| 1. |
|
|
| 2. |
- Kristanl, Matej, et al.
(författare)
-
The Seventh Visual Object Tracking VOT2019 Challenge Results
- 2019
-
Ingår i: 2019 IEEE/CVF INTERNATIONAL CONFERENCE ON COMPUTER VISION WORKSHOPS (ICCVW). - : IEEE COMPUTER SOC. - 9781728150239 ; , s. 2206-2241
-
Konferensbidrag (refereegranskat)abstract
- The Visual Object Tracking challenge VOT2019 is the seventh annual tracker benchmarking activity organized by the VOT initiative. Results of 81 trackers are presented; many are state-of-the-art trackers published at major computer vision conferences or in journals in the recent years. The evaluation included the standard VOT and other popular methodologies for short-term tracking analysis as well as the standard VOT methodology for long-term tracking analysis. The VOT2019 challenge was composed of five challenges focusing on different tracking domains: (i) VOT-ST2019 challenge focused on short-term tracking in RGB, (ii) VOT-RT2019 challenge focused on "real-time" short-term tracking in RGB, (iii) VOT-LT2019 focused on long-term tracking namely coping with target disappearance and reappearance. Two new challenges have been introduced: (iv) VOT-RGBT2019 challenge focused on short-term tracking in RGB and thermal imagery and (v) VOT-RGBD2019 challenge focused on long-term tracking in RGB and depth imagery. The VOT-ST2019, VOT-RT2019 and VOT-LT2019 datasets were refreshed while new datasets were introduced for VOT-RGBT2019 and VOT-RGBD2019. The VOT toolkit has been updated to support both standard short-term, long-term tracking and tracking with multi-channel imagery. Performance of the tested trackers typically by far exceeds standard baselines. The source code for most of the trackers is publicly available from the VOT page. The dataset, the evaluation kit and the results are publicly available at the challenge website(1).
|
|
| 3. |
|
|
| 4. |
- Miao, Yanfeng, et al.
(författare)
-
Stable and bright formamidinium-based perovskite light-emitting diodes with high energy conversion efficiency
- 2019
-
Ingår i: Nature Communications. - : NATURE PUBLISHING GROUP. - 2041-1723. ; 10
-
Tidskriftsartikel (refereegranskat)abstract
- Solution-processable perovskites show highly emissive and good charge transport, making them attractive for low-cost light-emitting diodes (LEDs) with high energy conversion efficiencies. Despite recent advances in device efficiency, the stability of perovskite LEDs is still a major obstacle. Here, we demonstrate stable and bright perovskite LEDs with high energy conversion efficiencies by optimizing formamidinium lead iodide films. Our LEDs show an energy conversion efficiency of 10.7%, and an external quantum efficiency of 14.2% without outcoupling enhancement through controlling the concentration of the precursor solutions. The device shows low efficiency droop, i.e. 8.3% energy conversion efficiency and 14.0% external quantum efficiency at a current density of 300 mA cm(-2), making the device more efficient than state-of-the-art organic and quantum-dot LEDs at high current densities. Furthermore, the half-lifetime of device with benzylamine treatment is 23.7 hr under a current density of 100 mA cm(-2), comparable to the lifetime of near-infrared organic LEDs.
|
|
| 5. |
- Wang, Yuhang, et al.
(författare)
-
Purification and characterization of recombinant human bile salt-stimulated lipase expressed in milk of transgenic cloned cows
- 2017
-
Ingår i: PLOS ONE. - : PUBLIC LIBRARY SCIENCE. - 1932-6203. ; 12:5
-
Tidskriftsartikel (refereegranskat)abstract
- Bile salt-stimulated lipase (BSSL) is a lipolytic digestive enzyme with broad substrate specificity secreted from exocrine pancreas into the intestinal lumen in all species and from the lactating mammary gland into the milk of some species, notably humans but not cows. BSSL in breast milk facilitates digestion and absorption of milk fat and promotes growth of small for gestational age preterm infants. Thus, purified recombinant human BSSL (rhBSSL) can be used for treatment of patients with fat malabsorption and expressing rhBSSL in the milk of transgenic cloned cows would therefore be a mean to meet a medical need. In the present study, a vector pBAC-hLF-hBSSL was constructed, which efficiently expressed active rhBSSL in milk of transgenic cloned cows to a concentration of 9.8 mg/ml. The rhBSSL purified from cow milk had the same enzymatic activity, N-terminal amino acid sequence, amino acid composition and isoelectric point and similar physicochemical characteristics as human native BSSL. Our study supports the use of transgenic cattle for the cost-competitive, large-scale production of therapeutic rhBSSL.
|
|
| 6. |
- Wang, Yong, et al.
