| 1. |
- Ibrahim, Kassa Belay, et al.
(author)
-
Facile Electron Transfer in Atomically Coupled Heterointerface for Accelerated Oxygen Evolution
- 2023
-
In: Small. - : John Wiley & Sons. - 1613-6810 .- 1613-6829. ; 19:1
-
Journal article (peer-reviewed)abstract
- An efficient and cost-effective approach for the development of advanced catalysts has been regarded as a sustainable way for green energy utilization. The general guideline to design active and efficient catalysts for oxygen evolution reaction (OER) is to achieve high intrinsic activity and the exposure of more density of the interfacial active sites. The heterointerface is one of the most attractive ways that plays a key role in electrochemical water oxidation. Herein, atomically cluster-based heterointerface catalysts with strong metal support interaction (SMSI) between WMn2O4 and TiO2 are designed. In this case, the WMn2O4 nanoflakes are uniformly decorated by TiO2 particles to create electronic effect on WMn2O4 nanoflakes as confirmed by X-ray absorption near edge fine structure. As a result, the engineered heterointerface requires an OER onset overpotential as low as 200 mV versus reversible hydrogen electrode, which is stable for up to 30 h of test. The outstanding performance and long-term durability are due to SMSI, the exposure of interfacial active sites, and accelerated reaction kinetics. To confirm the synergistic interaction between WMn2O4 and TiO2, and the modification of the electronic structure, high-resolution transmission electron microscopy (HR-TEM), X-ray photoemission spectroscopy (XPS), and X-ray absorption spectroscopy (XAS) are used.
|
|
| 2. |
- Liccardo, Letizia, et al.
(author)
-
Surface Defect Engineered Nano-Cu/TiO2 Photocatalysts for Hydrogen Production
- 2024
-
In: Advanced Sustainable Systems. - : John Wiley & Sons. - 2366-7486. ; 8:3
-
Journal article (peer-reviewed)abstract
- Surface defects engineered nano-Cu/TiO2 photocatalysts are synthesized through an easy and cost-effective microwave-assisted hydrothermal synthesis, mixing commercial P25 titania (TiO2) and oxalic acid (Ox), followed by 2.0 wt% Cu co-catalyst (labeled as Cu2.0) loading through in situ photodeposition during reaction. The hydrothermal treatment does not affect the catalyst crystalline structure, morphology, nor the surface area. However, depending on the Ox/TiO2 molar ratio used an influence on the optical properties and on the reactivity of the system is detected. The presence of surface defects leads to intraband states formation between valence band and conduction band of bare titania, inducing an important enhancement in the photoactivity. Thus, Cu2.0/gOx/P25 200 (where g is the weight of Ox and 200 the temperature in Celsius degrees used during the synthesis) have been successfully tested as efficient photocatalysts for hydrogen production through methanol (MeOH) reforming under UV light in a MeOH/ H2O solution (10% v/v) by fluxing the system with N2, showing an increased reactivity compared to the bare Cu2.0/P25 system.
|
|
| 3. |
- Liccardo, Letizia, et al.
(author)
-
Surface Defect Engineering in Colored TiO2 Hollow Spheres Toward Efficient Photocatalysis
- 2023
-
In: Advanced Functional Materials. - : John Wiley & Sons. - 1616-301X .- 1616-3028. ; 33:22
-
Journal article (peer-reviewed)abstract
- Nanostructured TiO2 is one of the best materials for photocatalysis, thanks to its high surface area and surface reactivity, but its large energy bandgap (3.2 eV) hinders the use of the entire solar spectrum. Here, it is proposed that defect-engineered nanostructured TiO2 photocatalysts are obtained by hydrogenation strategy to extend its light absorption up to the near-infrared region. It is demonstrated that hydrogenated or colored TiO2 hollow spheres (THS) composed of hierarchically assembled nanoparticles result in much broader exploitation of the solar spectrum (up to 1200 nm) and the engineered surface enhances the photogeneration of charges for photocatalytic processes. In turn, when applied for photodegradation of a targeted drug (Ciprofloxacin) this results in 82% degradation after 6 h under simulated sunlight. Valence band analysis by photoelectron spectroscopy revealed the presence of oxygen vacancies, whose surface density increases with the hydrogenation rate. Thus, a tight correlation between degree of hydrogenation and photocatalytic activity is directly established. Further insight comes from electron paramagnetic resonance, which evidences bulk Ti3+ centers only in hydrogenated THS. The results are anticipated to disclose a new path toward highly efficient photocatalytic titania in a series of applications targeting water remediation and solar fuel production.
|
|
| 4. |
- Macovez, Roberto, et al.
