1. |
|
|
2. |
- Billger, Monica, 1961, et al.
(author)
-
Lessons from co-designing a resource-recovery game for collaborative urban sanitation planning
- 2020
-
In: IOP Conference Series: Earth and Environmental Science. - : IOP Publishing. - 1755-1307 .- 1755-1315. ; 588:4
-
Conference paper (peer-reviewed)abstract
- The aim of this study is to describe the development of an innovative planning tool to promote the knowledge and collaboration needed to overcome challenges in the sanitation sector. A serious game was designed to share knowledge about resource recovery and support attitude-change and collaboration between stakeholders. This study documents the co-design process of game development from conception based on a set of specifications the game should achieve, through iterative testing with relevant stakeholders as players. The resulting prototype of the game showed that it was not possible to include all the original desired specifications in the final game. Stakeholders found that the game was engaging, stimulated creativity and achieved its goal.
|
|
3. |
- Gold, Moritz, et al.
(author)
-
Faecal sludge as a solid industrial fuel : a pilot-scale study
- 2017
-
In: Journal of Water, Sanitation and Hygiene for Development. - : IWA Publishing. - 2043-9083 .- 2408-9362. ; 7:2, s. 243-251
-
Journal article (peer-reviewed)abstract
- Revenues from faecal sludge (FS) treatment end products could offset treatment costs and contribute to financially viable sanitation. In urban sub-Saharan Africa, energy-producing resource recovery has the potential to generate greater revenue than use as soil conditioner. In contrast with wastewater sludge, the technical feasibility of using dried FS as solid fuel in industries has not been investigated. This study evaluated it through characterization of dried FS from drying beds and by assessing the combustion performance in two pilot-scale kilns, in Kampala and Dakar. Results from the fuel characterization demonstrate that dried FS had comparable fuel characteristics as wastewater sludge considering calorific value and ash content. The calorific values and ash contents were 10.9â13.4 MJ/kg dry matter (DM) and 47.0â58.7%, respectively. Results from pilot-scale experiments suggest that dried FS can be effective in providing energy for industries. Temperatures in pilot-scale kilns fueled by FS were 800 °C, sufficient for curing of clay bricks, and 437 °C, sufficient for waste oil regeneration. In Kampala and Dakar, an estimated 20,000 tons of FS DM per year accumulate. Tapping the industrial fuel market and financial benefits could be realized through optimization of onsite sanitation and treatment technologies.
|
|
4. |
- Kinobe, Joel, et al.
(author)
-
Mapping out the solid waste generation and collection models: The case of Kampala City
- 2015
-
In: Journal of the Air and Waste Management Association. - : Informa UK Limited. - 1096-2247 .- 2162-2906. ; 65, s. 197-205
-
Journal article (peer-reviewed)abstract
- This paper presents a mapping of the waste collection systems in Kampala city, using geographical information system (GIS) ArcGIS mapping software. It discusses the existing models of waste collection to the final disposal destinations. It was found that food and yard wastes constitute 92.7% of the waste generated in Kampala. Recyclables and other special wastes constitute only 7.3% of the total waste, mainly because of the increased level of reuse and recycling activities. The generation rate of solid wastes was on average, 582, 169, 105, and 90 tons/day from poor areas, upscale wealthier areas, business centers, and market areas respectively. This tonnage of waste was collected, transported, and disposed of at the city landfill. The study found that in total, residential areas of poor people generate more waste than other categories stated earlier, mainly because of their large populations. In total, there were 133 unofficial temporary storage sites acknowledged by Kampala Capital City Authority (KCCA) but not formally designated, 59 illegal dump sites, and 35 officially recognized temporary waste storage locations. This paper presents large-scale data that can help with understanding the collection models and their influence on solid waste management in Kampala city, which could be used for similar cities in developing countries.
|
|
5. |
- Kinobe, Joel, et al.
(author)
-
Optimization of waste collection and disposal in Kampala city
- 2015
-
In: Habitat International. - : Elsevier BV. - 0197-3975. ; 49, s. 126-137
-
Journal article (peer-reviewed)abstract
- Waste collection and transportation is an important municipal service that involves high expenditures if not handled efficiently. This has hindered waste management in many Sub-Saharan African countries. In this study, Geographic Information System (GIS) tools were used to optimize travel distances, trips and collection time, which leads to maximizing total waste collection, yielding large savings and keeping the environment clean. The study suggested the best waste collection routes, and determined a suitable vehicle fleet and capacity to be used by Kampala Capital City Authority (KCCA), which is the body responsible for waste management in Kampala. The use of the GIS tools led to the reduction in the total number of trips and travel distances, which decreased fuel consumption and vehicle emissions. In addition, the model can be used by the various outsourced private operators, collecting and disposing of solid wastes. Since the current municipal landfill for Kampala city is almost full, the GIS tool was used to identify the optimum location of a new proposed landfill site, based on optimized travel distances. The results of this study can help KCCA to decrease costs of managing wastes and environmental as well as social impacts. (C) 2015 Elsevier Ltd. All rights reserved.
|
|
6. |
- Kinobe, Joel, et al.