(författare)
-
Research on Pharmaceutical Supply Chain Decision-Making Model Considering Output and Demand Fluctuations
- 2024
-
Ingår i: IEEE Access. - : Institute of Electrical and Electronics Engineers (IEEE). - 2169-3536. ; 12, s. 61629-61641
-
Tidskriftsartikel (refereegranskat)abstract
- In response to the evolving pharmaceutical supply chain market, which is shifting from a seller's to a buyer's market, this study introduces an innovative decision-making model that addresses the volatility in output and demand. Our primary innovation lies in the development of a "revenue-sharing plus margin" collaborative decision-making optimization model, designed to enhance supply chain coordination amidst uncertainty. By establishing a revenue function, we propose a coordinated approach that leverages both revenue-sharing coefficients and profit margins to achieve Pareto improvements for supply chain partners. Through numerical analysis, we identify an optimal value range for the model's parameters, demonstrating the model's efficacy in balancing the expected returns for both suppliers and retailers. The study's contributions are threefold: (1) the introduction of a novel decision-making model tailored to the pharmaceutical supply chain, (2) the provision of a clear framework for comparing collaborative versus decentralized decision-making outcomes, and (3) the empirical validation of the model through case studies, showcasing its superiority in overall supply chain efficiency. This research significantly extends the current literature by providing a nuanced understanding of how supply chain coordination can be optimized under conditions of uncertainty. The findings underscore the importance of collaborative decision-making in achieving supply chain stability and offer practical insights for supply chain management in the pharmaceutical industry.
|
|
| 7. |
- Yang, Fangkai, et al.
(författare)
-
Diffusion-Based Time Series Data Imputation for Cloud Failure Prediction at Microsoft 365
- 2023
-
Ingår i: ESEC/FSE 2023 - Proceedings of the 31st ACM Joint Meeting European Software Engineering Conference and Symposium on the Foundations of Software Engineering. - : Association for Computing Machinery (ACM). ; , s. 2050-2055
-
Konferensbidrag (refereegranskat)abstract
- Ensuring reliability in large-scale cloud systems like Microsoft 365 is crucial. Cloud failures, such as disk and node failure, threaten service reliability, causing service interruptions and financial loss. Existing works focus on failure prediction and proactively taking action before failures happen. However, they suffer from poor data quality, like data missing in model training and prediction, which limits performance. In this paper, we focus on enhancing data quality through data imputation by the proposed Diffusion+, a sample-efficient diffusion model, to impute the missing data efficiently conditioned on the observed data. Experiments with industrial datasets and application practice show that our model contributes to improving the performance of downstream failure prediction.
|
|
| 8. |
- Bian, Wenjie, et al.
(författare)
-
Diffusion behavior of Se(IV) and Re(VII) in biotite: effects of dry density and ionic strength
- 2023
-
Ingår i: Journal of Radioanalytical and Nuclear Chemistry. - : Springer Nature. - 0236-5731 .- 1588-2780. ; 332:11, s. 4413-4425
-
Tidskriftsartikel (refereegranskat)abstract
- Biotite is an important adsorption carrier in the constituent minerals of Beishan granite. In this work, the effects of compaction density and ionic strength on the diffusion behavior of Se(IV) and Re(VII) in biotite were studied by capillary in-diffusion method and diffusion cell through-diffusion method. When the compaction density decreases or the ionic strength increases, the apparent diffusion coefficient increases, and its values range between 10–11 and 10–9 m2/s. The relationship between De and εacc, ionic strength and εacc was fitted using Archie's law and compared with the parameters of other researchers.
|
|
| 9. |
- Cao, Dafu, et al.
(författare)
-
Study on the flexural behaviors of rc beams after Freeze-Thaw cycles
- 2015
-
Ingår i: International Journal of Civil Engineering. - 1735-0522. ; 13:1, s. 92-101
-
Tidskriftsartikel (refereegranskat)abstract
- order to investigate the flexural behaviors of RC beams after freeze-thaw cycles, compressive strength test of concrete cubes after 0, 50, 100, 125 freeze-thaw cycles were made, and static flexural experiment of 48 RC beams after 0, 50, 100, 125 freeze-thaw cycles were made. The relationships of relative compressive strength, mass loss rate, relative dynamic elastic modulus and numbers of freeze-thaw cycles were analyzed. The influences of different numbers of freeze-thaw cycles on the flexural behaviors of RC beams with different concrete grades were studied. The results show that concrete cubes’ mass, relative dynamic elastic modulus and compressive strength decrease with the increasing of freeze-thaw cycles, and high-strength grade concrete could slow down the damage caused by freeze-thaw cycles. Experimental values of test beams stiffness under short-term load were smaller than theory value. Some under-reinforced RC beams occurs over-reinforced failure mode after freeze-thaw cycles. Boundary reinforcement ratio of RC beams after certain numbers of freeze-thaw cycles was derived and its correctness was verified by experiment. Current code for design of concrete structures about crack load and ultimate load are still suitable for RC beams after freeze-thaw cycles
|
|
| 10. |
|
|
