1. |
- Zamora, Juan Carlos, et al.
(författare)
-
Considerations and consequences of allowing DNA sequence data as types of fungal taxa
- 2018
-
Ingår i: IMA Fungus. - : INT MYCOLOGICAL ASSOC. - 2210-6340 .- 2210-6359. ; 9:1, s. 167-185
-
Tidskriftsartikel (refereegranskat)abstract
- Nomenclatural type definitions are one of the most important concepts in biological nomenclature. Being physical objects that can be re-studied by other researchers, types permanently link taxonomy (an artificial agreement to classify biological diversity) with nomenclature (an artificial agreement to name biological diversity). Two proposals to amend the International Code of Nomenclature for algae, fungi, and plants (ICN), allowing DNA sequences alone (of any region and extent) to serve as types of taxon names for voucherless fungi (mainly putative taxa from environmental DNA sequences), have been submitted to be voted on at the 11th International Mycological Congress (Puerto Rico, July 2018). We consider various genetic processes affecting the distribution of alleles among taxa and find that alleles may not consistently and uniquely represent the species within which they are contained. Should the proposals be accepted, the meaning of nomenclatural types would change in a fundamental way from physical objects as sources of data to the data themselves. Such changes are conducive to irreproducible science, the potential typification on artefactual data, and massive creation of names with low information content, ultimately causing nomenclatural instability and unnecessary work for future researchers that would stall future explorations of fungal diversity. We conclude that the acceptance of DNA sequences alone as types of names of taxa, under the terms used in the current proposals, is unnecessary and would not solve the problem of naming putative taxa known only from DNA sequences in a scientifically defensible way. As an alternative, we highlight the use of formulas for naming putative taxa (candidate taxa) that do not require any modification of the ICN.
|
|
2. |
- Harra, Juha, et al.
(författare)
-
Characteristics of nFOG, an aerosol-based wet thin film coating technique
- 2018
-
Ingår i: JCT Research. - : Springer Science and Business Media LLC. - 1547-0091 .- 2168-8028 .- 1935-3804. ; 15:3, s. 623-632
-
Tidskriftsartikel (refereegranskat)abstract
- An atmospheric pressure aerosol-based wet thin film coating technique called the nFOG is characterized and applied in polymer film coatings. In the nFOG, a fog of droplets is formed by two air-assist atomizers oriented toward each other inside a deposition chamber. The droplets settle gravitationally and deposit on a substrate, forming a wet film. In this study, the continuous deposition mode of the nFOG is explored. We determined the size distribution of water droplets inside the chamber in a wide side range of 0.1–100 µm and on the substrate using aerosol measurement instruments and optical microscopy, respectively. The droplet size distribution was found to be bimodal with droplets of approximately 30–50 µm contributing the most to the mass of the formed wet film. The complementary measurement methods allow us to estimate the role of different droplet deposition mechanisms. The obtained results suggest that the deposition velocity of the droplets is lower than the calculated terminal settling velocity, likely due to the flow fields inside the chamber. Furthermore, the mass flux of the droplets onto the substrate is determined to be in the order of 1 g/m3s, corresponding to a wet film growth rate of 1 µm/s. Finally, the nFOG technique is demonstrated by preparing polymer films with thicknesses in the range of approximately 0.1–20 µm.
|
|
3. |
- Heydari, Golrokh, 1982-, et al.
(författare)
-
Ultralow ice adhesion on hydrophilic and molecularly smooth mica surfaces
-
Annan publikation (övrigt vetenskapligt/konstnärligt)abstract
- Despite much research on designing surfaces for combating icing, no permanent solution has been achievedusing solid materials. Inspired by the slippery surface of ice, attributed to the presence of a quasi-liquid layeracting as a natural lubricant, we hypothesize that flat hydrophilic surfaces with a hydration layer remaining inthe liquid-like state at the solid-ice interface could result in low ice adhesion. Utilizing temperature-controlledice adhesion measurements on the molecularly smooth basal plane of muscovite mica, we observed the lowestreported ice adhesion on solid surfaces down to temperatures of -35 ºC. The ice adhesion is dramatically higheron flat hydrophilic silica surfaces. We discuss these findings in terms of what is known about mica-water andmica-ice interactions.
|
|
4. |
- Juuti, Paxton, et al.
