| 1. |
- Bhatti, Adeel Liaquat, et al.
(författare)
-
An Efficient and Functional Fe3O4/Co3O4 Composite for Oxygen Evolution Reaction
- 2021
-
Ingår i: Journal of Nanoscience and Nanotechnology. - : AMER SCIENTIFIC PUBLISHERS. - 1533-4880 .- 1533-4899. ; 21:4, s. 2675-2680
-
Tidskriftsartikel (refereegranskat)abstract
- The design of efficient, stable, durable and noble metal free electro catalysts for oxygen evolution reaction (OER) are of immediate need, but very challenging task. In this study, iron induction into cobalt oxide (Co3O4) has resulted composite structure by wet chemical method. The iron impurity has brought an electronic disorder into Fe3O4/cobalt oxide composite thereby efficient oxygen evolution reaction is demonstrated. An addition of iron content into composite resulted the alternation of morphology from Nano rods to clusters of nanoparticles. The successive addition of iron into composite system reduced the onset potential of OER as compared to the pristine cobalt oxide. A Tafel slope of 80 mVdec(-1) indicates the favorable oxygen evolution reaction kinetics on the sample 4. An over-potential of 370 mV is required to reach a 10 mAcm(-2) current density which is acceptable for a nonprecious catalyst. The catalyst is highly durable and stable for 30 hours. Electrochemical impedance spectroscopy further provided a deeper insight on charge transfer resistance and sample 4 has low charge transfer resistance that supported the OER polarization curves. The sample 4 has more electrochemical active surface area of 393.5 cm(2). These obtained results are exciting and highlighting the importance of composite structure and leave a huge space for the future investigations on composite materials for energy related applications.
|
|
| 2. |
- Arslan, Muhammad, et al.
(författare)
-
Impact of Varying Load Conditions and Cooling Energy Comparison of a Double-Inlet Pulse Tube Refrigerator
- 2020
-
Ingår i: Processes. - : MDPI. - 2227-9717. ; 8:3
-
Tidskriftsartikel (refereegranskat)abstract
- Modeling and optimization of a double-inlet pulse tube refrigerator (DIPTR) is very difficult due to its geometry and nature. The objective of this paper was to optimize-DIPTR through experiments with the cold heat exchanger (CHX) along the comparison of cooling load with experimental data using different boundary conditions. To predict its performance, a detailed two-dimensional DIPTR model was developed. A double-drop pulse pipe cooler was used for solving continuity, dynamic and power calculations. External conditions for applicable boundaries include sinusoidal pressure from an end of the tube from a user-defined function and constant temperature or limitations of thermal flux within the outer walls of exchanger walls under colder conditions. The results of the system's cooling behavior were reported, along with the connection between the mass flow rates, heat distribution along pulse tube and cold-end pressure, the cooler load's wall temp profile and cooler loads with varied boundary conditions i.e. opening of 20% double-inlet and 40-60% orifice valves, respectively. Different loading conditions of 1 and 5W were applied on the CHX. At 150 K temperature of the cold-end heat exchanger, a maximum load of 3.7 W was achieved. The results also reveal a strong correlation between computational fluid dynamics modeling results and experimental results of the DIPTR.
|
|
| 3. |
- Bhatti, Adeel Liaquat, et al.
(författare)
-
Facile doping of nickel into Co3O4 nanostructures to make them efficient for catalyzing the oxygen evolution reaction
- 2020
-
Ingår i: RSC Advances. - : Royal Society of Chemistry. - 2046-2069. ; 10:22, s. 12962-12969
-
Tidskriftsartikel (refereegranskat)abstract
- Designing a facile and low-cost methodology to fabricate earth-abundant catalysts is very much needed for a wide range of applications. Herein, a simple and straightforward approach was developed to tune the electronic properties of cobalt oxide nanostructures by doping them with nickel and then using them to catalyze the oxygen evolution reaction (OER) in an aqueous solution of 1.0 M KOH. The addition of a nickel impurity improved the conductivity of the cobalt oxide, and further increased its activity towards the OER. Analytical techniques such as scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and powder X-ray diffraction (XRD) were used to investigate, respectively, the morphology, composition and crystalline structure of the materials used. The nickel-doped cobalt oxide material showed randomly oriented nanowires and a high density of nanoparticles, exhibited the cubic phase, and contained cobalt, nickel and oxygen as its main elements. The nickel-doped cobalt oxide also yielded a Tafel slope of 82 mV dec(-1) and required an overpotential of 300 mV to reach a current density of 10 mA cm(-2). As an OER catalyst, it was shown to be durable for 40 h. Electrochemical impedance spectroscopy (EIS) analysis showed a low charge-transfer resistance of 177.5 ohms for the nickel-doped cobalt oxide, which provided a further example of its excellent OER performance. These results taken together indicated that nickel doping of cobalt oxide can be accomplished via a facile approach and that the product of this doping can be used for energy and environmental applications.
|
|
| 4. |
- Hanan, Abdul, et al.
