1. |
- Clementini, G., et al.
(författare)
-
Testing parallaxes with local Cepheids and RR Lyrae stars
- 2017
-
Ingår i: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 605
-
Tidskriftsartikel (refereegranskat)abstract
- Context. Parallaxes for 331 classical Cepheids, 31 Type II Cepheids, and 364 RR Lyrae stars in common between Gaia and the HIPPARCOS and Tycho-2 catalogues are published in Gaia Data Release 1 (DR1) as part of the Tycho-Gaia Astrometric Solution (TGAS). Aims. In order to test these first parallax measurements of the primary standard candles of the cosmological distance ladder, which involve astrometry collected by Gaia during the initial 14 months of science operation, we compared them with literature estimates and derived new period-luminosity (PL), period-Wesenheit (PW) relations for classical and Type II Cepheids and infrared PL, PL-metallicity (PLZ), and optical luminosity-metallicity (MV-[Fe/H]) relations for the RR Lyrae stars, with zero points based on TGAS.Methods. Classical Cepheids were carefully selected in order to discard known or suspected binary systems. The final sample comprises 102 fundamental mode pulsators with periods ranging from 1.68 to 51.66 days (of which 33 with sigma(omega)/omega < 0 : 5). The Type II Cepheids include a total of 26 W Virginis and BL Herculis stars spanning the period range from 1.16 to 30.00 days (of which only 7 with sigma(omega)/omega 0 : 5). The RR Lyrae stars include 200 sources with pulsation period ranging from 0.27 to 0.80 days (of which 112 with sigma(omega)/omega < 0 : 5). The new relations were computed using multi- band (V; I; J; K-s) photometry and spectroscopic metal abundances available in the literature, and by applying three alternative approaches: (i) linear least-squares fitting of the absolute magnitudes inferred from direct transformation of the TGAS parallaxes; (ii) adopting astrometry-based luminosities; and (iii) using a Bayesian fitting approach. The last two methods work in parallax space where parallaxes are used directly, thus maintaining symmetrical errors and allowing negative parallaxes to be used. The TGAS-based PL; PW; PLZ, and MV [Fe/H] relations are discussed by comparing the distance to the Large Magellanic Cloud provided by different types of pulsating stars and alternative fitting methods.Results. Good agreement is found from direct comparison of the parallaxes of RR Lyrae stars for which both TGAS and HST measurements are available. Similarly, very good agreement is found between the TGAS values and the parallaxes inferred from the absolute magnitudes of Cepheids and RR Lyrae stars analysed with the Baade-Wesselink method. TGAS values also compare favourably with the parallaxes inferred by theoretical model fitting of the multi-band light curves for two of the three classical Cepheids and one RR Lyrae star, which were analysed with this technique in our samples. The K-band PL relations show the significant improvement of the TGAS parallaxes for Cepheids and RR Lyrae stars with respect to the HIPPARCOS measurements. This is particularly true for the RR Lyrae stars for which improvement in quality and statistics is impressive.Conclusions. TGAS parallaxes bring a significant added value to the previous HIPPARCOS estimates. The relations presented in this paper represent the first Gaia-calibrated relations and form a work-in-progress milestone report in the wait for Gaia-only parallaxes of which a first solution will become available with Gaia Data Release 2 (DR2) in 2018.
|
|
2. |
- van Leeuwen, F., et al.
(författare)
-
Gaia Data Release 1 : Open cluster astrometry: Performance, limitations, and future prospects
- 2017
-
Ingår i: Astronomy and Astrophysics. - : EDP Sciences. - 0004-6361 .- 1432-0746. ; 601
-
Tidskriftsartikel (refereegranskat)abstract
- Context. The first Gaia Data Release contains the Tycho-Gaia Astrometric Solution (TGAS). This is a subset of about 2 million stars for which, besides the position and photometry, the proper motion and parallax are calculated using Hipparcos and Tycho-2 positions in 1991.25 as prior information. Aims. We investigate the scientific potential and limitations of the TGAS component by means of the astrometric data for open clusters. Methods. Mean cluster parallax and proper motion values are derived taking into account the error correlations within the astrometric solutions for individual stars, an estimate of the internal velocity dispersion in the cluster, and, where relevant, the effects of the depth of the cluster along the line of sight. Internal consistency of the TGAS data is assessed. Results. Values given for standard uncertainties are still inaccurate and may lead to unrealistic unit-weight standard deviations of least squares solutions for cluster parameters. Reconstructed mean cluster parallax and proper motion values are generally in very good agreement with earlier Hipparcos-based determination, although the Gaia mean parallax for the Pleiades is a significant exception. We have no current explanation for that discrepancy. Most clusters are observed to extend to nearly 15 pc from the cluster centre, and it will be up to future Gaia releases to establish whether those potential cluster-member stars are still dynamically bound to the clusters. Conclusions. The Gaia DR1 provides the means to examine open clusters far beyond their more easily visible cores, and can provide membership assessments based on proper motions and parallaxes. A combined HR diagram shows the same features as observed before using the Hipparcos data, with clearly increased luminosities for older A and F dwarfs.
|
|
3. |
- Li, Qi, 1990, et al.
