1. |
- Boffano, P., et al.
(author)
-
The epidemiology and management of ameloblastomas: A European multicenter study
- 2021
-
In: Journal of Cranio-Maxillofacial Surgery. - : Elsevier BV. - 1010-5182. ; 49:12, s. 1107-1112
-
Journal article (peer-reviewed)abstract
- The present study aimed at assessing the epidemiology including demographic variables, diagnostic features, and management of ameloblastomas at several European departments of maxillofacial and oral surgery. The following data were recorded for each patient: gender, age, voluptuary habits, comorbidities, site, size, radiographic features, type, histopathological features, kind of treatment, length of hospital stay, complications, recurrence, management and complications of the recurrence. A total of 244 patients, 134 males and 110 females with ameloblastomas were included in the study. Mean age was 47.4 years. In all, 81% of lesions were found in the mandible, whereas 19% were found in the maxilla. Mean size of included ameloblastomas was 38.9 mm. The most frequently performed treatment option was enucleation plus curettage/peripheral ostectomy in 94 ameloblastomas, followed by segmental resection (60 patients), simple enucleation (46 patients), and marginal resection (40 pa-tients). A recurrence (with a mean follow up of 5 years) was observed in 47 cases out of 244 ameloblastomas (19.3%). Segmental resection was associated with a low risk of recurrence (p = 0003), whereas enucleation plus curettage/peripheral ostectomy was associated with a high risk of recurrence (p = 0002). A multilocular radiographic appearance was associated with a high risk of recurrence (p < .05), as well as the benign solid/multicystic histologic type (p < .05). Within the limitations of the study it seems that the management of ameloblastomas will probably remain controversial even in the future. Balancing low surgical morbidity with a low recurrence rate is a difficult aim to reach. (c) 2021 European Association for Cranio-Maxillo-Facial Surgery. Published by Elsevier Ltd. All rights reserved.
|
|
2. |
- Mazzuca, Silvia, et al.
(author)
-
Establishing research strategies, methodologies and technologies to link genomics and proteomics to seagrass productivity, community metabolism, and ecosystem carbon fluxes
- 2013
-
In: Frontiers in Plant Science. - : Frontiers Media SA. - 1664-462X. ; 4
-
Journal article (peer-reviewed)abstract
- A complete understanding of the mechanistic basis of marine ecosystem functioning is only possible through integrative and interdisciplinary research. This enables the prediction of change and possibly the mitigation of the consequences of anthropogenic impacts. One major aim of the European Cooperation in Science and Technology (COST) Action ES0609 Seagrasses productivity. From genes to ecosystem management, is the calibration and synthesis of various methods and the development of innovative techniques and protocols for studying seagrass ecosystems. During 10 days, 20 researchers representing a range of disciplines (molecular biology, physiology, botany, ecology, oceanography, and underwater acoustics) gathered at The Station de Recherches Sous-marines et Oceanographiques (STARESO, Corsica) to study together the nearby Posidonia oceanica meadow. STARESO is located in an oligotrophic area classified as pristine site where environmental disturbances caused by anthropogenic pressure are exceptionally low. The healthy P. oceanica meadow, which grows in front of the research station, colonizes the sea bottom from the surface to 37 m depth. During the study, genomic and proteomic approaches were integrated with ecophysiological and physical approaches with the aim of understanding changes in seagrass productivity and metabolism at different depths and along daily cycles. In this paper we report details on the approaches utilized and we forecast the potential of the data that will come from this synergistic approach not only for P. oceanica but for seagrasses in general.
|
|
3. |
|
|
4. |
- Wrobel, L., et al.