(författare)
-
PdO@CoSe2 composites: efficient electrocatalysts for water oxidation in alkaline media
- 2022
-
Ingår i: RSC Advances. - : ROYAL SOC CHEMISTRY. - 2046-2069. ; 13:1, s. 743-755
-
Tidskriftsartikel (refereegranskat)abstract
- In this study, we have prepared cobalt selenide (CoSe2) due to its useful aspects from a catalysis point of view such as abundant active sites from Se edges, and significant stability in alkaline conditions. CoSe2, however, has yet to prove its functionality, so we doped palladium oxide (PdO) onto CoSe2 nanostructures using ultraviolet (UV) light, resulting in an efficient and stable water oxidation composite. The crystal arrays, morphology, and chemical composition of the surface were studied using a variety of characterization techniques, including X-ray diffraction (XRD), scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared (FTIR) spectroscopy. It was also demonstrated that the composite systems were heterogeneous in their morphology, undergoing a shift in their diffraction patterns, suffering from a variety of metal oxidation states and surface defects. The water oxidation was verified by a low overpotential of 260 mV at a current density of 20 mA cm(-2) with a Tafel Slope value of 57 mV dec(-1). The presence of multi metal oxidation states, rich surface edges of Se and favorable charge transport played a leading role towards water oxidation with a low energy demand. Furthermore, 48 h of durability is associated with the composite system. With the use of PdO and CoSe2, new, low efficiency, simple electrocatalysts for water catalysis have been developed, enabling the development of practical energy conversion and storage systems. This is an excellent alternative approach for fostering growth in the field.
|
|
| 5. |
- Adelani, David, et al.
(författare)
-
A Few Thousand Translations Go A Long Way! Leveraging Pre-trained Models for African News Translation
- 2022
-
Ingår i: NAACL 2022. - Stroudsburg : Association for Computational Linguistics. - 9781955917711 ; , s. 3053-3070
-
Konferensbidrag (refereegranskat)abstract
- Recent advances in the pre-training of language models leverage large-scale datasets to create multilingual models. However, low-resource languages are mostly left out in these datasets. This is primarily because many widely spoken languages are not well represented on the web and therefore excluded from the large-scale crawls used to create datasets. Furthermore, downstream users of these models are restricted to the selection of languages originally chosen for pre-training. This work investigates how to optimally leverage existing pre-trained models to create low-resource translation systems for 16 African languages. We focus on two questions: 1) How can pre-trained models be used for languages not included in the initial pre-training? and 2) How can the resulting translation models effectively transfer to new domains? To answer these questions, we create a new African news corpus covering 16 languages, of which eight languages are not part of any existing evaluation dataset. We demonstrate that the most effective strategy for transferring both to additional languages and to additional domains is to fine-tune large pre-trained models on small quantities of high-quality translation data.
|
|
| 6. |
- Aftab, Umair, et al.