(författare)
-
Finger Number and Device Performance: A Case Study of Reduced Graphene Oxide Microsupercapacitors
- 2021
-
Ingår i: Physica Status Solidi (B): Basic Research. - : Wiley. - 1521-3951 .- 0370-1972. ; 258:2
-
Tidskriftsartikel (refereegranskat)abstract
- Microsupercapacitors (MSCs) are recognized as suitable energy storage devices for the internet of things (IoTs) applications. Herein is described the work conducted to assess the areal energy and power densities of MSCs with 2, 10, 20, and 40 interdigital finger electrodes on a fixed device footprint area (the finger interspacing is fixed at 40 μm, and the finger width and length are allowed to vary to fit the footprint area). The MSCs are based on reduced graphene oxide (rGO) materials and fabricated with a spin-coating and etch method. The performance evaluation indicates a strong dependency of areal capacitance and energy density on the number of fingers, and the maximum (impedance match) power density is also influenced to a relatively large extent, whereas the average power density is not sensitive to the configuration parameters in the present evaluation settings (scan rate 20–200 mV s−1 and current density of 100 μA cm−2). For the rGO-based devices, the equivalent distributed resistance may play an important role in determining the device resistance and power-related performance.
|
|
4. |
- Smith, Anderson David, 1985, et al.
(författare)
-
Toward CMOS compatible wafer-scale fabrication of carbon-based microsupercapacitors for IoT
- 2018
-
Ingår i: Journal of Physics: Conference Series. - : IOP Publishing. - 1742-6588 .- 1742-6596. ; 1052:1
-
Konferensbidrag (refereegranskat)abstract
- This work presents a wafer-scale method of microsupercapacitor (MSC) fabrication. Deposition of the electrode precursor, i.e. graphene oxide, is accomplished through spin-coating which allows for potential application in CMOS compatible processes for future integrated on-chip energy storage systems. Our MSCs have an areal capacitance of 0.4 mF/cm2at 10 μA, which is a very promising result. Further, the MSC has good rate capability as its capacitance decreases by only 0.03 mF/cm2when the current increases to 50 μA. The MSCs have a maximum energy density of 0.04 μWh/cm2and a maximum power density as high as 96 μW/cm2. Additionally, the wafer-scale process demonstrates industrial viability.
|
|
5. |
- Vyas, Agin, 1992, et al.
(författare)
-
Enhanced Electrode Deposition for On-Chip Integrated Micro-Supercapacitors by Controlled Surface Roughening
- 2020
-
Ingår i: ACS Omega. - : American Chemical Society (ACS). - 2470-1343. ; 5:10, s. 5219-5228
-
Tidskriftsartikel (refereegranskat)abstract
- On-chip micro-supercapacitors (MSCs), integrated with energy harvesters, hold substantial promise for developing self-powered wireless sensor systems. However, MSCs have conventionally been manufactured through techniques incompatible with semiconductor fabrication technology, the most significant bottleneck being the electrode deposition technique. Utilization of spin-coating for electrode deposition has shown potential to deliver several complementary metal-oxide-semiconductor (CMOS)-compatible MSCs on a silicon substrate. Yet, their limited electrochemical performance and yield over the substrate have remained challenges obstructing their subsequent integration. We report a facile surface roughening technique for improving the wafer yield and the electrochemical performance of CMOS-compatible MSCs, specifically for reduced graphene oxide as an electrode material. A 4 nm iron layer is deposited and annealed on the wafer substrate to increase the roughness of the surface. In comparison to standard nonroughened MSCs, the increase in surface roughness leads to a 78% increased electrode thickness, 21% improvement in mass retention, 57% improvement in the uniformity of the spin-coated electrodes, and a high yield of 87% working devices on a 2″ silicon substrate. Furthermore, these improvements directly translate to higher capacitive performance with enhanced rate capability, energy, and power density. This technique brings us one step closer to fully integrable CMOS-compatible MSCs in self-powered systems for on-chip wireless sensor electronics. ©
|
|
6. |
- Vyas, Agin, 1992, et al.