(author)
-
Compounds activating VCP D1 ATPase enhance both autophagic and proteasomal neurotoxic protein clearance
- 2022
-
In: Nature Communications. - : Springer Science and Business Media LLC. - 2041-1723. ; 13:1
-
Journal article (peer-reviewed)abstract
- Enhancing the removal of aggregate-prone toxic proteins is a rational therapeutic strategy for a number of neurodegenerative diseases, especially Huntington's disease and various spinocerebellar ataxias. Ideally, such approaches should preferentially clear the mutant/misfolded species, while having minimal impact on the stability of wild-type/normally-folded proteins. Furthermore, activation of both ubiquitin-proteasome and autophagy-lysosome routes may be advantageous, as this would allow effective clearance of both monomeric and oligomeric species, the latter which are inaccessible to the proteasome. Here we find that compounds that activate the D1 ATPase activity of VCP/p97 fulfill these requirements. Such effects are seen with small molecule VCP activators like SMER28, which activate autophagosome biogenesis by enhancing interactions of PI3K complex components to increase PI(3)P production, and also accelerate VCP-dependent proteasomal clearance of such substrates. Thus, this mode of VCP activation may be a very attractive target for many neurodegenerative diseases. Several neurodegenerative diseases are characterized by the aggregation of cytoplasmic proteins. Here, the authors demonstrate that the small molecule SMER28 activates VCP, which enhances both autophagic and proteasomal clearance of aggregate-prone proteins.
|
|
5. |
- Ehrenfest, D. M. D., et al.
(author)
-
In Search of a Consensus Terminology in the Field of Platelet Concentrates for Surgical Use: Platelet-Rich Plasma (PRP), Platelet-Rich Fibrin (PRF), Fibrin Gel Polymerization and Leukocytes
- 2012
-
In: Current Pharmaceutical Biotechnology. - 1389-2010. ; 13:7, s. 1131-1137
-
Journal article (peer-reviewed)abstract
- In the field of platelet concentrates for surgical use, most products are termed Platelet-Rich Plasma (PRP). Unfortunately, this term is very general and incomplete, leading to many confusions in the scientific database. In this article, a panel of experts discusses this issue and proposes an accurate and simple terminology system for platelet concentrates for surgical use. Four main categories of products can be easily defined, depending on their leukocyte content and fibrin architecture: Pure Platelet-Rich Plasma (P-PRP), such as cell separator PRP, Vivostat PRF or Anitua's PRGF; Leukocyte- and Platelet-Rich Plasma (L-PRP), such as Curasan, Regen, Plateltex, SmartPReP, PCCS, Magellan, Angel or GPS PRP; Pure Plaletet-Rich Fibrin (P-PRF), such as Fibrinet; and Leukocyte-and Platelet-Rich Fibrin (L-PRF), such as Choukroun's PRF. P-PRP and L-PRP refer to the unactivated liquid form of these products, their activated versions being respectively named P-PRP gels and L-PRP gels. The purpose of this search for a terminology consensus is to plead for a more serious characterization of these products. Researchers have to be aware of the complex nature of these living biomaterials, in order to avoid misunderstandings and erroneous conclusions. Understanding the biomaterials or believing in the magic of growth factors ? From this choice depends the future of the field.
|
|
6. |
- Faria, Paulo E P, et al.
(author)
-
Effects of early functional loading on maintenance of free autogenous bone graft and implant osseointegration: an experimental study in dogs.