(author)
-
Reverse logistics system and recycling potential at a landfill: A case study from Kampala City
- 2015
-
In: Waste Management. - : Elsevier BV. - 0956-053X .- 1879-2456. ; 42, s. 82-92
-
Journal article (peer-reviewed)abstract
- The rapid growing population and high urbanisation rates in Sub-Saharan Africa has caused enormous pressure on collection services of the generated waste in the urban areas. This has put a burden on landfilling, which is the major waste disposal method. Waste reduction, re-use and recycling opportunities exist but are not fully utilized. The common items that are re-used and re-cycled are plastics, paper, aluminum, glass, steel, cardboard, and yard waste. This paper develops an overview of reverse logistics at Kiteezi landfill, the only officially recognised waste disposal facility for Kampala City. The paper analyses, in details the collection, re-processing, re-distribution and final markets of these products into a reversed supply chain network. Only 14% of the products at Kiteezi landfill are channeled into the reverse chain while 63% could be included in the distribution chain but are left out and disposed of while the remaining 23% is buried. This is because of the low processing power available, lack of market value, lack of knowledge and limited value addition activities to the products. This paper proposes possible strategies of efficient and effective reverse logistics development, applicable to Kampala City and other similar cities. (C) 2015 Elsevier Ltd. All rights reserved.
|
|
7. |
- Mcconville, Jennifer, et al.
(author)
-
Guide to Sanitation Resource-Recovery Products & Technologies : a supplement to the Compendium of Sanitation Systems and Technologies
- 2020
-
Reports (pop. science, debate, etc.)abstract
- The world is currently undergoing a paradigm shift towards a circular society in which resources are recovered and reused rather than discarded. The global population has surpassed seven billion people, and rapid urbanisation in many areas is putting a significant strain on our ability to provide basic services to all. The Sustainable Development Goals highlight the fact that millions still lack access to food, healthcare, water and sanitation. At the same time, it is increasingly evident that we are consuming the Earth’s resources and releasing waste into the environment in an unsustainable manner. The resulting effects on climate change, biodiversity loss and changing nutrient cycles threaten to over-step critical planetary boundaries. Crossing these boundaries has the potential to cause irreversible environmental change and to threaten the ability of humanity to develop and thrive. Sanitation systems manage carbon, nutrient and water flows, which are key resource flows that affect the planetary boundaries and thus should be recovered and recirculated instead of being released into the environment. Increasing resource recovery within our sanitation systems can play a critical role in shifting to a more sustainable society.There are significant resources within excreta and wastewater fractions that can be recovered and turned into useful products. For example, the average person excretes 4.5 kg of nitrogen, 0.5 kg of phosphorus and 1.2 kg of potassium every year. These elements and other micronutrients found in excreta are critical for the fertilising and restoration of agricultural soils. The energy value of faeces is on average 4 115 kcal/kg of dry solids. This energy can be utilised as a renewable energy source. On top of this, there are large volumes of wastewater that can be captured, cleaned and reused. However, human excreta and wastewater contain pathogens and other undesired substances, risks that need to be managed in a reuse system. The growing demand for recycling needs to be complemented with a growing knowledge of how to do it safely.The aim of this document is to provide an overview of the possibilities for resource recovery from sanitation and provide guidance on treatment processes to achieve safe products for reuse. The focus of this document is on resource recovery from the organic wastes managed in sanitation systems and, to a lesser extent, on the recovery of water and energy generation. Resource recovery sanitation systems are defined as systems that safely recycle excreta and organic waste while minimising the use of non-renewable resources such as water and chemicals. Safe recycling means that waste flows are managed so that physical, microbial and chemical risks are minimised. Thus, the recycled product should not pose any significant health threat or environmental impact when correctly used.The specific objectives of this document are:1. To expose the user to a broad range of recovered sanitation products and innovative treatment technologies.2. To help the user to design functional solutions for resource recovery by illustrating the linkages between sanitation inputs, treatment technology and the recoverable products.3. To provide an overview of basic information regarding design aspects, operational requirements and health, safety and social considerations related to resource recovery technologies and products.4. Describe and fairly present technology-specific advantages and disadvantages.
|
|
8. |
- Mcconville, Jennifer, et al.
(author)
-
Structured Approach for Comparison of Treatment Options for Nutrient-Recovery From Fecal Sludge
- 2020
-
In: Frontiers in Environmental Science. - : Frontiers Media S.A.. - 2296-665X. ; 8
-
Journal article (peer-reviewed)abstract
- The aim of this study is to present a structured approach for comparing possible nutrient-recovery fecal sludge (FS) treatment systems in order to support transparent decision-making. The approach uses a multi-dimensional sustainability assessment of treatment technologies for nutrient recovery from FS, using a typical case of Kampala City, Uganda. A synthesized list of 22 treatment technologies was prepared from literature. This list included wastewater treatment technologies, which could be adapted to treat fecal sludge, and established fecal sludge treatment technologies that are available or potentially applicable in Kampala. Based on the local situation, the list was reduced to eight possible options, which were carried forward into a multi-dimensional sustainability assessment that incorporated input of stakeholders. The technologies included in the final assessment were optimization of the existing system, lactic acid fermentation (LAF), composting, vermicomposting, Black-Soldier Fly (BSF) composting, ammonia treatment, alkaline stabilization and solar drying. Optimization of the existing system performed well against the set criteria and is a recommended short-term solution. This will require e.g., adding narrower screens to remove more trash from the incoming sludge and respecting storage times prior to selling the sludge. To maximize the agricultural value of the recovered product, while respecting the need for safe reuse, a combination of technologies becomes relevant; the use of a combination of BSF, and subsequent ammonia or alkaline treatment of the remaining organic fraction would allow for maximized safe nutrient recovery and can be the aim for long-term sanitation planning in Kampala. The results of this process provide supporting information for a discussion of trade-offs between stakeholder groups as part of a decision-making process within a larger planning context.
|
|
9. |
|
|
10. |
|
|