(författare)
-
Surface Roughening with Iron Nanoparticles for Promoted Adhesion of Spin Coated Microsupercapacitor Electrodes
- 2019
-
Ingår i: MRS Advances. - : Springer Science and Business Media LLC. - 2059-8521. ; 4:23, s. 1335-1340
-
Konferensbidrag (refereegranskat)abstract
- Microsupercapacitors (MSCs) are miniaturized energy storage devices that can be integrated in an on-chip platform as a component of a power supply for Internet of things' sensors. Integration of these on-chip MSCs require them to be fabricated through CMOS compatible fabrication techniques such as spin coating. One of the biggest challenges in spin coated MSCs is the poor surface adhesion. In this work, we present a CMOS compatible electrode deposition process with enhanced adhesion and retention for reduced graphene oxide (rGO) using spin coating. In order to improve the adhesion and surface uniformity of the deposited electrode material, the surface of Si/SiO 2 wafers was subjected to roughening through Fe nanoparticle formation. A 4 nm thick Fe layer deposition substantially magnified the average mean surface roughness of the substrates. In comparison with substrates without the Fe deposition, the treated ones have more than 300% improvement in surface coverage and rGO mass retention after sonication testing. These results suggest that the surface roughening has a positive influence on electrode deposition via a spin-coating method.
|
|
7. |
|
|
8. |
- Hansson, Josef, 1991, et al.
(författare)
-
Bipolar electrochemical capacitors using double-sided carbon nanotubes on graphite electrodes
- 2020
-
Ingår i: Journal of Power Sources. - : Elsevier BV. - 0378-7753. ; 451
-
Tidskriftsartikel (refereegranskat)abstract
- The electrochemical capacitor (EC) is a key enabler for the miniaturized self-powered systems expected to become ubiquitous with the advent of the internet-of-things (IoT). Vertically aligned carbon nanotubes (VACNTs) on graphite holds promise as electrodes for compact and low-loss ECs. However, as with all ECs, the operating voltage is low, and miniaturization of higher voltage devices necessitates a bipolar design. In this paper, we demonstrate a bipolar EC using graphite/VACNTs electrodes fabricated using a joule heating chemical vapor deposition (CVD) setup. The constructed EC contains one layer of double-sided VACNTs on graphite as bipolar electrode. Compared to a series connection of two individual devices, the bipolar EC has 22% boost in volumetric energy density. More significant boost is envisaged for stacking more bipolar electrode layers. The energy enhancement is achieved without aggravating self-discharge (71.2% retention after 1 h), and at no sacrifice of cycling stability (96.7% over 50000 cycles) owing to uniform growth of VACNTs and thus eliminating cell imbalance problems.
|
|
9. |
- Haque, Mohammad Mazharul, 1984, et al.
(författare)
-
Identification of self-discharge mechanisms of ionic liquid electrolyte based supercapacitor under high-temperature operation
- 2021
-
Ingår i: Journal of Power Sources. - : Elsevier BV. - 0378-7753. ; 485
-
Tidskriftsartikel (refereegranskat)abstract
- Ionic liquids (ILs) are promising electrolytes for supercapacitors (SCs) aimed for high-temperature applications, where increased ionic conductivity results in superior capacitive performance compared to room temperature (RT) performance. However, an increased temperature also accelerates the self-discharge rate that adversely affects energy retention and restricts the usage of SCs in standalone applications. In this study, a detailed electrochemical investigation on the self-discharge behaviour of carbon-based SCs containing an IL, 1-Ethyl-3-methylimidazolium acetate (EMIM Ac), has been carried out in the temperature range RT - 60 °C, and the underlying self-discharge mechanisms are identified. The results reveal that at a high voltage of 1.5 V, the self-discharge is characterized by a combination of charge redistribution and diffusion at both RT and 60 °C. At 60 °C, the diffusion-controlled mechanism dominates at lower voltages over the charge redistribution effect, while at RT both mechanisms contribute to a similar extent. The observed difference in the self-discharge mechanism between RT and 60 °C is explained in terms of a decreased RC time constant (τRC) at elevated temperature, and the same conclusions are potentially applicable to other IL-containing SCs as well.
|
|
10. |
- Haque, Mohammad Mazharul, 1984, et al.
(författare)
-
Ionic liquid electrolyte for supercapacitor with high temperature compatibility
- 2017
-
Ingår i: Journal of Physics: Conference Series. - : IOP Publishing. - 1742-6588 .- 1742-6596. ; 922:1
-
Konferensbidrag (refereegranskat)abstract
- This work describes the electrochemical investigation of two ionic liquids (ILs), 1-ethyl-3-methylimidazolium acetate (EMIM Ac) and 1-butyl-3-methylimidazolium chloride (BMIM Cl), as electrolytes in supercapacitors (SC). A comprehensive study on high temperature (HT) endurance that is required for system integration in microelectronics has also been carried out. It has been found that EMIM Ac containing SC performs better than a BMIM Cl containing SC, and HT treatment improves the capacitive performance.
|
|