- 2010
-
In: Journal of oral and maxillofacial surgery : official journal of the American Association of Oral and Maxillofacial Surgeons. - : Elsevier BV. - 1531-5053. ; 68:4, s. 825-32
-
Journal article (peer-reviewed)abstract
- PURPOSE: The aim of the present study was to investigate the healing, integration, and maintenance of autogenous onlay bone grafts and implant osseointegration either loaded in the early or the delayed stages. MATERIALS AND METHODS: A total of 5 male dogs received bilateral blocks of onlay bone grafts harvested from the contralateral alveolar ridge of the mandible. On one side, the bone block was secured by 3 dental implants (3.5 mm x 13.0 mm, Osseospeed; AstraTech AB, Mölndal, Sweden). Two implants at the extremities of the graft were loaded 2 days after installation by abutment connection and prosthesis (simultaneous implant placement group); the implant in the middle remained unloaded and served as the control. On the other side, the block was fixed with 2 fixation screws inserted in the extremities of the graft. Four weeks later, the fixation screws were replaced with 3 dental implants. The loading procedure (delayed implant placement group) was performed 2 days later, as described for the simultaneous implant placement sites. The animals were sacrificed 12 weeks after the grafting procedure. Implant stability was measured through resonance frequency analysis. The bone volume and density were assessed on computed tomography. The bone to implant contact and bone area in a region of interest were evaluated on histologic slides. RESULTS: The implant stability quotient showed statistical significance in favor of the delayed loaded grafts (P = .001). The bone-to-implant contact (P = .008) and bone area in a region of interest (P = 0.005) were significantly greater in the delayed group. Nevertheless, no difference was found in terms of graft volume and density between the early loaded and delayed-loaded approaches. CONCLUSIONS: The protocol in which the implant and bone graft were given delayed loading allows for effective quality of implant osseointegration and stabilization, with healing and remodeling occurring in areas near the implant resulting in denser bone architecture.
|
|
7. |
- Foti, M., et al.
(author)
-
P56Lck anchors CD4 to distinct microdomains on microvilli
- 2002
-
In: Proceedings of the National Academy of Sciences of the United States of America. - : Proceedings of the National Academy of Sciences. - 0027-8424 .- 1091-6490. ; 99:4, s. 2008-2013
-
Journal article (peer-reviewed)abstract
- Cell-surface microvilli play a central role in adhesion, fusion, and signaling processes. Some adhesion and signaling receptors segregate on microvilli but the determinants of this localization remain mostly unknown. In this study, we considered CD4, a receptor involved in immune response and HIV infection, and p56Lck, a CD4-associated tyrosine kinase. Analysis of CD4 trafficking reveals that p56Lck binds tightly to CD4 independently of its activation state and inhibits CD4 internalization. Electron microscopy analysis established that p56Lck mediates CD4 association with microvilli whereas biochemical data indicate that p56Lck expression renders CD4 insoluble by the nonionic detergent Triton X-100. In addition, cytoskeleton-disrupting agent increased CD4 solubility, suggesting the involvement of cytoskeletal elements in CD4 anchoring to microvilli. This concept was supported further by the observation that the lateral mobility of CD4 within the plasma membrane was decreased in cells expressing p56Lck. Finally, isolation of detergent-resistant membranes revealed that the complex CD4-p56Lck is enriched within these domains as opposed to conditions in which CD4 does not interact with p56Lck. In conclusion, our results show that p56Lck targets CD4 to specialized lipid microdomains preferentially localized on microvilli. This localization, which prevents CD4 internalization, might facilitate CD4-mediated adhesion processes and could correspond to the signaling site of the receptor.
|
|
8. |
- MALCUS JOHNSSON, PIA, et al.
(author)
-
Differences in body structure and function between patients with systemic lupus erythematosus and healthy individuals, with particular reference to joint hypermobility
- 2017
-
In: Scandinavian Journal of Rheumatology. - : Informa UK Limited. - 0300-9742 .- 1502-7732. ; 46:1, s. 40-43
-
Journal article (peer-reviewed)abstract
- Objectives: To explore differences in body structure and function in systemic lupus erythematosus (SLE) patients and controls, with particular reference to joint hypermobility, and to evaluate the usefulness of the Brighton criteria for diagnosing joint hypermobility syndrome (JHS) in SLE. Method: Female SLE patients were, according to age group, consecutively invited to participate in the study. Controls were healthy females matched for age. All individuals were examined by a physician according to the Brighton criteria, and by an occupational therapist and a physiotherapist to obtain the Beighton scores, overall joint mobility, and manifestations in body structure and function. Results: Sixteen (23%) SLE patients and 19 (27%) controls had a Beighton score ≥ 4 (non-significant, ns), and 39 (55%) individuals in the SLE group and 22 (31%) in the control group satisfied the Brighton criteria for JHS (p
|
|
9. |
- Merheb, J., et al.