(författare)
-
Mixed CoS2@Co3O4 composite material: An efficient nonprecious electrocatalyst for hydrogen evolution reaction
- 2020
-
Ingår i: International journal of hydrogen energy. - : PERGAMON-ELSEVIER SCIENCE LTD. - 0360-3199 .- 1879-3487. ; 45:27, s. 13805-13813
-
Tidskriftsartikel (refereegranskat)abstract
- Hydrogen evolution reaction (HER) has been identified as a sustainable and environment friendly technology for a wide range of energy conversion and storage applications. The big barrier in realizing this green technology requires a highly efficient, earth-abundant, and low-cost electrocatalyst for HER. Various HER catalysts have been designed and reported, still, their performance is not up to the mark of Pt. Among them, cobalt-based, especially cobalt disulfide (CoS2) has shown significant HER activity and found suitable candidature for HER due to its low cost, simple to prepare, and exhibits good stability. Herein, we synthesized various nanostructured materials including pure CoS2, Co3O4 and their composites by wet chemical methods and found them active for HER. The scanning electron microscopy (SEM) has revealed a morphology of composite as a mixture of nanowires and round shape spherical nanoparticles with several microns in dimension. The X-ray diffraction (XRD) confirmed the cubic phase of CoS2 and cubic phase of Co3O4 in the composite materials. The chemical deposition of CoS2 onto Co3O4 has tailored the HER activity of CoS2@Co3O4 composite material. Two CoS2@Co3O4 composite materials were produced with varying amounts of Co3O4 and labeled as samples 1 and 2. The Co3O4 reduced the adsorption energy for hydrogen, decreased the aggregation of CoS2 and uplifted the stability of CoS2@Co3O4 a composite material in alkaline media. Sample 1 requires an overpotential of 320 mV to reach a current density of 10 mA/cm(2) and it exhibits a Tafel slope of 42 mVdec(-1) which is the key indicator for the fast HER kinetics on sample 1. The sample 1 is highly durable for 50 h and also it has excellent stability. The electrochemical impedance spectroscopy (EIS) revealed a small charge transfer resistance of 28.81 Ohms for the sample 1 with high capacitance double-layer value of 0.81 mF. EIS has supported polarization and Tafel slope results. Based on the partial physical characterization and the electrochemical results, the as-obtained sample 1 (CoS2@Co3O4 composite material) will find potential applications in an extended range of energy conversion and storage devices owing to its low cost, high abundance, and excellent efficiency. (C) 2020 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.
|
|
| 7. |
- Aftab, Umair, et al.
(författare)
-
Nickel-cobalt bimetallic sulfide NiCo(2)S(4)nanostructures for a robust hydrogen evolution reaction in acidic media
- 2020
-
Ingår i: RSC Advances. - : Royal Society of Chemistry. - 2046-2069. ; 10:37, s. 22196-22203
-
Tidskriftsartikel (refereegranskat)abstract
- There are many challenges associated with the fabrication of efficient, inexpensive, durable and very stable nonprecious metal catalysts for the hydrogen evolution reaction (HER). In this study, we have designed a facile strategy by tailoring the concentration of precursors to successfully obtain nickel-cobalt bimetallic sulfide (NiCo2S4) using a simple hydrothermal method. The morphology of the newly prepared NiCo(2)S(4)comprised a mixture of microparticles and nanorods, which were few microns in dimension. The crystallinity of the composite sample was found to be excellent with a cubic phase. The sample that contained a higher amount of cobalt compared to nickel and produced single-phase NiCo(2)S(4)exhibited considerably improved HER performance. The variation in the salt precursor concentration during the synthesis of a material is a simple methodology to produce a scalable platinum-free catalyst for HER. The advantageous features of the multiple active sites of cobalt in the CN-21 sample as compared to that for pristine CoS and NiS laid the foundation for the provision of abundant active edges for HER. The composite sample produced a current density of 10 mA cm(-2)at an overpotential of 345 mV. Also, it exhibited a Tafel value of 60 mV dec(-1), which predominantly ensured rapid charge transfer kinetics during HER. CN-21 was highly durable and stable for 30 hours. Electrochemical impedance spectroscopy showed that the charge transfer resistance was 21.88 ohms, which further validated the HER polarization curves and Tafel results. CN-21 exhibited a double layer capacitance of 4.69 mu F cm(-2)and a significant electrochemically active surface area of 134.0 cm(2), which again supported the robust efficiency for HER. The obtained results reveal that our developed NiCo(2)S(4)catalyst has a high density of active edges, and it is a non-noble metal catalyst for the hydrogen evolution reaction. The present findings provide an alternative strategy and an active nonprecious material for the development of energy-related applications.
|
|
| 8. |
- Aftab, Umair, et al.
(författare)
-
The chemically reduced CuO-Co3O4 composite as a highly efficient electrocatalyst for oxygen evolution reaction in alkaline media
- 2019
-
Ingår i: Catalysis Science & Technology. - : ROYAL SOC CHEMISTRY. - 2044-4753 .- 2044-4761. ; 9:22, s. 6274-6284
-
Tidskriftsartikel (refereegranskat)abstract
- The fabrication of efficient, alkaline-stable and nonprecious electrocatalysts for the oxygen evolution reaction is highly needed; however, it is a challenging task. Herein, we report a noble metal-free advanced catalyst, i.e. the chemically reduced mixed transition metal oxide CuO-Co3O4 composite, with outstanding oxygen evolution reaction activity in alkaline media. Sodium borohydride (NaBH4) was used as a reducing agent for the mixed transition metal oxide CuO-Co3O4. The chemically reduced composite carried mixed valence states of Cu and Co, which played a dynamic role in driving an excellent oxygen evolution reaction process. The X-ray photo-electron spectroscopy (XPS) study confirmed high density of active sites in the treated sample with a large number of oxygen vacancies. The developed electrocatalyst showed the lowest overpotential of 144.5 mV vs. the reversible hydrogen electrode (RHE) to achieve the current density of 40 mA cm(-2) and remained stable for 40 hours throughout the chronoamperometry test at the constant potential of 1.39 V vs. RHE. Moreover, the chemically reduced composite was highly durable. Electrochemical impedance spectroscopy (EIS) confirmed the low charge transfer resistance of 13.53 ohms for the chemically reduced composite, which was 50 and 26 times smaller than that of Co3O4 and untreated CuO-Co3O4, respectively. The electrochemically active surface area for the chemically reduced composite was found to be greater than that for pristine CuO, Co3O4 and untreated pristine CuO-Co3O4. These findings reveal the possibility of a new gateway for the capitalization of a chemically reduced sample into diverse energy storage and conversion systems such as lithium-ion batteries and supercapacitors.