(author)
-
Metal-to-insulator transition in thin-film polymeric AC(60)
- 2009
-
In: New Journal of Physics. - : IOP Publishing. - 1367-2630. ; 11, s. 023035-
-
Journal article (peer-reviewed)abstract
- We present an electron spectroscopy study of phase-pure AC(60) thin films (A = Rb, Cs) in their monomer (face-centred cubic (fcc)) and polymer phases. A surface electronic reconstruction is observed in polymeric RbC60, analogous to that reported for the fcc phase. As for pristine C-60, the occupied electronic states of AC(60) fullerides are not dramatically affected by polymerization. The energy separation between the leading feature in photoemission and inverse photoemission is similar in both stable AC(60) phases. These observations suggest that electron correlation effects are similar in the two phases, and that their different electronic behaviour is mainly related to the reduction of degeneracy of the polymer frontier states. Photoemission and electron-energy loss spectroscopy data show that the thin-film form of the RbC60 polymer is metallic at room temperature, and that it undergoes a metal-insulator transition at around 100 K. This transition temperature is much higher than that reported for the corresponding bulk phase and signals a poorer screening of Coulomb interactions at the film surface.
|
|
| 5. |
- Pramanik, Arindam, et al.
(author)
-
Dirac states in the noncentrosymmetric superconductor BiPd
- 2021
-
In: Physical Review B. - 2469-9950. ; 103:15
-
Journal article (peer-reviewed)abstract
- Quantum materials having Dirac fermions in conjunction with superconductivity is believed to be the candidate material to realize exotic physics as well as advanced technology. Angle-resolved photoemission spectroscopy (ARPES), a direct probe of the electronic structure, has been extensively used to study these materials. However, experiments often exhibit conflicting results on dimensionality and momentum of the Dirac fermions (e.g., Dirac states in BiPd, a novel noncentrosymmetric superconductor), which is crucial for the determination of the symmetry, time-reversal invariant momenta, and other emerging properties. Employing high-resolution ARPES at varied conditions, we demonstrated a methodology to identify the location of the Dirac node accurately and discover that the deviation from two dimensionality of the Dirac states in BiPd proposed earlier is not a material property. These results helped to reveal the topology of the anisotropy of the Dirac states accurately. We have constructed a model Hamiltonian considering higher-order spin-orbit terms and demonstrate that this model provides an excellent description of the observed anisotropy. Intriguing features of the Dirac states in a noncentrosymmetric superconductor revealed in this study are expected to have significant implications regarding the properties of topological superconductors.
|
|
| 6. |
- Pramanik, Arindam, et al.
(author)
-
Surface states in noncentrosymmetric superconductor BiPd
- 2022
-
In: Journal of Physics: Conference Series. - : IOP Publishing. - 1742-6588 .- 1742-6596. ; 2164
-
Conference paper (peer-reviewed)abstract
- BiPd is a noncentrosymmetric superconductor with Dirac-like surface states on both (010) and (01¯0) faces. The Dirac cone on (010) surface is intense and appears at 0.66 eV binding energy. These states have drawn much attention due to contradictory reports on dimensionality and the momentum of these Dirac fermions. We have studied the properties of these Dirac fermions using varied photon energies and different experimental conditions. The behavior of the Dirac cone is found to be two-dimensional. In addition, we found few more surface states appearing at higher binding energies compared to the Dirac cone.
|
|
| 7. |
- Shifa, Tofik Ahmed, et al.
(author)
-
Interfacing CrOx and CuS for synergistically enhanced water oxidation catalysis
- 2023
-
In: Chemical Engineering Journal. - : Elsevier B.V.. - 1385-8947 .- 1873-3212. ; 453:Part 1
-
Journal article (peer-reviewed)abstract
- The sluggish kinetics associated with the oxygen evolution reaction (OER) limits the sustainability of fuel production and chemical synthesis. Developing catalysts based on Earth abundant elements with a reasonable strategy could solve the challenge. Here, we present a heterostructure built from CrOx and CuS whose interface gives rise to the advent of new functionalities in catalytic activity. Using X-ray photoelectron and absorption spectroscopies, we identified the multiple oxidation states and low coordination number of Cr metal in CrOx-CuS heterostructure. Benefitting from these features, CrOx-CuS generates oxygen gas through water splitting with a low over potential of 190 mV vs RHE at a current density of 10 mA cm−2. The catalyst shows no evident deactivation after a 36-hours operation in alkaline medium. The high catalytic activity, inspired by first principles calculations, and long-time durability make it one of the most effective OER electrocatalysts.
|
|
| 8. |
- Solomon, Getachew, et al.