(author)
-
Influence of Skeletal and Local Bone Density on Dental Implant Stability in Patients with Osteoporosis
- 2016
-
In: Clinical Implant Dentistry and Related Research. - : Wiley. - 1523-0899 .- 1708-8208. ; 18:2, s. 253-260
-
Journal article (peer-reviewed)abstract
- Background and PurposeOsteoporosis is a major skeletal disease affecting millions of people worldwide. Recent studies claim that patients with osteoporosis do not have a higher risk of early implant failure compared to non-osteoporotic patients. The aim of this study was to assess the effect of skeletal osteoporosis and local bone density on initial dental implant stability. Materials and MethodsSeventy-three patients were recruited and were assigned (based on a Dual-energy X-ray Absorptiometry scan) to either the osteoporosis (Opr), osteopenia (Opn), or control (C) group. Forty nine of the 73 patients received dental implants and had implant stability measured by means of resonance frequency analysis (RFA) at implant placement and at prosthetic abutment placement. On the computerized tomography scans, the cortical thickness and the bone density (Hounsfield Units) at the sites of implant placement were measured. ResultsAt implant placement, primary stability was on average lower in group Opr (63.310.3 ISQ) than in group Opn (65.3 +/- 7.5 implant stability qutient (ISQ)), and group C (66.7 +/- 8.7 ISQ). At abutment placement, a similar trend was observed: group Opr (66.4 +/- 9.5 ISQ) scored lower than group Opn (70.7 +/- 7.8 ISQ), while the highest average was for group C (72.2 +/- 7.2 ISQ). The difference between groups Opr and C was significant. Implant length and diameter did not have a significant effect on implant stability as measured with RFA. A significant correlation was found between local bone density and implant stability for all regions of interest. ConclusionsImplant stability seems to be influenced by both local and skeletal bone densities. The lower stability scores in patient with skeletal osteoporosis reinforce the recommendations that safe protocols and longer healing times could be recommended when treating those patients with dental implants.
|
|
10. |
- Merheb, J., et al.
(author)
-
Relation between Spongy Bone Density in the Maxilla and Skeletal Bone Density
- 2015
-
In: Clinical Implant Dentistry and Related Research. - : Wiley. - 1523-0899 .- 1708-8208. ; 17:6, s. 1180-1187
-
Journal article (peer-reviewed)abstract
- © 2015 Wiley Periodicals, Inc. Background and Purpose: Osteoporosis is a disease affecting more than 300 million people worldwide and is responsible for numerous medical complications. This study aimed to investigate the relation between skeletal and maxillary bone density. Materials and Methods: Seventy-three patients were recruited and divided between group A (osteoporosis), group B (healthy, control), and group C (osteopenia) on the basis of a dual-energy x-ray absorptiomery (DXA) scan. These patients also received a CT scan on which bone density measurements were performed at five sites: maxilla midline, retromolar tuberosities, incisor, premolars, and molar regions. Results: The bone density was lower in osteoporotic patients compared with the control patients. The bone mineral density (BMD) of the tuberosities showed the strongest correlations with the BMD of the hip and the spine (respectively, r=0.50 and r=0.61). The midline region showed moderate correlations with the hip (r=0.47) and the spine (r=0.46). For potential implant sites, the correlations with the BMD of the hip and spine were, however, small to insignificant. Based on measurements of bone density of the maxilla, it was possible to predict if the patient was osteoporotic or not with a sensitivity of 65% and a specificity of 83%. Conclusions: The maxillary bone density of subjects with osteoporosis is significantly lower than that of healthy patients. Moreover, there is a direct correlation between the density of the skeleton and the density of some sites of the maxilla. Using measurements of maxillary bone density in order to predict skeletal bone density might be a useful tool for the screening of osteoporosis.
|
|