| 1. |
- Ageron, M., et al.
(författare)
-
ANTARES : The first undersea neutrino telescope
- 2011
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier. - 0168-9002 .- 1872-9576. ; 656:1, s. 11-38
-
Tidskriftsartikel (refereegranskat)abstract
- The ANTARES Neutrino Telescope was completed in May 2008 and is the first operational Neutrino Telescope in the Mediterranean Sea. The main purpose of the detector is to perform neutrino astronomy and the apparatus also offers facilities for marine and Earth sciences. This paper describes the design, the construction and the installation of the telescope in the deep sea, offshore from Toulon in France. An illustration of the detector performance is given. (C) 2011 Elsevier B.V. All rights reserved.
|
|
| 2. |
- Ageron, M., et al.
(författare)
-
Studies of a full-scale mechanical prototype line for the ANTARES neutrino telescope and tests of a prototype instrument for deep-sea acoustic measurements
- 2007
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier. - 0168-9002 .- 1872-9576. ; 581:3, s. 695-708
-
Tidskriftsartikel (refereegranskat)abstract
- full-scale mechanical prototype line was deployed to a depth of 2500 m to test the leak tightness of the electronics containers and the pressure-resistant properties of an electromechanical cable under evaluation for use in the ANTARES deep-sea neutrino telescope. During a month-long immersion study, line parameter data were taken using miniature autonomous data loggers and shore-based optical time domain reflectometry. Details of the mechanical prototype line, the electromechanical cable and data acquisition are presented. Data taken during the immersion study revealed deficiencies in the pressure resistance of the electromechanical cable terminations at the entry points to the electronics containers. The improvements to the termination, which have been integrated into subsequent detection lines, are discussed. The line also allowed deep-sea acoustic measurements with a prototype hydrophone system. The technical setup of this system is described, and the first results of the data analysis are presented. (c) 2007 Elsevier B.V. All rights reserved.
|
|
| 3. |
- Ageron, M., et al.
(författare)
-
The ANTARES optical beacon system
- 2007
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier. - 0168-9002 .- 1872-9576. ; 578:3, s. 498-509
-
Tidskriftsartikel (refereegranskat)abstract
- ANTARES is a neutrino telescope being deployed in the Mediterranean Sea. It consists of a three-dimensional array of photomultiplier tubes that can detect the Cherenkov light induced by charged particles produced in the interactions of neutrinos with the surrounding medium. High angular resolution can be achieved, in particular, when a muon is produced, provided that the Cherenkov photons are detected with sufficient timing precision. Considerations of the intrinsic time uncertainties stemming from the transit time spread in the photomultiplier tubes and the mechanism of transmission of light in sea water lead to the conclusion that a relative time accuracy of the order of 0.5 ns is desirable. Accordingly, different time calibration systems have been developed for the ANTARES telescope. In this article, a system based on Optical Beacons, a set of external and well-controlled pulsed light sources located throughout the detector, is described. This calibration system takes into account the optical properties of sea water, which is used as the detection volume of the ANTARES telescope. The design, tests, construction and first results of the two types of beacons, LED and laser-based, are presented. (C) 2007 Elsevier B.V. All rights reserved.
|
|
| 4. |
- Aguilar, J. A., et al.
(författare)
-
First results of the instrumentation line for the deep-sea ANTARES neutrino telescope
- 2006
-
Ingår i: Astroparticle physics. - : Elsevier. - 0927-6505 .- 1873-2852. ; 26:4-5, s. 314-324
-
Tidskriftsartikel (refereegranskat)abstract
- In 2005, the ANTARES Collaboration deployed and operated at a depth of 2500 m a so-called Mini Instrumentation Line equipped with Optical Modules (MILOM) at the ANTARES site. The various data acquired during the continuous operation from April to December 2005 of the MILOM confirm the satisfactory performance of the Optical Modules, their front-end electronics and readout system. as well as the calibration devices of the detector. The in situ measurement of the Optical Module time response yields a resolution better than 0.5 ns. The performance of the acoustic positioning system, which enables the spatial reconstruction of the ANTARES detector with a precision of about 10 cm, is verified. These results demonstrate that with the full ANTARES neutrino telescope the design angular resolution of better than 0.3 degrees can be realistically achieved.
|
|
| 5. |
- Aguilar, J. A., et al.