(author)
-
MoS2 Nanosheets Uniformly Anchored on NiMoO4 Nanorods, a Highly Active Hierarchical Nanostructure Catalyst for Oxygen Evolution Reaction and Pseudo-Capacitors
- 2023
-
In: Advanced sustainable systems. - : John Wiley & Sons. - 2366-7486. ; 7:2
-
Journal article (peer-reviewed)abstract
- Hierarchical nanostructures have attracted considerable research attention due to their applications in the catalysis field. Herein, we design a versatile hierarchical nanostructure composed of NiMoO4 nanorods surrounded by active MoS2 nanosheets on an interconnected nickel foam substrate. The as-prepared nanostructure exhibits excellent oxygen evolution reaction performance, producing a current density of 10 mA cm−2 at an overpotential of 90 mV, in comparison with 220 mV necessary to reach a similar current density for NiMoO4. This behavior originates from the structural/morphological properties of the MoS2 nanosheets, which present numerous surface-active sites and allow good contact with the electrolyte. Besides, the structures can effectively store charges, due to their unique branched network providing accessible active surface area, which facilitates intermediates adsorptions. Particularly, NiMoO4/MoS2 shows a charge capacity of 358 mAhg−1 at a current of 0.5 A g−1 (230 mAhg−1 for NiMoO4), thus suggesting promising applications for charge-storing devices.
|
|
| 9. |
- Solomon, Getachew, et al.
(author)
-
NiMoO4@Co3O4 Core–Shell Nanorods : In Situ Catalyst Reconstruction toward High Efficiency Oxygen Evolution Reaction
- 2021
-
In: Advanced Energy Materials. - : Wiley-VCH Verlagsgesellschaft. - 1614-6832 .- 1614-6840. ; 11:32
-
Journal article (peer-reviewed)abstract
- The sluggish kinetics of the oxygen evolution reaction (OER) is the bottleneck for the practical exploitation of water splitting. Here, the potential of a core–shell structure of hydrous NiMoO4 microrods conformally covered by Co3O4 nanoparticles via atomic layer depositions is demonstrated. In situ Raman and synchrotron-based photoemission spectroscopy analysis confirms the leaching out of Mo facilitates the catalyst reconstruction, and it is one of the centers of active sites responsible for higher catalytic activity. Post OER characterization indicates that the leaching of Mo from the crystal structure, induces the surface of the catalyst to become porous and rougher, hence facilitating the penetration of the electrolyte. The presence of Co3O4 improves the onset potential of the hydrated catalyst due to its higher conductivity, confirmed by the shift in the Fermi level of the heterostructure. In particular NiMoO4@Co3O4 shows a record low overpotential of 120 mV at a current density of 10 mA cm−2, sustaining a remarkable performance operating at a constant current density of 10, 50, and 100 mA cm−2 with negligible decay. Presented outcomes can significantly contribute to the practical use of the water-splitting process, by offering a clear and in-depth understanding of the preparation of a robust and efficient catalyst for water-splitting.
|
|
| 10. |
- Taranova, Anastasiia, et al.
(author)
-
Unraveling the optoelectronic properties of CoSbx intrinsic selective solar absorber towards high-temperature surfaces
- 2023
-
In: Nature Communications. - : Springer Nature. - 2041-1723. ; 14:1
-
Journal article (peer-reviewed)abstract
- The combination of the ability to absorb most of the solar radiation and simultaneously suppress infrared re-radiation allows selective solar absorbers (SSAs) to maximize solar energy to heat conversion, which is critical to several advanced applications. The intrinsic spectral selective materials are rare in nature and only a few demonstrated complete solar absorption. Typically, intrinsic materials exhibit high performances when integrated into complex multilayered solar absorber systems due to their limited spectral selectivity and solar absorption. In this study, we propose CoSbx (2 < x < 3) as a new exceptionally efficient SSA. Here we demonstrate that the low bandgap nature of CoSbx endows broadband solar absorption (0.96) over the solar spectral range and simultaneous low emissivity (0.18) in the mid-infrared region, resulting in a remarkable intrinsic spectral solar selectivity of 5.3. Under 1 sun illumination, the heat concentrates on the surface of the CoSbx thin film, and an impressive temperature of 101.7 °C is reached, demonstrating the highest value among reported intrinsic SSAs. Furthermore, the CoSbx was tested for solar water evaporation achieving an evaporation rate of 1.4 kg m−2 h−1. This study could expand the use of narrow bandgap semiconductors as efficient intrinsic SSAs with high surface temperatures in solar applications.
|
|