(författare)
-
Achieving a slippery, liquid-infused porous surface with anti-icing properties by direct deposition of flame synthesized aerosol nanoparticles on a thermally fragile substrate
- 2017
-
Ingår i: Applied Physics Letters. - : AIP Publishing. - 0003-6951 .- 1077-3118. ; 110:16
-
Tidskriftsartikel (refereegranskat)abstract
- Slippery, liquid-infused porous surfaces offer a promising route for producing omniphobic and anti-icing surfaces. Typically, these surfaces are made as a coating with expensive and time consuming assembly methods or with fluorinated films and oils. We report on a route for producing liquid-infused surfaces, which utilizes a liquid precursor fed oxygen-hydrogen flame to produce titania nanoparticles deposited directly on a low-density polyethylene film. This porous nanocoating, with thickness of several hundreds of nanometers, is then filled with silicone oil. The produced surfaces are shown to exhibit excellent anti-icing properties, with an ice adhesion strength of ∼12 kPa, which is an order of magnitude improvement when compared to the plain polyethylene film. The surface was also capable of maintaining this property even after cyclic icing testing.
|
|
5. |
- Niemelä-Anttonen, Henna, et al.
(författare)
-
Icephobicity of Slippery Liquid Infused Porous Surfaces under Multiple Freeze–Thaw and Ice Accretion–Detachment Cycles
- 2018
-
Ingår i: Advanced Materials Interfaces. - : Wiley. - 2196-7350. ; 5:20
-
Tidskriftsartikel (refereegranskat)abstract
- Surface engineering can be used to prevent ice accumulation and adhesion in environments that deal with icing problems. One recent engineering approach, slippery liquid infused porous surfaces (SLIPS), comprises a smooth and slippery lubricating surface, where lubricant is trapped within the pores of a solid material to repel various substances, such as water and ice. However, it remains unclear whether the slippery surfaces retain their icephobic characteristics under the impact of supercooled water droplets or repeated freezing and melting cycles. Here, the icephobic properties of SLIPS are evaluated under multiple droplet freeze–thaw and ice accretion–detachment cycles and compared to hydrophobic and superhydrophobic surfaces. The experiments are designed to mimic real environmental conditions, thus, the icephobicity is investigated in icing wind tunnel, where ice accretion occurs through the impact of supercooled water droplets. The adhesion of ice remained extremely low, <10 kPa, which is four times lower than ice adhesion onto smooth fluoropolymer surfaces, even after repeated ice accretion–detachment cycles. Moreover, cyclic droplet freeze–thaw experiments provide insight into the effects of temperature cycling on SLIPS wettability, showing stable wetting performance. The results suggest liquid infused porous surfaces as a potential solution to icephobicity under challenging and variating environmental conditions.
|
|
6. |
- Närvänen, Elina, et al.
(författare)
-
The assembling of circular consumption: A sociomaterial practice approach
- 2023
-
Ingår i: The Routledge Handbook of Catalysts for a Sustainable Circular Economy. - 9781003267492 - 9781032212449 ; , s. 535-549
-
Bokkapitel (refereegranskat)abstract
- The role of consumers in a circular economy (CE) is crucial but not well understood in the literature. For consumers to become catalysts in a CE, people need to understand how and under what conditions circular consumption is made possible. This chapter conceptualises the sociomaterial assembling of circular consumption, which refers to the process in which heterogeneous elements – meanings, materialities, and competencies – constantly form relations with and shape one another. This chapter also illustrates how this assembling requires a considerable amount of work from consumers. It focuses on the context of fashion, in which more circular production and consumption patterns are urgently needed. Our approach is inspired by narrative knowing, and it builds on qualitative data from a research project in Finland. Each of the narratives follows the biography of the same garment but represents an alternative circular consumption scenario: reducing, reusing, or recycling. The chapter contributes to the literature on circular consumption and has practical implications for involving consumers as catalysts in a CE.
|
|