLAG GMBH. - 0935-9648 .- 1521-4095. ; 35
-
Tidskriftsartikel (refereegranskat)abstract
- For polymer solar cells (PSCs), the mixture of polymer donors and small-molecule acceptors (SMAs) is fine-tuned to realize a favorable kinetically trapped morphology and thus a commercially viable device efficiency. However, the thermodynamic relaxation of the mixed domains within the blend raises concerns related to the long-term operational stability of the devices, especially in the record-holding Y-series SMAs. Here, a new class of dimeric Y6-based SMAs tethered with differential flexible spacers is reported to regulate their aggregation and relaxation behavior. In their polymer blends with PM6, it is found that they favor an improved structural order relative to that of Y6 counterpart. Most importantly, the tethered SMAs show large glass transition temperatures to suppress the thermodynamic relaxation in mixed domains. For the high-performing dimeric blend, an unprecedented open circuit voltage of 0.87 V is realized with a conversion efficiency of 17.85%, while those of regular Y6-base devices only reach 0.84 V and 16.93%, respectively. Most importantly, the dimer-based device possesses substantially reduced burn-in efficiency loss, retaining more than 80% of the initial efficiency after operating at the maximum power point under continuous illumination for 700 h. The tethering approach provides a new direction to develop PSCs with high efficiency and excellent operating stability.
|
|
5. |
- Zhong, Kai, et al.
(författare)
-
Direct measurements and CFD simulations on ice-induced hull pressure of a ship in floe ice fields
- 2023
-
Ingår i: Ocean Engineering. - : Elsevier BV. - 0029-8018. ; 272
-
Tidskriftsartikel (refereegranskat)abstract
- Floe ice fields are expected to replace level ice to be the most common environment for future polar sea transportation under the long-term trend of global warming. In this study, the authors aim to develop a viable analysis procedure to predict the ice-induced hull pressure characteristics for ships navigating in floe ice fields. A novel ice model test procedure is established, which is characterized by making use of non-refrigerated synthetic model ice and tactile pressure sensors to measure the hull pressure. The numerical tool is based on a state-of-the-art CFD-DEM numerical framework; a novel method to monitor the hull pressure during the interaction between the hull and ice floes during the CFD-DEM simulations. Statistical analysis indicates the probability distributions of the ice pressure from the experiment and the numerical results are comparable. Besides, the impacts of ship speed and ice floe concentration on the hull pressure distribution are also examined. Increasing speed and ice concentration will make the probability distribution of ice pressure shift towards the high-pressure going interval, resulting in an increased mean of ice pressure. It is also found that increased speed leads to a smaller variance, while increased ice concentration results in a larger variance.
|
|
6. |
- Xia, Yangyang, et al.
(författare)
-
Prediction of bending strength of glass fiber reinforced methacrylate-based pipeline UV-CIPP rehabilitation materials based on machine learning
- 2023
-
Ingår i: Tunnelling and Underground Space Technology. - : Elsevier. - 0886-7798 .- 1878-4364. ; 140
-
Tidskriftsartikel (refereegranskat)abstract
- Ultraviolet cured-in-place-pipe (UV-CIPP) materials are commonly used in trenchless pipeline rehabilitation. Their bending strength is a crucial indicator to evaluate the curing quality. Studies show that this indicator is affected by multiple factors, including the curing time, UV lamp curing power, curing distance, and material thickness. Laboratory experiments have limitations in analyzing the effect of multiple factors on the bending strength of UV-CIPP materials and quantitatively predicting the optimum curing parameters. Aiming at resolving these shortcomings, resolve machine learning techniques were applied to predict the bending strength. In this regard, the surface curing reaction temperature monitoring data and three-point bending data of 30 groups of UV-CIPP material under the influence of different curing parameters were used as a dataset to predict the bending strength of UV-CIPP material. The results show that the influence degree of each factor on the bending strength of the UV-CIPP material, from high to low, is as follows: UV lamp power (−0.439), the temperature at the illuminated side (−0.392), curing time (−0.323), the temperature at the back side (−0.233), curing distance (0.143) and material thickness (−0.140). The best penalty parameter c (44.435) and width g (0.072) of the kernel function in the support vector machine (SVM) model were obtained using the genetic algorithm (GA) optimization, and the results were compared with the grey wolf optimizer (GWO) and particle swarm optimization (PSO). The performed analyses revealed that the developed GA-SVM model exhibits the best prediction results compared to other machine learning algorithms. The optimum bending strength of the UV-CIPP material used in this test is 294.77 MPa, which corresponds to the curing time, UV lamp power, curing distance, material thickness, light side temperature, and back side temperature of 7.59 min, 157.33 mW/cm2, 189.99 mm, 4.38 mm, 79.49 °C, and 76.59 °C, respectively.
|
|
7. |
- Xian, Guang, et al.
(författare)
-
Study on the growth and wear behavior of the TiAlN-based composite coating deposited on TiCN-based cermets with different binder phase
- 2020
-
Ingår i: Wear. - : ELSEVIER SCIENCE SA. - 0043-1648 .- 1873-2577. ; 460
-
Tidskriftsartikel (refereegranskat)abstract
- The TiAlN-based composite coating was coated on TiCN-based cermets with different binder phase by arc ion plating. The effects of binder phase within cermets substrates on the microstructure, mechanical properties and wear behavior of the composite coating were investigated. The results show that the growth of the composite coating is affected by binder phase in the cermets substrates. With a higher content of Co binder in the cermets, the composite coating grows faster. Ni as a binder phase in the cermets is more favorable for the growth rate of the surface coating. The grain size of the coating on 10%Co-TiCN-based cermets is the finest and the hardness is the highest. The variation of binder phase in the cermets substrates leads to different adhesion strength of the composite coating. The adhesion strength of the composite coating on the 10%Co-TiCN-based cermets is the highest, which is because of the smallest differences in hardness and thermal expansion coefficient for this coating/substrate couple. The wear behavior of composite coating on 10%Co-TiCN-based substrate is dominated by abrasive wear while that on the other cermets with Ni binder or higher content of Co binder is a mixture form of diffusion wear, oxidation wear and abrasive wear.
|
|