(författare)
-
The data acquisition system for the ANTARES neutrino telescope
- 2007
-
Ingår i: Nuclear Instruments and Methods in Physics Research Section A. - : Elsevier. - 0168-9002 .- 1872-9576. ; 570:1, s. 107-116
-
Tidskriftsartikel (refereegranskat)abstract
- The ANTARES neutrino telescope is being constructed in the Mediterranean Sea. It consists of a large three-dimensional array of photo-multiplier tubes. The data acquisition system of the detector takes care of the digitisation of the photo-multiplier tube signals, data transport, data filtering, and data storage. The detector is operated using a control program interfaced with all elements. The design and the implementation of the data acquisition system are described. (c) 2006 Elsevier B.V. All rights reserved.
|
|
| 6. |
- Serra, Immacolata, et al.
(författare)
-
Developing a Collection of Immobilized Nucleoside Phosphorylases for the Preparation of Nucleoside Analogues: Enzymatic Synthesis of Arabinosyladenine and 2,3-Dideoxyinosine
- 2013
-
Ingår i: Collection of Czechoslovak Chemical Communications. - : Wiley. - 2192-6506. ; 78:2, s. 157-165
-
Tidskriftsartikel (refereegranskat)abstract
- The use of nucleoside phosphorylases (NPs; EC 2.4.2.n) represents a convenient alternative to the chemical route for the synthesis of natural and modified nucleosides. We purified four recombinantly expressed nucleoside phosphorylases from the bacterial pathogens Citrobacter koseri, Clostridium perfringens, and Streptococcus pyogenes (CkPNPI, CkPNPII, CpUP, SpUP) and their substrate specificity was investigated towards either natural pyrimidine or purine nucleosides and some analogues, namely, arabinosyladenine (araA) and 2,3-dideoxyinosine (ddI). A 23% activity towards these latter compounds (compared to the natural substrates) was observed. Enzyme activities were compared to the specificities obtained for the enzymes pyrimidine nucleoside phosphorylase from Bacillus subtilis (BsPyNP) and purine nucleoside phosphorylase from Aeromonas hydrophila (AhPNPII) previously reported by some of the authors. The enzymes displaying the suitable specificity for the synthesis of araA and ddI were immobilized on aldehydeagarose. The immobilized preparations were highly stable at alkaline pH and in the presence of methanol or acetonitrile as cosolvent. They were used in the synthesis of araA and ddI by a one-pot, bienzymatic transglycosylation achieving 74 and 44% conversion, respectively.
|
|
| 7. |
- Andreani, Pietro, et al.
(författare)
-
Multihit multichannel time-to-digital converter with ±1% differential nonlinearity and near optimal time resolution
- 1998
-
Ingår i: IEEE Journal of Solid-State Circuits. - : Institute of Electrical and Electronics Engineers (IEEE). - 0018-9200. ; 33:4, s. 650-656
-
Tidskriftsartikel (refereegranskat)abstract
- An eight-channel, 1 ns bin-size, 23 b dynamic range, single-chip, multihit, time-to-digital converter (TDC) is presented in this paper. A new architecture mixing two previous TDC realizations has been adopted. The chip can execute common-start or common-stop operations on the trailing, leading, or both transitions of the input channels; it stores at least 32 events/channel with a double-hit resolution of 16 ns. A prototype of about 120 mm2 has been integrated into a double-metal, single-poly, n-well 1 μm CMOS process, and its performance has been compared to that of similar devices. Test results show that a differential nonlinearity error of ±1%, an integral nonlinearity less than 0.2 least significant hit (LSB), and a time resolution of 0.443 LSB-significantly better than those of comparable TDCs and very close to the theoretical limit of 0.408 LSB-have been achieved
|
|
| 8. |
- Christoffersen, Stig, et al.
(författare)
-
Nucleoside phosphorylases from clostridium perfringens in the synthesis of 2',3'-dideoxyinosine.
- 2010
-
Ingår i: Nucleosides, Nucleotides & Nucleic Acids. - : Informa UK Limited. - 1525-7770 .- 1532-2335. ; 29:4-6, s. 445-448
-
Tidskriftsartikel (refereegranskat)abstract
- Four Clostridium perfringens phosphorylases were subcloned, overexpressed and analyzed for their substrate specificity. DeoD(1) and PunA could use a variety of purine substrates, including an antiviral drug 2',3'-dideoxyinosine (ddI). In one-pot synthesis using Clostridium phosphorylases, 2',3'-dideoxyuridine and hypoxanthine were converted to ddI at yield of about 30%.
|
|
| 9. |
|
|
| 10. |
|
|