|
|
| 9. |
- Aftab, Umair, et al.
(författare)
-
Two step synthesis of TiO2–Co3O4 composite for efficient oxygen evolution reaction
- 2021
-
Ingår i: International journal of hydrogen energy. - : Elsevier. - 0360-3199 .- 1879-3487. ; 46:13, s. 9110-9122
-
Tidskriftsartikel (refereegranskat)abstract
- For an active hydrogen gas generation through water dissociation, the sluggish oxygen evolution reaction (OER) kinetics due to large overpotential is a main hindrance. Herein, a simple approach is used to produce composite material based on TiO2/Co3O4 for efficient OER and overpotential is linearly reduced with increasing amount of TiO2. The scanning electron microscopy (SEM) and high resolution transmission electron microscopy (HRTEM) investigations reveal the wire like morphology of composite materials, formed by the self-assembly of nanoparticles. The titania nanoparticles were homogenously distributed on the larger Co3O4 nanoparticles. The powder x-ray diffraction revealed a tetragonal phase of TiO2 and the cubic phase of Co3O4 in the composite materials. Composite samples with increasing TiO2 content were obtained (18%, 33%, 41% and 65% wt.). Among the composites, cobalt oxide-titanium oxide with the highest TiO2 content (CT-20) possesses the lowest overpotential for OER with a Tafel slope of 60 mV dec−1 and an exchange current density of 2.98 × 10−3A/cm2. The CT-20 is highly durable for 45 h at different current densities of 10, 20 and 30 mA/cm2. Electrochemical impedance spectroscopy (EIS) confirmed the fast charge transport for the CT-20 sample, which potentially accelerated the OER kinetics. These results based on a two-step methodology for the synthesis of TiO2/Co3O4 material can be useful and interesting for various energy storage and energy conversion systems.
|
|
| 10. |
- Amin, Muhammad Umair, et al.
(författare)
-
Co-delivery of carbonic anhydrase IX inhibitor and doxorubicin as a promising approach to address hypoxia-induced chemoresistance
- 2022
-
Ingår i: Drug Delivery. - : Informa UK Limited. - 1071-7544 .- 1521-0464. ; 29:1, s. 2072-2085
-
Tidskriftsartikel (refereegranskat)abstract
- Hypoxia, an oxygen-deprived condition of the tumor, is one of the major reasons for resistance to chemotherapy. Carbonic anhydrases are generally involved in pH homeostasis in normal conditions, but in solid tumors having a strong relation with hypoxia, the carbonic anhydrase IX (CA-IX) enzyme is overexpressed and results in an extracellular acidic environment. For most weakly basic anticancer drugs, including doxorubicin (Dox), the ionization in an acidic environment limits their cellular uptake, and consequently, the tumor exposure to the drug at sub-therapeutic concentration comes out as chemoresistance. Herein, a combined drug delivery system of liposomes and mesoporous silica nanoparticles (MSNPs) was developed for the co-delivery of the CA-IX enzyme inhibitor and Dox in hypoxic condition. The unique structure of MSNPs with higher surface area was utilized for higher drug loading and sustained release of Dox. Additionally, the biocompatible nature of liposomal coating as a second loading site for the CA-IX enzyme inhibitor has provided gatekeeping effects at pore opening to avoid premature drug release. Lipid coated MSNPs as a co-delivery system for Dox and the CA-IX inhibitor have synergistic cytotoxic effects against MDA-MB 231 breast cancer cells in hypoxic conditions. These findings assure the potential of this drug delivery system to overcome hypoxia-related chemoresistance.
|
|
